CISCO-DMN-DSG-TUNING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
138

activeTunerTable

table
.1.3.6.1.4.1.1429.2.2.5.5.2.1 · 1 row entry · 8 columns
Open in standard view 
Active Tuner Table.
activeTunerEntry entry .1.3.6.1.4.1.1429.2.2.5.5.2.1.1
Entry for Active Tuner Table.
Indexes
activeTunerIndex
Column Syntax OID
activeTunerIndex
Active Tuner Index.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.1
activeTunerRFInput
Active Tuner RF Input.
Enumerationr/w
Enumerated Values:
2rf1
3rf2
4rf3
5rf4
255none
 .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.2
activeTunerFreq
The Satellite Downlink frequency in the range of
0 to 15000000 KHz in steps of 1 KHz.
Integer32r/w
Constraints:
range: 0-15000000
 .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.3
activeTunerSymbolRate
Data rate on the transport stream in millions of symbols per
second.
Range is from 10000 to 450000 hectoSym/second in steps
of 1 hectoSym/second.
( 1 hecto = 10^2 ).
Integer32r/w
Constraints:
range: 10000-450000
 .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.4
activeTunerDVBSFEC
Forward Error Correction Rate.
For DVB-S2 modulation only auto is applicable.
For DVB-S modulation all options are applicable.
Enumerationr/w
Enumerated Values:
1oneHalf
3twoThirds
4threeQuarters
6fiveSixths
7sevenEigths
10auto
 .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.5
activeTunerModulation
Signal Modulation type.
Enumerationr/w
Enumerated Values:
1dvbs
2dvbs2
 .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.6
activeTunerRollOff
Alpha filtering - for DVB-S: 0.20/0.35,
for DVB-S2: 0.20/0.25/0.35. Roll off with scaling factor
of 1/100.
Enumerationr/w
Enumerated Values:
1f35
2f25
3f20
 .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.7
activeTunerIQ
Spectrum Inversion.
Enumerationr/w
Enumerated Values:
1inverted
2nonInverted
3auto
 .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.8

activeInputTable

table
.1.3.6.1.4.1.1429.2.2.5.5.2.2 · 1 row entry · 15 columns
Open in standard view 
Active Input Table.
activeInputEntry entry .1.3.6.1.4.1.1429.2.2.5.5.2.2.1
Entry for Active Input Table.
Indexes
activeInputRFIndex
Column Syntax OID
activeInputRFIndex
Selection of RF Input.
Enumeration
Enumerated Values:
1rf1
2rf2
3rf3
4rf4
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.1
activeInputLNBType
LNB Type: C-Band/Single Ku/Dual Ku/Advanced.
For simplified setup select C-Band or Ku-Band.
If there is a need to configure LO, select Advanced.
Enumerationr/w
Enumerated Values:
1cBand
2singleKuBand
3dualKuBand
4advanced
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.2
activeInputLNBTrim
Low Noise Block Trim Level 1 when type is not advanced.
It has a range of 0 to 15000000 KHz in steps of 1KHz.
Integer32r/w
Constraints:
range: 0-15000000
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.3
activeInputLNBTrim2
Low Noise Block Trim Level 2 when type is not advanced.
It has a range of 0 to 15000000 KHz in steps of 1KHz.
Integer32r/w
Constraints:
range: 0-15000000
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.4
activeInputLocalOscFreq1
RW, only when LNB Type is Advanced.
Local Oscillator #1 Frequency when type is advanced.
It has a range of 0 to 15000000 KHz in steps of 1KHz.
Integer32r/w
Constraints:
range: 0-15000000
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.5
activeInputLocalOscFreq2
RW, only when LNB Type is Advanced.
Local Oscillator #2 Frequency when type is advanced.
It has a range of 0 to 15000000 KHz in steps of 1KHz.
Integer32r/w
Constraints:
range: 0-15000000
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.6
activeInputCrossOver
Crossover Frequency for Local Oscillator.
It has a range of 0 to 15000000 KHz in steps of 1KHz.
Integer32r/w
Constraints:
range: 0-15000000
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.7
activeInputLocalOscControl
22KHz Local Osillator Control.
Enumerationr/w
Enumerated Values:
1off
2on
3auto
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.8
activeInputOrbitalPos
Orbital location Azimuth.The range is from 0 to 3600
in steps of 1.
The scaling factor is 1/10th of a degree.
Integer32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.9
activeInputEastWestFlag
RF Mapping Location East/West Flag.
Enumerationr/w
Enumerated Values:
1east
2west
3notApplicable
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.10
activeInputPolarization
RF Mapping Polarization.
Enumerationr/w
Enumerated Values:
1horizontal
2vertical
3automatic
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.11
activeInputSatName
Satellite Name Matching the Orbital Position + E/W Flag.
Enter Satellite/Transponder Name to fill in Azimuth and
E/W Flag automatically.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.12
activeInputLastLNBConfig
LNB configuration last applied.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.13
activeInputDiSeqCEnable
DiSeqC On/Off.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.14
activeInputDiSeqCSwitch
DiSeqC switch selection.
Enumerationr/w
Enumerated Values:
1off
2a
3b
4c
5d
6e
7f
8g
9h
10i
11j
12k
13l
14m
15n
16o
17p
 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.15

