CISCO-DOCS-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
24
Rows
24
Columns
156
.1.3.6.1.4.1.9.9.116.1.1.1 · 1 row entry · 5 columns
For each upstream interface, this table maintains a number 
of objects related to Quality of Service scheduler which uses
these attributes to control cable modem registration.
cdxQosCtrlUpEntry entry .1.3.6.1.4.1.9.9.116.1.1.1.1
A list of attributes for each upstream MAC scheduler
that supports Quality of Service. Entries in this table
exist for each ifEntry with ifType of docsCableUpstream(129).
Indexes
IF-MIBifIndex
Column Syntax OID
cdxQosCtrlUpAdmissionCtrl
The admission control status for minimum guaranteed upstream
bandwidth scheduling service requests for this upstream.

When this object is set to 'true', if there is a new modem
with minimum guaranteed u…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.116.1.1.1.1.1
cdxQosCtrlUpMaxRsvdBWPercent
The percentage of upstream maximum reserved bandwidth to the
raw bandwidth if the admission control is enabled on this
upstream.

For example, if the upstream interface has raw bandwidth
1,600,000 bits…
percentInteger32r/w
Constraints:
range: 10-1000
.1.3.6.1.4.1.9.9.116.1.1.1.1.2
cdxQosCtrlUpAdmissionRejects
The count of cable modem registration requests rejected on
this upstream interface due to insufficient reserved
bandwidth for serving the cable modems with Unsolicited
Grant Service (UGS) scheduling service when UGS …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.1.1.1.3
cdxQosCtrlUpReservedBW
The current total reserved bandwidth in bits per second of
this upstream interface. It is the sum of all cable modems'
minimum guaranteed bandwidth in bits per second currently
supported on this upstream.
bits/secondInteger32
Constraints:
range: 0-102400000
.1.3.6.1.4.1.9.9.116.1.1.1.1.4
cdxQosCtrlUpMaxVirtualBW
The maximum virtual bandwidth capacity of this upstream interface
if the admission control is enabled. It is the raw bandwidth
in bits per second times the percentage. If the admission
control is disabled, then this o…
bits/secondInteger32
Constraints:
range: 0-102400000
.1.3.6.1.4.1.9.9.116.1.1.1.1.5
.1.3.6.1.4.1.9.9.116.1.1.2 · 1 row entry · 4 columns
This table describes the attributes of rate limiting for 
schedulers in cable upstream and downstream interfaces that 
support Quality of Service.  The rate limiting process is 
to ensure the Quality of Service and fairness.
cdxQosIfRateLimitEntry entry .1.3.6.1.4.1.9.9.116.1.1.2.1
List of the rate limiting attributes for cable upstream and
downstream interfaces schedulers that support Quality of
Service. Entries in this table exist for each ifEntry with
ifType of docsCableUpstream(129) and doc…
Indexes
IF-MIBifIndex
Column Syntax OID
cdxQosIfRateLimitAlgm
To ensure fairness, the CMTS will throttle the rate for bandwidth
request (upstream)/packet sent (downstream) at which CMTS issues
grants(upstream) or allow packet to be send(downstream) such that
the flow never gets…
Enumerationr/w
Enumerated Values:
1noRateLimit
2oneSecBurst
3carLike
4wtExPacketDiscard
5shaping
.1.3.6.1.4.1.9.9.116.1.1.2.1.1
cdxQosIfRateLimitExpWt
Weight for exponential moving average of loss rate for
weighted excess packet discard algorithm to maintain.
The higher value of the weight makes the algorithm
more sensitive to the recent bandwidth usage by the Sid.
Integer32r/w
Constraints:
range: 1-4
.1.3.6.1.4.1.9.9.116.1.1.2.1.2
cdxQosIfRateLimitShpMaxDelay
The maximum shaping delay in milliseconds. That is, the maximum
amount time of buffering the CMTS will allow for any rate exceeded
flow. If the max buffering delay is large, the grants/packets of
the flow will be bu…
Enumerationr/w
Enumerated Values:
1na
2msec128
3msec256
4msec512
5msec1024
.1.3.6.1.4.1.9.9.116.1.1.2.1.3
cdxQosIfRateLimitShpGranularity
The width in milliseconds of each element in shaping
delay queue, that is, the shaping granularity.

The shaping granularity is only applied to rate limit
algorithm: Token bucket algorithm with shaping. I…
Enumerationr/w
Enumerated Values:
1na
2msec1
3msec2
4msec4
5msec8
6msec16
.1.3.6.1.4.1.9.9.116.1.1.2.1.4
.1.3.6.1.4.1.9.9.116.1.1.3 · 1 row entry · 8 columns
The list contains the additional attributes of a single Service
ID that provided by docsIfCmtsServiceEntry.
cdxCmtsServiceExtEntry entry .1.3.6.1.4.1.9.9.116.1.1.3.1
Additional objects for docsIfCmtsServiceTable entry including
downstream traffic statistics and excess counts against the
Quality of Service limits for each Service ID.
From DOCSIS 1.1 onwards statistics are maintaine…
Indexes
No indexes recorded
Column Syntax OID
cdxIfCmtsServiceOutOctets
The cumulative number of Packet Data octets sent for this
Service ID.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.1.3.1.1
cdxIfCmtsServiceOutPackets
The cumulative number of Packet data packets sent for this
Service ID.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.1.3.1.2
cdxQosMaxUpBWExcessRequests
The number of upstream bandwidth requests which exceeds the
maximum upstream bandwidth allowed for a service defined
in the Quality of Service profile associated with this Sid.
The request which exceeds the maximum up…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.1.3.1.3
cdxQosMaxDownBWExcessPackets
The number of downstream bandwidth packets which exceeds the
maximum downstream bandwidth allowed for a service defined
in the Quality of Service profile associated with this Sid.
The packet which exceeds the maximum d…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.1.3.1.4
cdxIfCmtsServiceHCInOctets
The cumulative number of Packet Data octets received on this
Service ID. The count does not include the size of the Cable
MAC header. This object is a 64-bit version of
docsIfCmtsServiceInOctets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.116.1.1.3.1.5
cdxIfCmtsServiceHCInPackets
The cumulative number of Packet Data packets received on this
Service ID. This object is a 64-bit version of
docsIfCmtsServiceInPackets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.116.1.1.3.1.6
cdxIfCmtsServiceHCOutOctets
The cumulative number of Packet Data octets sent for this
Service ID. This object is a 64-bit version of
cdxIfCmtsServiceOutOctets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.116.1.1.3.1.7
cdxIfCmtsServiceHCOutPackets
The cumulative number of Packet Data packets sent for this
Service ID. This object is a 64-bit version of
cdxIfCmtsServiceOutPackets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.9.9.116.1.1.3.1.8
.1.3.6.1.4.1.9.9.116.1.1.4 · 1 row entry · 2 columns
The table contains the attributes of a particular 
Information Element type for each instance of the MAC 
scheduler. It is indexed by upstream ifIndex. An Entry
exists for each ifEntry with ifType of docsCableUpstream(129)
Since each upstream has an instance of a MAC Scheduler so 
this table has the per MAC scheduler slot information on a
per Information Element basis.
cdxUpInfoElemStatsEntry entry .1.3.6.1.4.1.9.9.116.1.1.4.1
The list of statistics for a type of Information Element(IE)
which defines the allowed usage for a range of upstream mini
slots. One entry exists for each Information Element (IE) in
a upstream which ifType is docsCable…
Indexes
IF-MIBifIndex cdxUpInfoElemStatsNameCode
Column Syntax OID
cdxUpInfoElemStatsNameCode
This entry describes the Information Element (IE) type.
Enumerations are :
reqIE(1) : Request Information Element,
The request Information Element provides
an upstream in…
Enumeration
Enumerated Values:
1reqIE
2reqOrDataIE
3initMtnIE
4stnMtnIE
5shortGrantIE
6longGrantIE
.1.3.6.1.4.1.9.9.116.1.1.4.1.1
cdxUpInfoElemStatsIEType
The current number of mini-slots used for the Information
Element type. The value is only a snapshot since the
current number of mini-slots of this IE type could be
changing rapidly.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.9.116.1.1.4.1.2
.1.3.6.1.4.1.9.9.116.1.2.1 · 1 row entry · 7 columns
This table describes the attributes of queues  
in cable interfaces schedulers that support 
Quality of Service.
cdxBWQueueEntry entry .1.3.6.1.4.1.9.9.116.1.2.1.1
The list of queue attributes in cable upstream and downstream
interfaces schedulers that supports Quality of Service.
Entries in this table exist for each ifEntry with ifType of
docsCableUpstream(129) and docsCableDow…
Indexes
IF-MIBifIndex cdxBWQueueNameCode
Column Syntax OID
cdxBWQueueNameCode
The name code for the queue.

