CISCO-CAS-IF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

ccasDs1IfCfgTable

table

.1.3.6.1.4.1.9.9.85.1.1.1 · 1 row entry · 1 columns

Open in standard view

The CAS/DS0 General Configuration Table for T1/E1.  It
contains the CAS/DS0 related standard configuration 
information for T1/E1.

ccasDs1IfCfgEntry entry .1.3.6.1.4.1.9.9.85.1.1.1.1

An entry in the configuration table for each T1/E1.
The entry is created when a T1/E1 hardware is detected.

Indexes

IF-MIBifIndex

Column	Syntax	OID
ccasDs1IfCfgDs0ChannelsConfigurable This object contains the bit map of the available DS0 channel in the DS1. The MSB (most significant bit) is DS0 channel number 1. The missing bytes is default to a value of 0. A 1-bit indicates the channel is available…	OctetString Constraints: `range: 0-4`	`.1.3.6.1.4.1.9.9.85.1.1.1.1.1`

ccasGrpCfgTable

table

.1.3.6.1.4.1.9.9.85.1.2.1.1 · 1 row entry · 5 columns

Open in standard view

The CAS/DS0 Group Standard Configuration Table.  It
contains the general configuration information for the
CAS/DS0 group of T1/E1 interfaces.

ccasGrpCfgEntry entry .1.3.6.1.4.1.9.9.85.1.2.1.1.1

A CAS/DS0 group entry. Each entry consists of the CAS
group type and the CAS/DS0 group associated DS0
channels in a T1/E1.
The value of ccasGrpCfgDs0Channels must be specified
with at least one available DS0 channel in …

Indexes

IF-MIBifIndex ccasGrpCfgIndex

Column Syntax OID

ccasGrpCfgIndex

An arbitrary index that uniquely identifies a DS0 group
in a T1/E1.

Integer32

Constraints:
range: 0-30

.1.3.6.1.4.1.9.9.85.1.2.1.1.1.1

ccasGrpCfgType

The Signaling type of the DS0 group.
emWinkStart - CAS E&M Wink Start.
emWinkStartFgd - CAS E&M Wink Start with Feature
group D.
emImmedStart - CAS E&M Immediate Start.
emDe…

Enumerationr/w

Enumerated Values:

1	emWinkStart
2	emWinkStartFgd
3	emImmedStart
4	emDelayDial
5	fxsLoopStart
6	fxsGroundStart
7	sasLoopStart
8	sasGroundStart
9	r2Analog
10	r2Digital
11	r2Pulse
12	p7
13	fxoLoopStart
14	fxoGroundStart
15	fgdOS
16	nullSignaling
17	r1Itu
18	r1Modified
19	r1Turkey
20	fgdEANA
21	emMelImmedStart
22	emMelWink
23	emMelDelayDial
24	fxsMelcas
25	fxoMelcas
26	extsig
27	emLmr

.1.3.6.1.4.1.9.9.85.1.2.1.1.1.2

ccasGrpCfgDs0Channels

This object contains the bit map of the selected DS0
channels to be added into this group.
The MSB (most significant bit) is DS0 channel number 1.
For T1, only higher 24 bits are used to specify the
the CAS channels fo…

OctetStringr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.9.9.85.1.2.1.1.1.3

ccasGrpCfgRowStatus

This object is used to create a new row or modify
or delete an existing row in this table. The
corresponding instance of ccasGrpCfgType can not be
modified while this object has the value 'active'.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.85.1.2.1.1.1.4

ccasGrpCfgServiceType

Specify the Service type of the CAS/DS0 group.
none - no service type
casServSw56 - sw56 service for CAS
casServModme - modem service for CAS
casServAuto - auto service for CAS
sgcp - Simple Gateway Control Protoco…

Enumerationr/w

Enumerated Values:

1	none
2	casServSw56
3	casServModem
4	casServAuto
5	sgcp
6	mgcp
7	other
8	trunkingService
9	h248
10	ds0xconn
11	xgcp