lnbPowerTable

table
.1.3.6.1.4.1.1429.2.2.5.5.2.3 · 1 row entry · 4 columns
Open in standard view 
LNB power Table.
lnbPowerEntry entry .1.3.6.1.4.1.1429.2.2.5.5.2.3.1
Entry for LNB power Table.
Indexes
lnbPowerIndex
Column Syntax OID
lnbPowerIndex
Low Noise Block Power Index.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.1429.2.2.5.5.2.3.1.1
lnbPowerInput
Low Noise Block Power Input.
Enumerationr/w
Enumerated Values:
2rf1
3rf2
4rf3
5rf4
255none
 .1.3.6.1.4.1.1429.2.2.5.5.2.3.1.2
lnbPowerControl
Active LNB Power setting.13/18V is to control dual polarity LNB.
The convention is: Horizontal-18V; Vertical-13V.
Valid settings are,
Off
13V ( 13V always, ignore polarity in NIT )
18V ( 18V always, ig…
Enumerationr/w
Enumerated Values:
1off
2thirteenV
3eighteenH
4hNIT
5vNIT
 .1.3.6.1.4.1.1429.2.2.5.5.2.3.1.3
lnbPowerStatus
Low Noise Block Power Supply Status.
Enumeration
Enumerated Values:
1notApplicable
2normal
3noLoad
4overTemperature
5overLoad
6shortCircuit
7disabled
 .1.3.6.1.4.1.1429.2.2.5.5.2.3.1.4