cirQ :CIR queue. The queue is for Committed Information Rate
(CIR) type of service which serves Service IDs which
have minimum guaranteed rate in its QoS profile.…
Enumeration
Enumerated Values:
1cirQ
2tbeQ
3p0BEGrantQ
4p1BEGrantQ
5p2BEGrantQ
6p3BEGrantQ
7p4BEGrantQ
8p5BEGrantQ
9p6BEGrantQ
10p7BEGrantQ
11rngPollQ
.1.3.6.1.4.1.9.9.116.1.2.1.1.1
cdxBWQueueOrder
The relative order of this queue to the other queues within the
cable interface. The smaller number has higher order. That is,
0 is the highest order and 10 is the lowest order. The
scheduler will serve the requests …
Integer32
Constraints:
range: 0-10
.1.3.6.1.4.1.9.9.116.1.2.1.1.2
cdxBWQueueNumServedBeforeYield
The maximum number of requests/packets the scheduler can
serve before yielding to another queue. The value 0 means all
requests must be served before yielding to another queue. The
range is 0-50 for DOCSIS 1.0 and fo…
Integer32
Constraints:
range: 0-64
.1.3.6.1.4.1.9.9.116.1.2.1.1.3
cdxBWQueueType
The queuing type which decides the position of a request/packet
within the queue.
unknown : queue type unknown.
other : not fifo, and not priority.
fifo : first in first out.
priority: each bandwidth reque…
Enumeration
Enumerated Values:
1unknown
2other
3fifo
4priority
.1.3.6.1.4.1.9.9.116.1.2.1.1.4
cdxBWQueueMaxDepth
The maximum number of requests/packets which the queue can
support.The range is 0-50 for DOCSIS1.0 and for
DOCSIS1.1 it is 0-64.
Integer32
Constraints:
range: 0-64
.1.3.6.1.4.1.9.9.116.1.2.1.1.5
cdxBWQueueDepth
The current number of requests/packets in the queue.
The range is 0-50 for DOCSIS1.0 and for
DOCSIS1.1 it is 0-64.
Integer32
Constraints:
range: 0-64
.1.3.6.1.4.1.9.9.116.1.2.1.1.6
cdxBWQueueDiscards
The number of requests/packets discarded because of queue
overflow (queue depth > queue maximum depth).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.2.1.1.7
.1.3.6.1.4.1.9.9.116.1.3.1 · 1 row entry · 9 columns
This table contains information about cable modems (CM) or 
Customer Premises Equipments (CPE).
cdxCmCpeEntry entry .1.3.6.1.4.1.9.9.116.1.3.1.1
The list contains information for a cable modem (CM) or a
Customer Premises Equipment (CPE). An entry exist for
each cable modem supported by CMTS and each Customer Premises
Equipment connected to a cable modem suppor…
Indexes
cdxCmCpeMacAddress
Column Syntax OID
cdxCmCpeMacAddress
The Mac address to identify a cable modem or a Customer
Premises Equipment.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.9.9.116.1.3.1.1.1
cdxCmCpeType
Indicate this entry is for cable modem or Customer Premises
Equipment. The enumerations are:
cm(1): cable modem
cpe(2): Customer Premises Equipment
Enumeration
Enumerated Values:
1cm
2cpe
.1.3.6.1.4.1.9.9.116.1.3.1.1.2
cdxCmCpeIpAddress
Ip address of the cable modem or Customer Premises Equipment.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.9.9.116.1.3.1.1.3
cdxCmCpeIfIndex
The CMTS cable MAC interface index (ifType of
docsCableMaclayer(127)) that cable modem or Customer Premises
Equipment connects to.

Use cdxCmCpeIfIndex and cdxCmCpeCmtsServiceId to identify
an entry i…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.9.9.116.1.3.1.1.4
cdxCmCpeCmtsServiceId
The cable modem's primary Service ID if the type is cm.
The primary Service ID for the CM which the CPE connects if the
type is cpe.

Use cdxCmCpeIfIndex and cdxCmCpeCmtsServiceId to identify an
entry i…
Integer32
Constraints:
range: 1-16383
.1.3.6.1.4.1.9.9.116.1.3.1.1.5
cdxCmCpeCmStatusIndex
Pointer to an entry in docsIfCmtsCmStatusTable identifying
status of the CM (which the CPE connects to.)
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.9.9.116.1.3.1.1.6
cdxCmCpeAccessGroup
ASCII text to identify the Access Group for a CM or CPE.
Access Group is to filter the upstream traffic for that
CM or CPE.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.116.1.3.1.1.7
cdxCmCpeResetNow
Setting this object to true(1) causes the device to
reset. Reading this object always returns false(2).

