activeInputLNBType

CISCO-DMN-DSG-TUNING-MIB · .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.2

MIB view Table view

Object

column r/w Enumeration

LNB Type: C-Band/Single Ku/Dual Ku/Advanced.
For simplified setup select C-Band or Ku-Band.
If there is a need to configure LO, select Advanced.

Context

MIB: CISCO-DMN-DSG-TUNING-MIB
OID: .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.2
Type: column
Access: readwrite
Status: current
Parent: activeInputEntry
Table: activeInputTable
Siblings: 14

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	cBand
`2`	singleKuBand
`3`	dualKuBand
`4`	advanced

Related Objects

Sibling Objects

Object	Type	Syntax	OID
activeInputRFIndex Selection of RF Input.	column	Enumeration	`.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.1`
activeInputEastWestFlag RF Mapping Location East/West Flag.	column	Enumeration	`.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.10`
activeInputPolarization RF Mapping Polarization.	column	Enumeration	`.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.11`
activeInputSatName Satellite Name Matching the Orbital Position + E/W Flag. Enter Satellite/Transponder Name to fill in Azimuth and E/W Flag automatically.	column	OctetString	`.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.12`
activeInputLastLNBConfig LNB configuration last applied.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.13`
activeInputDiSeqCEnable DiSeqC On/Off.	column	Enumeration	`.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.14`
activeInputDiSeqCSwitch DiSeqC switch selection.	column	Enumeration	`.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.15`
activeInputLNBTrim Low Noise Block Trim Level 1 when type is not advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.3`
activeInputLNBTrim2 Low Noise Block Trim Level 2 when type is not advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.4`
activeInputLocalOscFreq1 RW, only when LNB Type is Advanced. Local Oscillator #1 Frequency when type is advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.5`
activeInputLocalOscFreq2 RW, only when LNB Type is Advanced. Local Oscillator #2 Frequency when type is advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.6`
activeInputCrossOver Crossover Frequency for Local Oscillator. It has a range of 0 to 15000000 KHz in steps of 1KHz.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.7`
activeInputLocalOscControl 22KHz Local Osillator Control.	column	Enumeration	`.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.8`
activeInputOrbitalPos Orbital location Azimuth.The range is from 0 to 3600 in steps of 1. The scaling factor is 1/10th of a degree.	column	Integer32	`.1.3.6.1.4.1.1429.2.2.5.5.2.2.1.9`