.1.3.6.1.4.1.9.9.85.1.2.1.1.1.5

ccasGrpEMCfgTable

table

.1.3.6.1.4.1.9.9.85.1.2.2.1 · 1 row entry · 5 columns

Open in standard view

The CAS Group E&M Standard Configuration Table. It
contains the CAS E&M group standard configuration
information of T1/E1.

ccasGrpEMCfgEntry entry .1.3.6.1.4.1.9.9.85.1.2.2.1.1

An entry in the configuration table for each CAS E&M
Group in the T1/E1.
The entry is created when the ccasGrpCfgType is
configured as 'em' on a T1/E1 via configuration
command.
The entry is deleted when the CAS Group i…

Indexes

IF-MIBifIndex ccasGrpCfgIndex

Column Syntax OID

ccasGrpEMCfgDialType

Specify the addressing type of the CAS group.
dtmf - Dual Tone Multi-Frequency (DTMF) digit.
pulse - dial pulse.
mf - Multi-Frequency (MF) digit.
The default value of this object is dtmf(1).

Enumerationr/w

Enumerated Values:

1	dtmf
2	pulse
3	mf

.1.3.6.1.4.1.9.9.85.1.2.2.1.1.1

ccasGrpEMCfgDnisAni

Specify the type of Destination Number Identification
Service (DNIS) and Automatic Number Identification
(ANI) support.
MF tone supports both ANI and DNIS services. The DTMF
tone only supports both incoming and outgoing…

Bitsr/w

Enumerated Values:

0	incomingDnis
1	incomingAni
2	outgoingDnis
3	outgoingAni

.1.3.6.1.4.1.9.9.85.1.2.2.1.1.2

ccasGrpEMCfgLmrMCap

The M lead behavior of E&M LMR interface.
inact - The m-lead status should be ignored.
audio - The m-lead status is used to control
generating voice packet.
dial - The first m-lead off to on status indicates
…

Enumerationr/w

Enumerated Values:

1	inact
2	audio
3	dial

.1.3.6.1.4.1.9.9.85.1.2.2.1.1.3

ccasGrpEMCfgLmrECap

The E lead behavior of E&M LMR interface.
seize - The e-lead used as seize signal.
voice - The e-lead status is used to indicate
voice packet received or not.
inactive -- e-lead is inactive.

Enumerationr/w

Enumerated Values:

4	seize
5	voice
6	inactive

.1.3.6.1.4.1.9.9.85.1.2.2.1.1.4

ccasGrpEMCfgAutoGainControl

This object is used to enabling or disabling automatic
gain control on this interface. AGC allows dsp to
adjust the input voice volume and avoid rapid
voice volume change.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.85.1.2.2.1.1.5

ccasGrpEMTmTable

table

.1.3.6.1.4.1.9.9.85.1.2.2.2 · 1 row entry · 15 columns

Open in standard view

The E&M interface Timing Parameters table. It 
contains the configuration of the various E&M signaling
protocol timing parameters.

ccasGrpEMTmEntry entry .1.3.6.1.4.1.9.9.85.1.2.2.2.1

An entry in the E&M Timing Parameters Table for
each E&M interface.