For cdxCmCpeType value cm(1), CMTS removes the
CM from the Station Maintenance List and would ca…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.116.1.3.1.1.8
cdxCmCpeDeleteNow
Setting this object to true(1) causes the CM/CPE to
be deleted. Reading this object always returns false(2).

For cdxCmCpeType value cm(1), CMTS delete CM from
its interface.

For cdxCmCpe…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.116.1.3.1.1.9
.1.3.6.1.4.1.9.9.116.1.3.2 · 1 row entry · 13 columns
The list contains the additional CM status information.
cdxCmtsCmStatusExtEntry entry .1.3.6.1.4.1.9.9.116.1.3.2.1
Additional objects for docsIfCmtsCmStatusTable entry.
Indexes
No indexes recorded
Column Syntax OID
cdxCmtsCmStatusValue
Current Cable Modem connectivity state. The object extends
states in docsIfCmtsCmStatusValue in more details.

The enumerations are:
offline(1) : modem considered offline.
others(2) …
Enumeration
Enumerated Values:
1offline
2others
3initRangingRcvd
4initDhcpReqRcvd
5onlineNetAccessDisabled
6onlineKekAssigned
7onlineTekAssigned
8rejectBadMic
9rejectBadCos
10kekRejected
11tekRejected
12online
13initTftpPacketRcvd
14initTodRequestRcvd
15reset
16rangingInProgress
17rangingCompleted
18dhcpGotIpAddr
19rejStaleConfig
20rejIpSpoof
21rejClassFail
22rejRegNack
23bpiKekExpired
24bpiTekExpired
25shutdown
26channelChgInitRangingRcvd
27channelChgRangingInProgress
.1.3.6.1.4.1.9.9.116.1.3.2.1.1
cdxIfCmtsCmStatusOnlineTimes
The number of times that the modem changes the connectivity
state from 'offline' to 'online' over the time period from
the modem's first ranging message received by CMTS until
now.

The modem is conside…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.3.2.1.2
cdxIfCmtsCmStatusPercentOnline
The percentage of time that the modem stays 'online' over
the time period from the modem's first ranging message
received by CMTS until now.

The value for this object is 100 times bigger than the real …
Integer32
Constraints:
range: 0-10000
.1.3.6.1.4.1.9.9.116.1.3.2.1.3
cdxIfCmtsCmStatusMinOnlineTime
The minimum period of time the modem stayed 'online' over
the time period from the modem's first ranging message
received by CMTS until now.

The modem is considered as 'online' when the value for
cdxCmt…
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.9.9.116.1.3.2.1.4
cdxIfCmtsCmStatusAvgOnlineTime
The average period of time the modem stayed 'online' over
the time period from the modem's first ranging message
received by CMTS until now.

The modem is considered as 'online' when the value for
cdxCmt…
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.9.9.116.1.3.2.1.5
cdxIfCmtsCmStatusMaxOnlineTime
The maximum period of time the modem stayed 'online' over
the time period from the modem's first ranging message
received by CMTS until now.

The modem is considered as 'online' when the value for
cdxCmt…
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.9.9.116.1.3.2.1.6
cdxIfCmtsCmStatusMinOfflineTime
The minimum period of time modem stayed 'offline' over
the time period from the modem's first ranging message
received by CMTS until now.

The modem is considered as 'online' when the value for
cdxCmtsCm…
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.9.9.116.1.3.2.1.7
cdxIfCmtsCmStatusAvgOfflineTime
The average period of time the modem stayed 'offline' over
the time period from the modem's first ranging message
received by CMTS until now.

The modem is considered as 'online' when the value for
cdxCm…
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.9.9.116.1.3.2.1.8
cdxIfCmtsCmStatusMaxOfflineTime
The maximum period of time the modem stayed 'offline' over
the time period from the modem's first ranging message
received by CMTS until now.

The modem is considered as 'online' when the value for
cdxCm…
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.9.9.116.1.3.2.1.9
cdxIfCmtsCmStatusDynSidCount
The number of active dynamic SIDs on this modem.
Prior to getting the assigned the Service Flow IDs(SFID)
the CM must must complete a number of protocol
transactions. The CMTS assigns a temporary Service ID
(SID) to co…
Integer32
Constraints:
range: 0-16383
.1.3.6.1.4.1.9.9.116.1.3.2.1.10
cdxIfCmtsCmStatusAddlInfo
This object indicates additional attributes regarding
the CM.
1. noisyPlant indicates that the CM connection is noisy.
2. modemPowerMaxOut indicates that the modem has reached
its maximum power level.

A b…
Bits
Enumerated Values:
0noisyPlant
1modemPowerMaxOut
.1.3.6.1.4.1.9.9.116.1.3.2.1.11
cdxIfCmtsCmStatusOnlineTimesNum
The number of times that the modem changes the connectivity
state from 'offline' to 'online' over the time period from
the modem's first ranging message received by CMTS until now.

The modem is considered…
CdxResettableCounter32
Textual Convention: CdxResettableCounter32 Unsigned32
.1.3.6.1.4.1.9.9.116.1.3.2.1.12
cdxIfCmtsCmStatusLastResetTime
The last cable modem connectivity statistics reset time. If
the value of this object is '0', then the cable modem
connectivity statistics had not been reset.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
.1.3.6.1.4.1.9.9.116.1.3.2.1.13
.1.3.6.1.4.1.9.9.116.1.3.3 · 1 row entry · 8 columns
This table contains the additions attributes of a CMTS MAC
interface that provided by docsIfCmtsMacTable.
cdxCmtsMacExtEntry entry .1.3.6.1.4.1.9.9.116.1.3.3.1
Additional objects for docsIfCmtsMacTable entry including
the cable modem notification enable/disable and the interval
of cable modem notification sent by the CMTS for a cable modem
that the Mac interface supports. An …
Indexes
No indexes recorded
Column Syntax OID
cdxCmtsCmOnOffTrapEnable
An indication of whether the cdxCmtsCmOnOffNotification
is enabled. The default value is false(2).
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.116.1.3.3.1.1
cdxCmtsCmOnOffTrapInterval
The interval for cdxCmtsCmOnOffNotification sent by CMTS for
one online/offline state change if cdxCmtsCmOnOffTrapEnable
is true.

If there are more than one state changes to online/offline
for a cable …
secondsInteger32r/w
Constraints:
range: 0-86400
.1.3.6.1.4.1.9.9.116.1.3.3.1.2
cdxCmtsCmDefaultMaxCpes
The default maximum number of permitted CPEs per modem
in this cable interface. A modem can override this
value by setting the object cdxCmtsCmMaxCpeNumber
in the cdxCmtsCmTable.

