activeInputDiSeqCSwitch
CISCO-DMN-DSG-TUNING-MIB ·
.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.15
Object
column
r/w
Enumeration
DiSeqC switch selection.
Context
- MIB
- CISCO-DMN-DSG-TUNING-MIB
- OID
.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- activeInputEntry
- Table
- activeInputTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | off |
2 | a |
3 | b |
4 | c |
5 | d |
6 | e |
7 | f |
8 | g |
9 | h |
10 | i |
11 | j |
12 | k |
13 | l |
14 | m |
15 | n |
16 | o |
17 | p |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| activeInputRFIndex Selection of RF Input. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.1 |
| activeInputEastWestFlag RF Mapping Location East/West Flag. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.10 |
| activeInputPolarization RF Mapping Polarization. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.11 |
| activeInputSatName Satellite Name Matching the Orbital Position + E/W Flag.
Enter Satellite/Transponder Name to fill in Azimuth and
E/W Flag automatically. | column | OctetString | .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.12 |
| activeInputLastLNBConfig LNB configuration last applied. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.13 |
| activeInputDiSeqCEnable DiSeqC On/Off. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.14 |
| activeInputLNBType LNB Type: C-Band/Single Ku/Dual Ku/Advanced.
For simplified setup select C-Band or Ku-Band.
If there is a need to configure LO, select Advanced. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.2 |
| activeInputLNBTrim Low Noise Block Trim Level 1 when type is not advanced.
It has a range of 0 to 15000000 KHz in steps of 1KHz. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.3 |
| activeInputLNBTrim2 Low Noise Block Trim Level 2 when type is not advanced.
It has a range of 0 to 15000000 KHz in steps of 1KHz. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.4 |
| activeInputLocalOscFreq1 RW, only when LNB Type is Advanced.
Local Oscillator #1 Frequency when type is advanced.
It has a range of 0 to 15000000 KHz in steps of 1KHz. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.5 |
| activeInputLocalOscFreq2 RW, only when LNB Type is Advanced.
Local Oscillator #2 Frequency when type is advanced.
It has a range of 0 to 15000000 KHz in steps of 1KHz. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.6 |
| activeInputCrossOver Crossover Frequency for Local Oscillator.
It has a range of 0 to 15000000 KHz in steps of 1KHz. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.7 |
| activeInputLocalOscControl 22KHz Local Osillator Control. | column | Enumeration | .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.8 |
| activeInputOrbitalPos Orbital location Azimuth.The range is from 0 to 3600
in steps of 1.
The scaling factor is 1/10th of a degree. | column | Integer32 | .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.9 |