satSignalRfLock
CISCO-DMN-DSG-TUNING-MIB ·
.1.3.6.1.4.1.1429.2.2.5.5.3.1.1.14
Object
column
Enumeration
Status: RF Lock Status.
Context
- MIB
- CISCO-DMN-DSG-TUNING-MIB
- OID
.1.3.6.1.4.1.1429.2.2.5.5.3.1.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- satSignalEntry
- Table
- satSignalTable
- Siblings
- 37
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | noLock |
2 | lock |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| satSignalIndex Satellite Signal Table Index. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.1 |
| satSignalPerDisp Status: DVB-S2 Packet Error Rate. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.10 |
| satSignalAfc Status: Tuner Frequency Offset.
The range is from -51.0 to 51.0 in steps of 0.1 MHz. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.11 |
| satSignalUncorErrCnt Status: Uncorrected Error Counter. The range is from 0 to
4294967295. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.12 |
| satSignalCorErrCnt Status: DVB-S Reed-Solomon Corrected Error Counter. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.13 |
| satSignalDnLkFreq Status: Downlink Frequency in the range of 0.000000 to
15.000000 GHz in steps of 0.000001 GHz. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.15 |
| satSignalLbandFreq Status: L-Band Frequency in the range of 950.000 to
2150.000 MHz in steps of 0.001 MHz. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.16 |
| satSignalSymbolRate Status: Symbol Rate in the Range of 1.0000 to
45.0000 MegaSym/second in steps of 0.0001 MegaSym/second. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.17 |
| satSignalFecRate Status: Forward Error Correction Rate. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.18 |
| satSignalPolarization Status: Signal Polarization. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.19 |
| satSignalPvBer Status: DVB-S Post-Viterbi Bit Error Rate. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.2 |
| satSignalModulation Status: Signal Modulation Type. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.20 |
| satSignalIQ Status: Spectrum Inversion. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.21 |
| satSignalLnbPsStatus Status: Low Noise Block Power Supply Status. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.22 |
| satSignalPilots Status: Presence of Pilot Symbols. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.23 |
| satSignalLoSelect Status: LO Select. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.24 |
| satSignalPolar Status: Polarization. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.25 |
| satSignalClearSigErrCnt Set this variable to yes( 2 ) to clear signal error counter. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.26 |
| satSignalValidateOrbPosDate Status: Last Orbital Position Validate Date. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.27 |
| satSignalValidateOrbPosStat Status: Orbital Position Validation Status. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.28 |
| satSignalChScanStatus Channel Scanning Status :Off/Scanning/Done. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.29 |
| satSignalQPSKBer Status: Quadrature phase-shift keying ( QPSK ) Bit
error rate. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.3 |
| satSignalSigLevelRaw Signal Level - RAW Register Value. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.30 |
| satSignalP1DStatus P1 DSTATUS. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.31 |
| satSignalDvbS2FrameLen DVB-S2 Frame Length. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.32 |
| satSignalCnMarginRaw C/N Margin - RAW Register Value. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.33 |
| satSignalDvbSQpskErrCount DVB-S QPSK Error Count. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.34 |
| satSignalDvbS2LdpcErrCount DVB-S2 LPDC Error Count. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.35 |
| satSignalPvErrCount DVB-S PV Error Count. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.36 |
| satSignalFecSyncStatus FEC SYNC Status for DVB-S PV Decoder. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.37 |
| satSignalPktErrCount DVB-S/DVB-S2 Packet Error Count. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.38 |
| satSignalLdpCber Status: DVB-S2 Low Density Parity Check Bit Error Rate. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.4 |
| satSignalCndisp Status: Carrier to Noise Ratio. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.5 |
| satSignalCnMargin Status: Carrier to Noise Ratio Link Margin. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.6 |
| satSignalLevel Status: Signal Level. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.7 |
| satSignalSatDishCnMargin Status: SatDish CN Margin in dB
Displays the margin in dB to a threshold level at
which failure occurs. The range is 0dB to 10dB. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.8 |
| satSignalSatDishSigLevel Status: SatDish Signal level( in dBm ) plus some kind of
graphical signal level meter on the LCD
(the range is -75 dBm to +-20 dBm). | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.9 |