The value -1 means th…
Integer32r/w
Constraints:
range: -1-255
.1.3.6.1.4.1.9.9.116.1.3.3.1.3
cdxCmtsCmTotal
The total count of cable modems on this cable mac interface
since boot.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.9.9.116.1.3.3.1.4
cdxCmtsCmActive
The count of cable modems that are active. Active cable
modems are recognized by the cdxCmtsCmStatusValue
other than offline(1).
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.9.9.116.1.3.3.1.5
cdxCmtsCmRegistered
The count of cable modems that are registered and online
on this cable mac interface. Registered cable modems are
those with one of the following values.
registrationComplete(6) of docsIfCmtsCmStatusValue OR
either …
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.9.9.116.1.3.3.1.6
cdxCmtsCmDMICMode
The Dynamic Shared Secret feature can operate in three
different modes, depending on what action should be taken
for cable modems that fail the CMTS MIC verification check:
notConfigured(1): It indicates that the DMIC…
Enumerationr/w
Enumerated Values:
1notConfigured
2mark
3lock
4reject
.1.3.6.1.4.1.9.9.116.1.3.3.1.7
cdxCmtsCmDMICLockQos
If cdxCmtsCmDMICMode is set to lockingMode(3), this object
would contain the restrictive QoS profile number as
indicated by docsIfQosProfIndex if set and it will
have 0 if not applicable or not defined. In case,
cdxCm…
Integer32r/w
Constraints:
range: 1-16383
.1.3.6.1.4.1.9.9.116.1.3.3.1.8
.1.3.6.1.4.1.9.9.116.1.3.5 · 1 row entry · 8 columns
A table of CMTS operation entries to instruct cable modems
to move to a new downstream and/or upstream channel. 
          
An entry in this table is an operation that has been 
initiated from CMTS to generates downstream frequency and/or 
upstream channel override fields in the RNG-RSP message sent 
to a cable modem.  A RNG-RSP message is sent to a cable 
modem during initial maintenance opportunity. 
          
This operation causes the uBR to place an entry for the cable 
modem specified into the override request queue.  The link is 
then broken by deleting the modem from its polling list.  When 
the modem attempts initial ranging, the override request 
causes downstream frequency and upstream channel override 
fields to be inserted into the RNG-RSP message.
cdxCmtsCmChOverEntry entry .1.3.6.1.4.1.9.9.116.1.3.5.1
A CMTS operation entry to instruct a cable modem to move to
a new downstream and/or upstream channel.

A CMTS operator can use this to initiate an operation
in CMTS to instruct a cable modem to move to a new…
Indexes
cdxCmtsCmChOverSerialNumber
Column Syntax OID
cdxCmtsCmChOverSerialNumber
Object which specifies a unique entry in the
table. A management station wishing to initiate a
channel override operation should use a pseudo-random
value for this object when creating or modifying an
instance of a cd…
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.9.9.116.1.3.5.1.1
cdxCmtsCmChOverMacAddress
The mac address of the cable modem that the CMTS instructs to
move to a new downstream and/or upstream channel.

This column must be set to a valid Mac address currently in
the CMTS in order for this ent…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.9.9.116.1.3.5.1.2
cdxCmtsCmChOverDownFrequency
The new downstream frequency which the cable modem is
instructed to move to. The value 0 is to ask the CMTS not to
override the downstream frequency.
hertzInteger32r/w
Constraints:
range: 0-1000000000
.1.3.6.1.4.1.9.9.116.1.3.5.1.3
cdxCmtsCmChOverUpChannelId
The new channel Id which the cable modem is instructed to
move to. The value -1 is to ask the CMTS not to override
the upstream channel Id.
Integer32r/w
Constraints:
range: -1-255
.1.3.6.1.4.1.9.9.116.1.3.5.1.4
cdxCmtsCmChOverTrapOnCompletion
Specifies whether or not a cdxCmtsCmChOverNotification
should be issued on completion of the operation. If such a
notification is desired, it is the responsibility of the
management entity to ensure that the SNMP ad…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.116.1.3.5.1.5
cdxCmtsCmChOverOpInitiatedTime
The value of sysUpTime at which the operation was initiated.
Since it is possible to have more than one entry in this
table for a cable modem, this object can help to distinguish
the entries for the same cable modem.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
.1.3.6.1.4.1.9.9.116.1.3.5.1.6
cdxCmtsCmChOverState
The status of the specified channel override operation.
The enumerations are:
messageSent(1): the CMTS has sent a RNG-RSP message
with channel override to the cable modem.
commandNotActive(2): the co…
Enumeration
Enumerated Values:
1messageSent
2commandNotActive
3noOpNeeded
4modemNotFound
5waitToSendMessage
6timeOut
.1.3.6.1.4.1.9.9.116.1.3.5.1.7
cdxCmtsCmChOverRowStatus
The status of this table entry.

This value for cdxCmtsCmChOverMacAddress must be valid Mac
address currently in the CMTS in order for the row
status to be set to active successfully.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.9.9.116.1.3.5.1.8
.1.3.6.1.4.1.9.9.116.1.3.6 · 1 row entry · 3 columns
This table contains attributes or configurable parameters 
for cable modems from a CMTS.
cdxCmtsCmEntry entry .1.3.6.1.4.1.9.9.116.1.3.6.1
The list contains a cable modem's attributes or
configurable parameters from a CMTS.
Indexes
DOCS-IF-MIBdocsIfCmtsCmStatusIndex
Column Syntax OID
cdxCmtsCmMaxCpeNumber
The maximum number of permitted CPEs connecting to the
modem.

The value -1 means to use the default value of maximum
hosts per modem in the CMTS cable interface which the modem
connects to and the valu…
Integer32r/w
Constraints:
range: -1-255
.1.3.6.1.4.1.9.9.116.1.3.6.1.1
cdxCmtsCmCurrCpeNumber
The current number of CPEs connecting to the modem.

The value 0 means no hosts connecting to the modem.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.9.9.116.1.3.6.1.2
cdxCmtsCmQosProfile
The index in docsIfQosProfileTable describing the quality
of service attributes associated with this particular
modem's primary SID.