satSignalTable

table
.1.3.6.1.4.1.1429.2.2.5.5.3.1 · 1 row entry · 38 columns
Open in standard view 
Satellite Signal Table.
satSignalEntry entry .1.3.6.1.4.1.1429.2.2.5.5.3.1.1
Entry for Satellite Signal Table.
Indexes
satSignalIndex
Column Syntax OID
satSignalIndex
Satellite Signal Table Index.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.1
satSignalPvBer
Status: DVB-S Post-Viterbi Bit Error Rate.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.2
satSignalQPSKBer
Status: Quadrature phase-shift keying ( QPSK ) Bit
error rate.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.3
satSignalLdpCber
Status: DVB-S2 Low Density Parity Check Bit Error Rate.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.4
satSignalCndisp
Status: Carrier to Noise Ratio.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.5
satSignalCnMargin
Status: Carrier to Noise Ratio Link Margin.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.6
satSignalLevel
Status: Signal Level.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.7
satSignalSatDishCnMargin
Status: SatDish CN Margin in dB
Displays the margin in dB to a threshold level at
which failure occurs. The range is 0dB to 10dB.
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.8
satSignalSatDishSigLevel
Status: SatDish Signal level( in dBm ) plus some kind of
graphical signal level meter on the LCD
(the range is -75 dBm to +-20 dBm).
OctetString
Constraints:
range: 0-40
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.9
satSignalPerDisp
Status: DVB-S2 Packet Error Rate.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.10
satSignalAfc
Status: Tuner Frequency Offset.
The range is from -51.0 to 51.0 in steps of 0.1 MHz.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.11
satSignalUncorErrCnt
Status: Uncorrected Error Counter. The range is from 0 to
4294967295.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.12
satSignalCorErrCnt
Status: DVB-S Reed-Solomon Corrected Error Counter.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.13
satSignalRfLock
Status: RF Lock Status.
Enumeration
Enumerated Values:
1noLock
2lock
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.14
satSignalDnLkFreq
Status: Downlink Frequency in the range of 0.000000 to
15.000000 GHz in steps of 0.000001 GHz.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.15
satSignalLbandFreq
Status: L-Band Frequency in the range of 950.000 to
2150.000 MHz in steps of 0.001 MHz.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.16
satSignalSymbolRate
Status: Symbol Rate in the Range of 1.0000 to
45.0000 MegaSym/second in steps of 0.0001 MegaSym/second.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.17
satSignalFecRate
Status: Forward Error Correction Rate.
Enumeration
Enumerated Values:
1notApplicable
2half
3threeFifth
4twoThird
5threeQuater
6fourFifth
7fiveSixth
8sevenEight
9eightNinth
10nineTenth
11auto
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.18
satSignalPolarization
Status: Signal Polarization.
Enumeration
Enumerated Values:
1horizontal
2vertical
3leftCircular
4rightCircular
5auto
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.19
satSignalModulation
Status: Signal Modulation Type.
Enumeration
Enumerated Values:
1notApplicable
2qpskDvbs
3qpskDvbs2
4eightPskDvbs2
5sixteenQamDvbs2
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.20
satSignalIQ
Status: Spectrum Inversion.
Enumeration
Enumerated Values:
1inverted
2nonlnverted
3auto
4notApplicable
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.21
satSignalLnbPsStatus
Status: Low Noise Block Power Supply Status.
Enumeration
Enumerated Values:
1notApplicable
2normal
3noLoad
4overTemperature
5overLoad
6shortCircuit
7disabled
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.22
satSignalPilots
Status: Presence of Pilot Symbols.
Enumeration
Enumerated Values:
1no
2yes
3notApplicable
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.23
satSignalLoSelect
Status: LO Select.
Enumeration
Enumerated Values:
1off
2on
3auto
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.24
satSignalPolar
Status: Polarization.
Enumeration
Enumerated Values:
1horizontal
2vertical
3leftCircular
4rightCircular
5auto
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.25
satSignalClearSigErrCnt
Set this variable to yes( 2 ) to clear signal error counter.
Enumerationr/w
Enumerated Values:
1writeOnly
2yes
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.26
satSignalValidateOrbPosDate
Status: Last Orbital Position Validate Date.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.27
satSignalValidateOrbPosStat
Status: Orbital Position Validation Status.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.28
satSignalChScanStatus
Channel Scanning Status :Off/Scanning/Done.
Enumeration
Enumerated Values:
1off
2scanning
3done
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.29
satSignalSigLevelRaw
Signal Level - RAW Register Value.
OctetString
Constraints:
range: 0-5
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.30
satSignalP1DStatus
P1 DSTATUS.
OctetString
Constraints:
range: 0-3
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.31
satSignalDvbS2FrameLen
DVB-S2 Frame Length.
Enumeration
Enumerated Values:
1shortFrame
2longFrame
3notApplicable
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.32
satSignalCnMarginRaw
C/N Margin - RAW Register Value.
OctetString
Constraints:
range: 0-17
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.33
satSignalDvbSQpskErrCount
DVB-S QPSK Error Count.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.34
satSignalDvbS2LdpcErrCount
DVB-S2 LPDC Error Count.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.35
satSignalPvErrCount
DVB-S PV Error Count.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.36
satSignalFecSyncStatus
FEC SYNC Status for DVB-S PV Decoder.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.37
satSignalPktErrCount
DVB-S/DVB-S2 Packet Error Count.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.38

