cLMeshProfileDot11aBhaulRateDot11axSpatialStream
CISCO-LWAPP-MESH-MIB ·
.1.3.6.1.4.1.9.9.616.1.1.3.1.34
Object
column
r/w
Unsigned32
This object specifies the 802.11ax mcs spatial stream for Mesh backhaul tx traffic with 802.11a radio.
Context
- MIB
- CISCO-LWAPP-MESH-MIB
- OID
.1.3.6.1.4.1.9.9.616.1.1.3.1.34- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- clMeshProfileEntry
- Table
- clMeshProfileTable
- Siblings
- 33
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLMeshProfileName This object uniquely identifies a Mesh Profile. | column | OctetString | .1.3.6.1.4.1.9.9.616.1.1.3.1.1 |
| cLMeshProfileIdsState This object specifies if Ids reporting is enabled or
not for Mesh APs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.3.1.10 |
| cLMeshProfileMulticastMode This object specifies multicast mode for ethernet
bridged clients. | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.3.1.11 |
| cLMeshProfileRange This object specifies the optimal distance in feet
between RAP and MAP for backhaul link without
degrading SNR value. | column | feet SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.616.1.1.3.1.12 |
| cLMeshProfileSecurityMode This object specifies authentication mode of RAP and
MAP mesh nodes in controller.
none - no authentication is done.
psk - pre shared key. Keys provided during manufacturing
… | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.3.1.13 |
| cLMeshProfileConvergenceMethod This object specifies convergence method used by AP
during link failure. | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.3.1.14 |
| cLMeshProfileLscOnlyAuthentication This object specifies status of
cLMeshProfileLscOnlyAuthentication | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.3.1.15 |
| cLMeshProfileBridgeGroupName This object indicates bridge group name configured
for mesh APs. | column | OctetString | .1.3.6.1.4.1.9.9.616.1.1.3.1.16 |
| cLMeshProfileBGNStrictmatch This object specifies whether an AP
operating in mesh mode needs to have
strict bridge group matching enabled
or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.3.1.17 |
| cLMeshProfileEthernetBridging This object specifies whether ethernet bridging is
enabled or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.3.1.18 |
| cLMeshProfileBatteryState This object specifies if battery state
will be updated by AP or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.3.1.19 |
| cLMeshProfileDescr This object specifies a human-readable description
of the profile. | column | OctetString | .1.3.6.1.4.1.9.9.616.1.1.3.1.2 |
| cLMeshProfileAuthorizationMethod This object specifies authorization method for
mesh APs. | column | OctetString | .1.3.6.1.4.1.9.9.616.1.1.3.1.20 |
| cLMeshProfileAuthenticationMethod This object specifies authentication method for
mesh APs. | column | OctetString | .1.3.6.1.4.1.9.9.616.1.1.3.1.21 |
| cLMeshProfileDot11bgBhaulRateType This object specifies mesh backhaul data rate type
for 802.11bg backhaul radio | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.3.1.22 |
| cLMeshProfileDot11bgBhaulRate This object specifies the 802.11bg data rate for
Mesh backhaul tx traffic. | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.3.1.23 |
| cLMeshProfileDot11bgBhaulRateDot11nMcsIndex This object specifies the 802.11n mcs index for
Mesh backhaul tx traffic with 802.11bg radio | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.616.1.1.3.1.24 |
| cLMeshProfileDot11aBhaulRateType This object specifies mesh backhaul data rate type
for 802.11a backhaul radio. | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.3.1.25 |
| cLMeshProfileDot11aBhaulRate This object specifies the 802.11a data rate for
Mesh backhaul tx traffic. | column | Enumeration | .1.3.6.1.4.1.9.9.616.1.1.3.1.26 |
| cLMeshProfileDot11aBhaulRateDot11nMcsIndex This object specifies the 802.11n mcs index for
Mesh backhaul tx traffic with 802.11a radio. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.616.1.1.3.1.27 |
| cLMeshProfileDot11aBhaulRateDot11acMcsIndex This object specifies the 802.11ac mcs index for
Mesh backhaul tx traffic with 802.11a radio. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.616.1.1.3.1.28 |
| cLMeshProfileDot11aBhaulRateDot11acSpatialStream This object specifies the 802.11ac mcs spatial stream for
Mesh backhaul tx traffic with 802.11a radio. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.616.1.1.3.1.29 |
| cLMeshProfileASTools This object specifies if anti-stranding tools are
enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.3.1.3 |
| clMeshProfileRowStatus This object specifies the status column for this row and used
to create and delete specific instances of rows
in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.616.1.1.3.1.30 |
| cLMeshProfileDot11bgBhaulRateDot11axMcsIndex This object specifies the 802.11ax mcs index for
Mesh backhaul tx traffic with 802.11bg radio. | column | Unsigned32 | .1.3.6.1.4.1.9.9.616.1.1.3.1.31 |
| cLMeshProfileDot11bgBhaulRateDot11axSpatialStream This object specifies the 802.11ax mcs spatial stream for
Mesh backhaul tx traffic with 802.11bg radio. | column | Unsigned32 | .1.3.6.1.4.1.9.9.616.1.1.3.1.32 |
| cLMeshProfileDot11aBhaulRateDot11axMcsIndex This object specifies the 802.11ax mcs index for
Mesh backhaul tx traffic with 802.11a radio. | column | Unsigned32 | .1.3.6.1.4.1.9.9.616.1.1.3.1.33 |
| cLMeshProfileAmsdu This object specifies if aggregation of MSDU is
enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.3.1.4 |
| cLMeshProfileBackgroundScan This object specifies if background scanning is
enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.3.1.5 |
| cLMeshProfileCcnMode This object specifies if change channel
notification needs to be sent or not by
parent AP to all its children when parent
AP changes channel | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.3.1.6 |
| cLMeshProfileUniversalAccess This object specifies if client can
connect to backhaul radio or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.3.1.7 |
| cLMeshProfileEtherVlanTransparent This object specifies the vlan transparent mode
status. Vlan transparent mode will allow all the
VLANs on secondary ethernet interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.3.1.8 |
| cLMeshProfileFullSectorDfs This object specifies whether DFS is enabled or
not in Mesh network. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.616.1.1.3.1.9 |