When trying to change the value, if the new value is not
a valid inde…
Integer32r/w
Constraints:
range: 0-16383
.1.3.6.1.4.1.9.9.116.1.3.6.1.3
.1.3.6.1.4.1.9.9.116.1.3.7 · 1 row entry · 2 columns
This table contains the list of modems which failed the CMTS
Dynamic Message Integrity Check (DMIC). The modems are 
either
Marked: The modems failed the DMIC check but were still 
        allowed to come online.
Locked: The modems failed the DMIC check and hence were 
        allowed to come online with a restrictive QoS 
        profile as defined in  cdxCmtsCmDMICLockQos.
Rejected: The modems failed the DMIC check and hence
          were not allowed to come online.
Another objective of the objects in this table is to clear
the lock on the modems.
cdxCmtsCmStatusDMICEntry entry .1.3.6.1.4.1.9.9.116.1.3.7.1
Additional DMIC objects for docsIfCmtsCmStatusTable
entry.
Indexes
DOCS-IF-MIBdocsIfCmtsCmStatusIndex
Column Syntax OID
cdxCmtsCmStatusDMICMode
This shows all the cable modems that are online or offline
and that had failed the Dynamic CMTS MIC verification
check. The state is mentioned as follows:
mark(1): The modem was allowed to come online.
lock(2): The mode…
Enumeration
Enumerated Values:
1mark
2lock
3reject
.1.3.6.1.4.1.9.9.116.1.3.7.1.1
cdxCmtsCmStatusDMICUnLock
When set to TRUE, it forces the cable modems to
reinitialize, and the cable modems must re-register
with a valid DOCSIS configuration file before being
allowed online. Otherwise, the cable modem is locked
in its curre…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.116.1.3.7.1.2
.1.3.6.1.4.1.9.9.116.1.3.8 · 1 row entry · 3 columns
This table contains information about CPE connects behind
cable modem. It will return IP address and IP address type
of each CPE connect to a CM.
          
It is not intended to walk the whole table. An application
would need to query this table based on the specific indices.
Otherwise, it will impact the CMTS performance due to the 
huge size of this table.
          
The agent creates/destroys/modifies an entry whenever there
is a CPE connect to a cable modem or disconnect from a cable
modem.
cdxCmToCpeEntry entry .1.3.6.1.4.1.9.9.116.1.3.8.1
Represents an entry in the table. Each entry is created if
there is CPE connects to a cable modem.

The indices uniquely identify a CPE. It is never the intent
for an application to perform a SNMP Get operat…
Indexes
cdxCmToCpeCmMacAddress cdxCmToCpeInetAddressType cdxCmToCpeInetAddress
Column Syntax OID
cdxCmToCpeCmMacAddress
The MAC address that uniquely identifies a cable modem
that CPEs connects to.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.9.9.116.1.3.8.1.1
cdxCmToCpeInetAddressType
The type of Internet address of the cdxCmToCpeInetAddress.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.116.1.3.8.1.2
cdxCmToCpeInetAddress
This object identifies the address assigned to this CPE.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.116.1.3.8.1.3
.1.3.6.1.4.1.9.9.116.1.3.9 · 1 row entry · 5 columns
This table contains information about cable modems with CPE
connects to.
          
It is not intended to walk the whole table. An application
would need to query this table base on the specific index.
Otherwise, it will impact the CMTS performance due to the
huge size of this table.
          
The agent creates/destroys/modifies an entry whenever there
is update for the cable modem that CPE connects to.
cdxCpeToCmEntry entry .1.3.6.1.4.1.9.9.116.1.3.9.1
An entry in cdxCpeToCmTable. Each entry contains information
on the MAC address, IP Address, and status index for the
cable modem with a specific CPE connects to. Each entry is
created if there is any cable modem with …
Indexes
cdxCpeToCmCpeMacAddress
Column Syntax OID
cdxCpeToCmCpeMacAddress
This object identifies the MAC address of the CPE.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.9.9.116.1.3.9.1.1
cdxCpeToCmMacAddress
This object identifies the MAC address of the cable modem.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.9.9.116.1.3.9.1.2
cdxCpeToCmInetAddressType
The type of Internet address of the cdxCpeToCmInetAddress
object.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.116.1.3.9.1.3
cdxCpeToCmInetAddress
This object identifies the address assigned to this cable
modem.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.116.1.3.9.1.4
cdxCpeToCmStatusIndex
An entry in docsIfCmtsCmStatusTable identifying status
index of the cable modem which the CPE connects to.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.9.9.116.1.3.9.1.5
.1.3.6.1.4.1.9.9.116.1.3.10 · 1 row entry · 6 columns
The table contains a list CPE's IP Prefix management
information.
cdxCpeIpPrefixEntry entry .1.3.6.1.4.1.9.9.116.1.3.10.1
An entry contains information of CM's MAC,
CPE's IP prefix type, CPE's IP prefix address,
CPE's IP prefix length and CPE's MAC address.
An entry is created if CPE is associated with a prefix.
Indexes
cdxCpeIpPrefixCmMacAddress cdxCpeIpPrefixType cdxCpeIpPrefixAddress cdxCpeIpPrefixLen
Column Syntax OID
cdxCpeIpPrefixCmMacAddress
This object indicates the MAC address of the cable modem.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.9.9.116.1.3.10.1.1
cdxCpeIpPrefixType
This object indicates the IP prefix type of the CPE. This is
the type of cdxCpeIpPrefixAddress object.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.116.1.3.10.1.2
cdxCpeIpPrefixAddress
This object indicates the IP prefix address. The type of this
address is determined by the value of
cdxCpeIpPrefixType object.
OctetString
Constraints:
range: 1-96
.1.3.6.1.4.1.9.9.116.1.3.10.1.3
cdxCpeIpPrefixLen
This object indicates the IP prefix length of the CPE. This is
the length of cdxCpeIpPrefixAddress object.
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.9.9.116.1.3.10.1.4
cdxCpeIpPrefixCpeMacAddress
This object indicates the MAC address of CPE.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.9.9.116.1.3.10.1.5
cdxCpeIpPrefixCpeType
This object indicates the type of CPE.
Device Type: B - CM Bridge, R - CM Router
IP Assignment Method: D - DHCP
the format looks like 'R/D'.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.116.1.3.10.1.6
.1.3.6.1.4.1.9.9.116.1.4.1 · 1 row entry · 16 columns
This table contains upstream channel attributes for  
automated Spectrum management, in addition to the ones
provided by docsIfUpstreamChannelEntry.
It also contains upstream channel attributes to count 
the number of active,registered and total number of cable 
modems on this upstream.
cdxIfUpstreamChannelExtEntry entry .1.3.6.1.4.1.9.9.116.1.4.1.1
Additional objects for docsIfUpstreamChannelEntry,including
the secondary upstream channel modulation profile,the
lower bound for the channel width and the number of active,
registered and total number of cable modems…
Indexes
No indexes recorded
Column Syntax OID
cdxIfUpChannelWidth
The lower bound for the bandwidth of this upstream channel.
The bandwidth specified by docsIfUpChannelWidth is used as
the upper bound of the upstream channel. The two objects,
docsIfUpChannelWidth and cdxIfUpChannelWi…
hertzInteger32r/w
Constraints:
range: 0-16000000
.1.3.6.1.4.1.9.9.116.1.4.1.1.1
cdxIfUpChannelModulationProfile
The secondary modulation profile for the upstream channel.
This should be a QPSK modulation profile if the primary profile
is QAM-16. The CMTS will switch from primary profile (QAM16) to
secondary profile (QPSK) depen…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.4.1.1.2
cdxIfUpChannelCmTotal
The total count of cable modems on this upstream channel
since boot.
Integer32
Constraints:
range: 0-8191
.1.3.6.1.4.1.9.9.116.1.4.1.1.3
cdxIfUpChannelCmActive
The count of cable modems that are active.Active cable
modems are recognized by the cdxCmtsCmStatusValue other
than offline(1).
Integer32
Constraints:
range: 0-8191
.1.3.6.1.4.1.9.9.116.1.4.1.1.4
cdxIfUpChannelCmRegistered
The count of cable modems that are registered and online
on this upstream. Registered cable modems are those
with one of the following values:
registrationComplete(6) of docsIfCmtsCmStatusValue OR
online(12), kekRejecte…
Integer32
Constraints:
range: 0-8191
.1.3.6.1.4.1.9.9.116.1.4.1.1.5
cdxIfUpChannelInputPowerLevel
The Upstream Input power level at the CMTS interface.
This is the expected power level and is different from the
actual power received. If not configured the default value
is 0 dBmV and is also the optimum setting power…
Integer32r/w
Constraints:
range: -100-250
.1.3.6.1.4.1.9.9.116.1.4.1.1.6
cdxIfUpChannelAvgUtil
The average percentage of upstream channel utilization.
This item indicates the running average of percent
channel utilization in CMTS upstream Mac scheduler.
percentInteger32
Constraints:
range: 0-100
.1.3.6.1.4.1.9.9.116.1.4.1.1.7
cdxIfUpChannelAvgContSlots
The average percentage of contention mini-slots. This
item indicates the running average of percent
contention mini-slots in CMTS upstream Mac scheduler.
percentInteger32
Constraints:
range: 0-100
.1.3.6.1.4.1.9.9.116.1.4.1.1.8
cdxIfUpChannelRangeSlots
The average percentage of initial ranging mini-slots.
This item indicates the running average of percent
initial ranging mini-slots in CMTS upstream Mac
scheduler.
percentInteger32
Constraints:
range: 0-100
.1.3.6.1.4.1.9.9.116.1.4.1.1.9
cdxIfUpChannelNumActiveUGS
This object indicates the number of active
Unsolicited Grant Service (UGS) on a given upstream.
This would be used for the user to evaluate traffic
load at any given time of the day.