inputStatusTable

table
.1.3.6.1.4.1.1429.2.2.5.5.3.2 · 1 row entry · 24 columns
Open in standard view 
Input Status Table.
inputStatusEntry entry .1.3.6.1.4.1.1429.2.2.5.5.3.2.1
Entry for Input Status Table.
Indexes
inputStatusIndex
Column Syntax OID
inputStatusIndex
Status: Index for inputStatus Table.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.1
inputStatusCurInput
Status: Current Input for D9865 only.
Enumeration
Enumerated Values:
1rf
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.2
inputStatusSatLock
Status: Satellite Lock: No Lock/Lock+Sig/Lock-Sig.
Enumeration
Enumerated Values:
1nolock
2lockminussignal
3lockplussignal
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.3
inputStatusMpgIpLock
Signal Validity.MPEG over IP Lock.
Enumeration
Enumerated Values:
1nolock
2lock
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.4
inputStatusInputRate
Status: Input Rate in Mega bauds per second ( Mbps ).
The range is from 0.000000 to 4294.967295 Mbps in steps of
0.000001 Mbps.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.5
inputStatusNetworkName
Status: Network Name.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.6
inputStatusNetworkId
Status: Network ID.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.7
inputStatusTransportId
Status: Transport ID.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.8
inputStatusScramblingMode
Status: Scrambling mode.
Enumeration
Enumerated Values:
1unknown
2des
3dvb
4biss1
5biss2
6biss3
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.9
inputStatusTransportError
Status: Transport Error.
Enumeration
Enumerated Values:
1notApplicable
2ok
3error
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.10
inputStatusAsiLock
Status: ASI Lock.
Enumeration
Enumerated Values:
1nolock
2lock
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.11
inputStatusAsiLinkError
Status: ASI Link Error.
Enumeration
Enumerated Values:
1notApplicable
2ok
3error
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.12
inputStatusAsiPacketSize
Status: ASI Packet Size.
Enumeration
Enumerated Values:
1notApplicable
2oneHundredAndEightyEight
3twoHundredAndFour
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.13
inputStatusLastTuneReason
Status: Reason for the last tune.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.14
inputStatusCurD985xInput
Status: Current Input for all IRD models.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.15
inputStatusIpiLinkStatus
Status: IPI Ethernet Link Status.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.16
inputStatusIpiSignal
Status: IPI Signal Encapsulation Lock Status.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.17
inputStatusIpiFecLock
Status: FEC Lock Status.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.18
inputStatusIpiPcrLock
Status: Indicates if PCR is received without
errors or not.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.19
inputStatusIpiDelLatency
Status: Dejitter Buffer Latency.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.20
inputStatusIpiData1SrcIP
Status: DATA1 Source IP Selected.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.21
inputStatusIpiData2SrcIP
Status: DATA2 Source IP Selected.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.22
inputStatusIpiData1TsType
Status: DATA1 Source Transport Type.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.23
inputStatusIpiData2TsType
Status: DATA2 Source Transport Type.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.24