Indexes

No indexes recorded

Column	Syntax	OID
ccasGrpEMTmClearWaitDuration Time of Inactive incoming seizure signal to declare call cleared. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emWinkStart(1) or emWinkStartFgd(2). The default value of this…	millisecondsInteger32r/w Constraints: `range: 200-2000`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.1`
ccasGrpEMTmMaxWinkWaitDuration Maximum wink wait duration for sending out wink start signaling. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emWinkStart(1) or emWinkStartFgd(2). The default value of this…	millisecondsInteger32r/w Constraints: `range: 100-5000`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.2`
ccasGrpEMTmMaxWinkDuration Maximum wink duration for sending out wink start signaling. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emWinkStart(1) or emWinkStartFgd(2). The default value of this obje…	millisecondsInteger32r/w Constraints: `range: 100-3000`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.3`
ccasGrpEMTmDelayStart Timing of generation of outgoing delayed start signal from detection of incoming seizure. This object is relevant to the interfaces of the CAS group if the ccasGrpCfgType object is emDelayDial(4). The default value of …	millisecondsInteger32r/w Constraints: `range: 20-2000`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.4`
ccasGrpEMTmMaxDelayDuration Maximum delay signal duration for sending out delay dial signaling. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emDelayDial(4). The default value of this object is 2000 mi…	millisecondsInteger32r/w Constraints: `range: 100-5000`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.5`
ccasGrpEMTmMinDelayPulseWidth Minimum delay-dial pulse duration for incoming call. If the value of this object is 0, then no delay-dial is sent to the far end for the incoming call. This object is relevant to the interfaces in the CAS group if the c…	millisecondsInteger32r/w Constraints: `range: 0-0` `range: 140-5000`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.6`
ccasGrpEMTmDigitDuration Outgoing DTMF/MF digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpCfgDialType is dtmf or R2 tone. The default value of this object is 100 …	millisecondsInteger32r/w Constraints: `range: 50-500`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.7`
ccasGrpEMTmInterDigitDuration Outgoing DTMF/MF inter-digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpCfgDialType is dtmf or R2 tone. The default value of this object i…	millisecondsInteger32r/w Constraints: `range: 50-500`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.8`
ccasGrpEMTmPulseRate Outgoing Pulse dialing rate in pulses per second (pps). This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpCfgDialType is pulse. The default value of this object is 10 pps.	pulses per secondInteger32r/w Constraints: `range: 10-20`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.9`
ccasGrpEMTmPulseInterDigitDuration Outgoing Pulse dialing inter-digit timing in milliseconds. This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpCfgDialType is pulse. The default value of this object is 500…	millisecondsInteger32r/w Constraints: `range: 100-1000`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.10`
ccasGrpEMTmVoiceHangover The hangover time used to determine there is no more voice packet arrived. The default value of this object is 250 milliseconds.	millisecondsInteger32r/w Constraints: `range: 0-10000`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.11`
ccasGrpEMTmLmrTeardown LMR port tear down timeout. This object is relevant to the waiting time of teardown call on LMR port. If the value of this object is '-1', then the timeout is disable.	secondsInteger32r/w Constraints: `range: -1--1` `range: 5-60000`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.12`
ccasGrpEMTmPttXmt This object signifies LMR port maximum transmit time. This object is relevant to how long LMR port can continue transmit voice packet without pause.	minutesInteger32r/w Constraints: `range: 0-30`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.13`
ccasGrpEMTmPttRcv This object signifies LMR port maximum receive time. This object is relevant to how long LMR port can continue receive voice packet without pause.	minutesInteger32r/w Constraints: `range: 0-30`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.14`
ccasGrpEMTmDelayVoice This object is relevant to how long LMR will delay sending the voice packet to the LMR port.	millisecondsInteger32 Constraints: `range: 0-1500`	`.1.3.6.1.4.1.9.9.85.1.2.2.2.1.15`

ccasGrpLineCfgTable

table

.1.3.6.1.4.1.9.9.85.1.2.3.1 · 1 row entry · 3 columns

Open in standard view

The CAS Group FXS/SAS Standard Configuration Table.  It
contains the CAS FXS/SAS group standard configuration
information of T1/E1.

ccasGrpLineCfgEntry entry .1.3.6.1.4.1.9.9.85.1.2.3.1.1

An entry in the configuration table for each CAS
FXS/SAS Group in the T1/E1.
The entry is created when the ccasGrpCfgType is
configured as 'fxs' or 'sas' on a T1/E1 via
configuration command. The entry is deleted when t…

Indexes

IF-MIBifIndex ccasGrpCfgIndex

Column Syntax OID

ccasGrpLineCfgNumberRings

The number of rings detected before closing loop.
If the value of this object is 0, then the managed
system answers immediately after the interface detects
a incoming seizure if the ccasGrpCfgType is
'fxsGroundStart' or…

ringsInteger32r/w

Constraints:
range: 0-10

.1.3.6.1.4.1.9.9.85.1.2.3.1.1.1

ccasGrpLineCfgSupDisconnect

Specifies whether a supervisory disconnect signal will
be presented to the interface when the connected party
at the interface hangs up. this object is only relevant
to the ccasGrpCfgType is fxsLoopStart or sasLoopStar…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.85.1.2.3.1.1.2

ccasGrpLineCfgDialType

Specify the addressing type of the CAS group.
dtmf - Dual Tone Multi-Frequency (DTMF) digit.
pulse - dial pulse.
The default value of this object is dtmf(1).