The Unsolicited Gra…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.4.1.1.10
cdxIfUpChannelMaxUGSLastOneHour
This object indicates the maximum number of
Unsolicited Grant Service (UGS) allocated on a
given upstream in the last one hour. This would be
used for the user to evaluate traffic load at any
given time of the day.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.4.1.1.11
cdxIfUpChannelMinUGSLastOneHour
This object indicates the minimum number of
Unsolicited Grant Service (UGS) allocated on a
given upstream in the last one hour. This would be
used for the user to evaluate traffic load at any
given time of the day.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.4.1.1.12
cdxIfUpChannelAvgUGSLastOneHour
This object indicates the average number of
Unsolicited Grant Service (UGS) allocated on a
given upstream in the last one hour. This would be
used for the user to evaluate traffic load at any
given time of the day.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.4.1.1.13
cdxIfUpChannelMaxUGSLastFiveMins
This object indicates the maximum number of
Unsolicited Grant Service (UGS) allocated on a
given upstream in the last five minutes. This would
be used for the user to evaluate traffic load at
any given time of the day…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.4.1.1.14
cdxIfUpChannelMinUGSLastFiveMins
This object indicates the minimum number of
Unsolicited Grant Service (UGS) allocated on a
given upstream in the last five minutes. This would
be used for the user to evaluate traffic load at
any given time of the day…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.4.1.1.15
cdxIfUpChannelAvgUGSLastFiveMins
This object indicates the average number of
Unsolicited Grant Service (UGS) allocated on a
given upstream in the last five minutes. This would
be used for the user to evaluate traffic load at
any given time of the day…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.4.1.1.16
.1.3.6.1.4.1.9.9.116.1.5.13 · 1 row entry · 8 columns
This table contains information regarding the channel list in the CMTS
assigned bonding group a cable modem is assigned to use.
When a modem is operating in partial service this table will contain
additional information about that cable modem indicating which channels
are impaired and contributing to partial service.
cdxWBResilCmEntry entry .1.3.6.1.4.1.9.9.116.1.5.13.1
The list contains information for a cable modem(CM).