siRcvOptionTable

table
.1.3.6.1.4.1.1429.2.2.5.5.4.1 · 1 row entry · 11 columns
Open in standard view 
Rcv Option Table.
siRcvOptionEntry entry .1.3.6.1.4.1.1429.2.2.5.5.4.1.1
Entry for Rcv Option Table.
Indexes
siRcvOptionInstance
Column Syntax OID
siRcvOptionInstance
Instance for siRcvOptionTable.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.1
siRcvOptionAcqMode
Custom Tuning Mode: Acquisition Mode.
Enumerationr/w
Enumerated Values:
1basic
2auto
3custom
 .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.2
siRcvOptionReacq
Set this variable to yes( 2 ) to reacquire signal.
Enumerationr/w
Enumerated Values:
1writeOnly
2yes
 .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.3
siRcvOptionNetID
Network ID.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.4
siRcvOptionInputSel
UserCfg locks to RF input set by the user and SW Map uses
Orbital Position settings to select RF input.
It is recommended to set Validate Orbital Position to 'Yes' for
SW Mapped option.
Enumerationr/w
Enumerated Values:
1userCfg
2swMap
 .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.5
siRcvOptionFreqSel
Custom Tuning Mode: Frequency Tuning Mode: NIT/Preset.
Enumerationr/w
Enumerated Values:
1nit
2userCfg
 .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.6
siRcvOptionServListMode
Custom Tuning Mode: Service List Mode: Rigorous/Degraded.
Enumerationr/w
Enumerated Values:
1rigorous
2degraded
 .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.7
siRcvOptionUseBAT
Custom Tuning Mode:Bouquet Association Table in Service List.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.8
siRcvOptionUseNIT
Custom Tuning Mode:Network Information Table in Service List.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.9
siRcvOptionUseSDT
Custom Tuning Mode:Service Description Table in Service List.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.10
siRcvOptionUsePAT
Custom Tuning Mode:Program Association Table in Service List.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.11

siRcvOptionStatusTable

table
.1.3.6.1.4.1.1429.2.2.5.5.4.2 · 1 row entry · 9 columns
Open in standard view 
Rcv Option Status Table.
siRcvOptionStatusEntry entry .1.3.6.1.4.1.1429.2.2.5.5.4.2.1
Entry for Rcv Option Status Table.
Indexes
siRcvOptionStatusInstance
Column Syntax OID
siRcvOptionStatusInstance
Instance of siRcv Option Status Table.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.1
siRcvOptionLastChanReas
Source of the last tuning.
Enumeration
Enumerated Values:
1nit
2uplinkForceRetune
3userEntry
4preset
 .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.2
siRcvOptionLastActivated
Last Preset Activated number.The range is from 0 to 64.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.3
siRcvOptionStatusFreqSel
Status of Frequency tuning mode.
Enumeration
Enumerated Values:
1nit
2userCfg
 .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.4
siRcvOptionStatusServListMode
Status of Service list mode.
Enumeration
Enumerated Values:
1rigorous
2degraded
 .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.5
siRcvOptionStatusUseBAT
Status of Bouquet Association Table in Service List.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.6
siRcvOptionStatusUseNIT
Status of Network Information Table in Service List.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.7
siRcvOptionStatusUseSDT
Status of Service Description Table in Service List.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.8
siRcvOptionStatusUsePAT
Status of Program Association Table in Service List.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.9

siInfoRxTable

table
.1.3.6.1.4.1.1429.2.2.5.5.4.3 · 1 row entry · 9 columns
Open in standard view 
Service information Receive table.
siInfoRxEntry entry .1.3.6.1.4.1.1429.2.2.5.5.4.3.1
Entry for Service Information Received.
Indexes
siInfoRxInstance siInfoRxIdx
Column Syntax OID
siInfoRxInstance
Instance of SI Info Receive table.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.1
siInfoRxIdx
Service Information Receive Table Index.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.2
siInfoRxType
Service Information Receive Table Type.
Enumeration
Enumerated Values:
1pat
2cat
3pmt
4tsdt
5nit
6nitother
7sdt
8sdtother
9bat
10aeitpf
11oeitpf
12aeitES0
13aeitES1
14oeitES
15tdt
16rst
17st
18tot
19dit
20sit
21ecmodd
22ecmeven
23emm
24mpe
25dpi
26drt
27cdt
28mct
29mat
30mit
31ect
32invalidtableid
 .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.3
siInfoRxIDExt
Service Information Receive Table ID Extension. The range is
from 0 to 4294967295.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.4
siInfoRxUid
Service Information Receive Unique ID. The range is
from 1 to 32.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.5
siInfoRxStatus
Service Information Receive Status.
Enumeration
Enumerated Values:
1none
2partial
3full
4update
5timeout
6lost
 .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.6
siInfoRxVer
Service Information Version. The range is from 0 to
4294967295.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.7
siInfoRxPID
Service Information Program ID. The range is from 0 to 8192.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.8
siInfoRxSections
Service Information Number of Sections. The range is from 0 to
4294967295.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.9