Provided the following information for a cable modem:
How many downstream channels in total;
How many upstream channels in total;
How many active downstr…
Indexes
cdxWBResilCmIndex
Column Syntax OID
cdxWBResilCmIndex
This attribute uniquely identifies a CM. The CMTS
must assign a single id value for each CM MAC address seen
by the CMTS. The CMTS should ensure that the association
between an Id and MAC Address remains constant
duri…
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.9.9.116.1.5.13.1.1
cdxWBResilCmMacAddr
This attribute represents the MAC address of the CM.
If the CM has multiple MAC addresses, this is the MAC
address associated with the MAC Domain interface.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.9.9.116.1.5.13.1.2
cdxWBResilCmTotalDsNum
Total downstream channel number of the CM.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.5.13.1.3
cdxWBResilCmTotalUsNum
Total upstream channel number of the CM.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.5.13.1.4
cdxWBResilCmCurrentDsNum
Current active downstream channel number, it's the total
downstream channel minus downstream partial service channel
number.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.5.13.1.5
cdxWBResilCmCurrentUsNum
Current active upstream channel number, it's the total upstream
channel minus upstream partial service channel number.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.5.13.1.6
cdxWBResilCmImpairedDsChIndex
Impaired downstream channel index list.
The index in list is rf channel ifIndex.
If there's no downstream channel impaired, return empty.
The output looks like: '137000 137001 137002'.
This value appears only in a cable…
SNMP-TARGET-MIBSnmpTagList
Textual Convention: SNMP-TARGET-MIBSnmpTagList OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.116.1.5.13.1.7
cdxWBResilCmImpairedUsChIndex
Impaired upstream channel index list.
The index in list is upstream channel ifIndex.
If there's no upstream channel impaired, return empty.
The output looks like: '196408 196409 196410'.
This value appears only in a cab…
SNMP-TARGET-MIBSnmpTagList
Textual Convention: SNMP-TARGET-MIBSnmpTagList OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.116.1.5.13.1.8
.1.3.6.1.4.1.9.9.116.1.6.1 · 1 row entry · 1 columns
This table contains information of the mapping of
the physical RF channels to the primary RF channels.
cdxRFtoPrimaryChannelMappingEntry entry .1.3.6.1.4.1.9.9.116.1.6.1.1
An Entry provides the association between the physical
RF channels and the primary RF Channels.
Indexes
IF-MIBifIndex
Column Syntax OID
cdxPrimaryChannelIfIndex
The ifIndex of the primary channel interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.9.9.116.1.6.1.1.1
.1.3.6.1.4.1.9.9.116.1.6.2 · 1 row entry · 1 columns
This table contains information of the mapping of
the primary RF channels to the physical RF channels.
cdxPrimaryChanneltoRFMappingEntry entry .1.3.6.1.4.1.9.9.116.1.6.2.1
An Entry provides the association between the primary
RF channels and the physical RF Channels.
Indexes
IF-MIBifIndex
Column Syntax OID
cdxPhysicalRFIfIndex
The ifIndex of the physical RF channel interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
.1.3.6.1.4.1.9.9.116.1.6.2.1.1
.1.3.6.1.4.1.9.9.116.1.7.1 · 1 row entry · 8 columns
This table contains CM management information of Transmit
Channel Set(TCS) in the system.
cdxCmtsMtcCmEntry entry .1.3.6.1.4.1.9.9.116.1.7.1.1
An entry provides the CM statistics and management
information of a specific TCS. The interface populated in this
table is of ifType = docsCableMaclayer(127).
Indexes
IF-MIBifIndex cdxCmtsMtcTcsId
Column Syntax OID
cdxCmtsMtcTcsId
This object indicates the Id of the Transmit Channel Set.
DOCS-IF3-MIBChSetId
Textual Convention: DOCS-IF3-MIBChSetId Unsigned32
.1.3.6.1.4.1.9.9.116.1.7.1.1.1
cdxCmtsMtcCmTotal
This object indicates the total number of cable modems
which use this TCS in the MAC domain.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.1.1.2
cdxCMtsMtcCmOperational
This object indicates the number of operational cable
modems which uses this TCS in the MAC domain.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.1.1.3
cdxCmtsMtcCmRegistered
This object indicates the number of registered cable
modems which use this TCS in the MAC domain.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.1.1.4
cdxCmtsMtcCmUnregistered
This object indicates the number of unregistered cable
modem which use this TCS in the MAC domain.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.1.1.5
cdxCmtsMtcCmOffline
This object indicates the number of offline cable modems
which uses this TCS in the MAC domain.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.1.1.6
cdxCmtsMtcCmWideband
This object indicates the number of operational cable
modems which are in wideband state and use this TCS in
the MAC domain.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.1.1.7
cdxCmtsMtcUpstreamBondGrp
This object specifies the upstream channel bonding group.
CdxUpstreamBondGrpList
Textual Convention: CdxUpstreamBondGrpList OctetString
Type Constraints:
range: 0..320
.1.3.6.1.4.1.9.9.116.1.7.1.1.8
.1.3.6.1.4.1.9.9.116.1.7.2 · 1 row entry · 14 columns
This table contains the Upstream Channel Bonding
Service Flow management information.
cdxCmtsUscbSflowEntry entry .1.3.6.1.4.1.9.9.116.1.7.2.1
A entry contains the Service Flow statistics for a specific
Upstream Channel Bonding group. The interface populated in this
table is of ifType = docsCableMaclayer(127).
Indexes
IF-MIBifIndex cdxCmtsUsBondingGrpId
Column Syntax OID
cdxCmtsUsBondingGrpId
This object indicates upstream bonding group
identifier within the MAC Domain.
Unsigned32
Constraints:
range: 1-4294967295
.1.3.6.1.4.1.9.9.116.1.7.2.1.1
cdxCmtsUscbSfTotal
This object indicates the total number of service flows
which use this upstream channel bonding group.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.2.1.2
cdxCmtsUscbSfPri
This object indicates the total number of primary
service flows which use this upstream channel bonding group.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.2.1.3
cdxCmtsUscbStaticSfBe
This object indicates the number of static BE service
flows which use this upstream channel bonding group.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.2.1.4
cdxCmtsUscbStaticSfUgs
This object indicates the number of static UGS service
flows which use this upstream channel bonding group.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.2.1.5
cdxCmtsUscbStaticSfUgsad
This object indicates the number of static UGS-AD service
flows which use this upstream channel bonding group.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.2.1.6
cdxCmtsUscbStaticSfRtps
This object indicates the number of static RTPS service
flows which use this upstream channel bonding group.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.2.1.7
cdxCmtsUscbStaticSfNrtps