siInfoTsTable

table
.1.3.6.1.4.1.1429.2.2.5.5.4.4 · 1 row entry · 11 columns
Open in standard view 
Transport Stream table.
siInfoTsEntry entry .1.3.6.1.4.1.1429.2.2.5.5.4.4.1
Entry for Transport stream table.
Indexes
siInfoTsInstance siInfoTsIdx
Column Syntax OID
siInfoTsInstance
Transport Stream Table Instance.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.1
siInfoTsIdx
Service Information Transport Stream Index.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.2
siInfoTsId
Frequency Plan: Service Information Transport Stream ID.
The range is from 0 to 4294967295.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.3
siInfoTsFreq
Frequency Plan: Service Information Frequency
The range is from 0.000000 to 15.000000 GHz in steps of
0.000001 GHz.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.4
siInfoTsSymRate
Frequency Plan: Service Information Symbol Rate.
The range is from 1.0000 to 45.0000 Megasym/second in steps
of 0.0001 Megasym.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.5
siInfoTsOrbPosn
Frequency Plan: Service Information Orbital Position.
The range is from 0.0 to 360.0 .
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.6
siInfoTsPolar
Frequency Plan: Service Information Polarization.
Enumeration
Enumerated Values:
1horizontal
2vertical
3leftCircular
4rightCircular
5auto
 .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.7
siInfoTsFEC
Frequency Plan: Service Information Forward Error Correction
Rate.
Enumeration
Enumerated Values:
1notApplicable
2half
3threeFifth
4twoThird
5threeQuarter
6fourFifth
7fiveSixth
8sevenEighth
9eightNinth
10nineTenth
11auto
 .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.8
siInfoTsModulation
Frequency Plan: Service Information Modulation.
Enumeration
Enumerated Values:
1notapplicable
2qpskDvbS
3qpskDvbS2
4eightPskDvbS2
5sixteenQamDvbsS2
 .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.9
siInfoTsOrgNetID
Frequency Plan: Service Information Original Network ID.
The range is from 0 to 4294967295.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.10
siInfoTsEastWestFlag
Frequency Plan: Service Information East West flag.
Enumeration
Enumerated Values:
1east
2west
3notApplicable
 .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.11

siInfoVCInfoTable

table
.1.3.6.1.4.1.1429.2.2.5.5.4.5 · 1 row entry · 9 columns
Open in standard view 
VC table.
siInfoVCInfoEntry entry .1.3.6.1.4.1.1429.2.2.5.5.4.5.1
Entry for VC information.
Indexes
siInfoVCInfoInstance siInfoVCInfoIdx
Column Syntax OID
siInfoVCInfoInstance
Virtual Channel Info table Instance.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.1
siInfoVCInfoIdx
Virtual Channel Info table Index.
Integer32
Constraints:
range: 1-262144
 .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.2
siInfoVCInfoId
Service Information VC Service ID. The range is from 0 to
4294967295.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.3
siInfoVCInfoTxID
Service Information VC Transport Stream ID. The range is from
0 to 4294967295.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.4
siInfoVCInfoProgName
Service Information VC Programme Name.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.5
siInfoVCInfoPMTPID
Service Information VC Program Map Table Program ID.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.6
siInfoVCInfoCHType
Service Type:TV service/ Radio service.
Enumeration
Enumerated Values:
1tv
2radio
3other
 .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.7
siInfoVCInfoECMPID
Service Information VC Entitlement Control Message Program ID.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.8
siInfoVCInfoAuthorized
Service List: Channel Authorized: Yes/No.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.9