This object indicates the number of static NRTPS service
flows which use this upstream channel bonding group.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.2.1.8
cdxCmtsUscbDynSfBe
This object indicates the number of dynamic BE service
flows which use this upstream channel bonding group.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.2.1.9
cdxCmtsUscbDynSfUgs
This object indicates the number of dynamic UGS service
flows which use this upstream channel bonding group.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.2.1.10
cdxCmtsUscbDynSfUgsad
This object indicates the number of dynamic UGS-Ad service
flows which use this upstream channel bonding group.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.2.1.11
cdxCmtsUscbDynSfRtps
This object indicates the number of dynamic RTPS service
flows which use this upstream channel bonding group.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.2.1.12
cdxCmtsUscbDynSfNrtps
This object indicates the number of dynamic NRTPS service
flows which use this upstream channel bonding group.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.116.1.7.2.1.13
cdxCmtsUscbDescr
This object indicates the description of upstream channel
bonding group.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.116.1.7.2.1.14
.1.3.6.1.4.1.9.9.116.1.9.1 · 1 row entry · 15 columns
The cdxRPDGS7KTable contains the attributes of GS7K. 
An Entry exists for each instance. 
It is indexed by GS7K's MacAddress.
cdxRPDGS7KEntry entry .1.3.6.1.4.1.9.9.116.1.9.1.1
The list of statistics for all the sensor,
such as volatage, the state of TriSwitch.
Indexes
cdxRPDGS7KMacAddress
Column Syntax OID
cdxRPDGS7KMacAddress
This is MacAddress of RPDGS7K which is used for index
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.9.9.116.1.9.1.1.1
cdxRPDGS7KPS1p24v
This is the Object of RPDGS7KPS1p24v
0.01VDCInteger32
Constraints:
range: 0-3000
.1.3.6.1.4.1.9.9.116.1.9.1.1.2
cdxRPDGS7KPS1p8v
This is the Object of RPDGS7KPS1p8v
0.01VDCInteger32
Constraints:
range: 0-1000
.1.3.6.1.4.1.9.9.116.1.9.1.1.3
cdxRPDGS7KPS1p5v
This is the Object of RPDGS7KPS1p5v
0.01VDCInteger32
Constraints:
range: 0-625
.1.3.6.1.4.1.9.9.116.1.9.1.1.4
cdxRPDGS7KPS1n6v
This is the Object of RPDGS7KPS1n6v
0.01VDCInteger32
Constraints:
range: 0-800
.1.3.6.1.4.1.9.9.116.1.9.1.1.5
cdxRPDGS7KPS1AC
This is the Object of RPDGS7KPS1AC
0.1VACInteger32
Constraints:
range: 300-2000
.1.3.6.1.4.1.9.9.116.1.9.1.1.6
cdxRPDGS7KPS2p24v
RPDGS7KPS2p24v
0.01VDCInteger32
Constraints:
range: 0-3000
.1.3.6.1.4.1.9.9.116.1.9.1.1.7
cdxRPDGS7KPS2p8v
This is the Object of RPDGS7KPS2p8v
0.01VDCInteger32
Constraints:
range: 0-1000
.1.3.6.1.4.1.9.9.116.1.9.1.1.8
cdxRPDGS7KPS2p5v
This is the Object of RPDGS7KPS2p5v
0.01VDCInteger32
Constraints:
range: 0-625
.1.3.6.1.4.1.9.9.116.1.9.1.1.9
cdxRPDGS7KPS2n6v
This is the Object of RPDGS7KPS2n6v
0.01VDCInteger32
Constraints:
range: 0-800
.1.3.6.1.4.1.9.9.116.1.9.1.1.10
cdxRPDGS7KPS2AC
This is the Object of RPDGS7KPS2AC
0.1VACInteger32
Constraints:
range: 300-2000
.1.3.6.1.4.1.9.9.116.1.9.1.1.11
cdxRPDGS7KTx1OptPower
This is the Object of RPDGS7K Tx4 Opt Power
0.01mWInteger32
Constraints:
range: 0-300
.1.3.6.1.4.1.9.9.116.1.9.1.1.12
cdxRPDGS7KRx1OptPower
This is the Object of RPDGS7K Rx4 Opt Power
0.01mWInteger32
Constraints:
range: 0-300
.1.3.6.1.4.1.9.9.116.1.9.1.1.13
cdxRPDGS7KTriSwitch
This is the Object of RPDGS7K TriSwitch,
The relationship which the number indicates is
low(1) for -6dB
high(2) for 0dB
pad(3) for off
Enumerationr/w
Enumerated Values:
1low
2high
3pad
.1.3.6.1.4.1.9.9.116.1.9.1.1.14
cdxRPDGS7KTamp
This is the Object of RPDGS7K Tamp
Enumeration
Enumerated Values:
1intact
2compromised
.1.3.6.1.4.1.9.9.116.1.9.1.1.15
.1.3.6.1.4.1.9.9.116.1.10.1 · 1 row entry · 2 columns
A list of cable helper entries on Bundle/Sub-Bundle interface.
cdxBundleIpHelperEntry entry .1.3.6.1.4.1.9.9.116.1.10.1.1
The conceptual row of cdxBundleIpHelperEntry.
An instance exists for Cable Bundle/Sub-Bundle Interface.
Indexes
IF-MIBifIndex cdxBundleHelperAddr
Column Syntax OID
cdxBundleHelperAddr
Cable helper IP address
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.116.1.10.1.1.1
cdxBundleHelperType
This object describes which kind of device will be associated
to a cable helper. The entity may support more than one device
class. For example, the entity supports both host and mta.
Therefore, bit 1 and bit 3 are set…
Bits
Enumerated Values:
0dva
2ps
3stb
4mta
5customized
6host
7cm
.1.3.6.1.4.1.9.9.116.1.10.1.1.2
.1.3.6.1.4.1.9.9.116.1.11.1 · 1 row entry · 3 columns
Ipv6 dhcp relay configurations on Bundle/Sub-Bundle interface.
cdxBundleIPv6DHCPRelayEntry entry .1.3.6.1.4.1.9.9.116.1.11.1.1
The conceptual row of cdxBundleIPv6DHCPRelayTable.
An instance exist for the Bundle/Sub-Bundle interface.
Indexes
IF-MIBifIndex
Column Syntax OID
cdxBundleIPv6DHCPRelayInsertVSSOption
Insert VSS option in Relay-Forward Messages
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.116.1.11.1.1.1
cdxBundleIPv6DHCPRelayTrustToRelayReply
Interface is trusted to process relay-replies
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.9.9.116.1.11.1.1.2
cdxBundleIPv6DHDPRelaySourceIfname
Source interface name for IPv6 DHCP relayed messages
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.116.1.11.1.1.3
.1.3.6.1.4.1.9.9.116.1.11.2 · 1 row entry · 5 columns
A list of IPv6 DHCP relay destination entries
on Cable Bundle/Sub-Bundle interfaces.
cdxBundleIPv6DHCPRelayDestEntry entry .1.3.6.1.4.1.9.9.116.1.11.2.1
The conceptual row of cdxBundleIPv6DHCPRelayDestTable.
An instance exists for the Cable Bundle/Sub-Bundle interface.
Indexes
IF-MIBifIndex cdxBundleIPv6DHCPRelayDestOutIfVrfIndex cdxBundleIPv6DHCPRelayDestAddr cdxBundleIPv6DHCPRelayDestOutIfIndex
Column Syntax OID
cdxBundleIPv6DHCPRelayDestOutIfVrfIndex
The vrf identifier that the cdxBundleIPv6DHCPRelayDestOutIfIndex
belongs to, it is assigned to each VRF and is used to
uniquely identify it, if it is zero, means in global vrf.
Unsigned32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.9.116.1.11.2.1.1
cdxBundleIPv6DHCPRelayDestAddr
IPv6 DHCP relay destination address
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.116.1.11.2.1.2
cdxBundleIPv6DHCPRelayDestOutIfIndex
The snmp ifIndex of the IPv6 DHCP relay destination output interface.
If the ifIndex is 0, it means there is no output interface specified
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.9.9.116.1.11.2.1.3
cdxBundleIPv6DHCPRelayDestSourceAddress
IPv6 DHCP relay destination source address
INET-ADDRESS-MIBInetAddressIPv6
Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 OctetString
Type Constraints:
range: 16
.1.3.6.1.4.1.9.9.116.1.11.2.1.4
cdxBundleIPv6DHCPRelayDestLinkAddress
IPv6 DHCP relay destination link address
INET-ADDRESS-MIBInetAddressIPv6
Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 OctetString
Type Constraints:
range: 16
.1.3.6.1.4.1.9.9.116.1.11.2.1.5