Enumerationr/w

Enumerated Values:

1	dtmf
2	pulse

.1.3.6.1.4.1.9.9.85.1.2.3.1.1.3

ccasGrpLineTmTable

table

.1.3.6.1.4.1.9.9.85.1.2.3.2 · 1 row entry · 4 columns

Open in standard view

The FXS/SAS interface Timing Parameters table. It
contains the configuration of the various FXS/SAS
signaling protocol timing parameters.

ccasGrpLineTmEntry entry .1.3.6.1.4.1.9.9.85.1.2.3.2.1

An entry in the FXS/SAS Timing Parameters Table for
each FXS/SAS interface.

Indexes

No indexes recorded

Column	Syntax	OID
ccasGrpLineTmDigitDuration Outgoing DTMF digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpLineCfgDialType is dtmf. The default value of this object is 100 millisecon…	millisecondsInteger32r/w Constraints: `range: 50-500`	`.1.3.6.1.4.1.9.9.85.1.2.3.2.1.1`
ccasGrpLineTmInterDigitDuration Outgoing DTMF inter-digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpLineCfgDialType is dtmf. The default value of this object is 100 mill…	millisecondsInteger32r/w Constraints: `range: 50-500`	`.1.3.6.1.4.1.9.9.85.1.2.3.2.1.2`
ccasGrpLineTmPulseRate Outgoing Pulse dialing rate in pulses per second (pps). This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaCfgDialType is pulse. The default value of this object is 10 …	pulses per secondInteger32r/w Constraints: `range: 10-20`	`.1.3.6.1.4.1.9.9.85.1.2.3.2.1.3`
ccasGrpLineTmPulseInterDigitDuration Outgoing Pulse dialing inter-digit timing in milliseconds. This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaCfgDialType is pulse. The default value of this object is …	millisecondsInteger32r/w Constraints: `range: 100-1000`	`.1.3.6.1.4.1.9.9.85.1.2.3.2.1.4`

ccasGrpStaCfgTable

table

.1.3.6.1.4.1.9.9.85.1.2.4.1 · 1 row entry · 2 columns

Open in standard view

The FXO/SAO standard configuration table. It contains
FXO/SAO configuration parameters, one entry per FXO/SAO
interface.
The configuration information of this table is set by 
its default setting when the CAS group is created by 
the configuration commands.

ccasGrpStaCfgEntry entry .1.3.6.1.4.1.9.9.85.1.2.4.1.1

An entry in the standard configuration table for
each FXO/SAO Group.
The entry is created when the ccasGrpCfgType is
configured as 'fxo' or 'sao' on a T1/E1 via
configuration command. The entry is deleted when the
CAS G…

Indexes

IF-MIBifIndex ccasGrpCfgIndex

Column Syntax OID

ccasGrpStaCfgNumberRings

The number of rings sent before sending reorder to the
originator and releasing resources.
If the value of this object is 0, then sending
reorder to the originator is disabled.
The default value of this object is 20 ri…

ringsInteger32r/w

Constraints:
range: 0-1000

.1.3.6.1.4.1.9.9.85.1.2.4.1.1.1

ccasGrpStaCfgDialType

Specify the addressing type of the CAS group.
dtmf - Dual Tone Multi-Frequency (DTMF) digit.
pulse - dial pulse.
The default value of this object is dtmf(1).

Enumerationr/w

Enumerated Values:

1	dtmf
2	pulse

.1.3.6.1.4.1.9.9.85.1.2.4.1.1.2

ccasGrpStaTmTable

table

.1.3.6.1.4.1.9.9.85.1.2.4.2 · 1 row entry · 4 columns

Open in standard view

The FXO/SAO interface Timing Parameters table. It 
contains the configuration of the various FXO/SAO
signaling protocol timing parameters.

ccasGrpStaTmEntry entry .1.3.6.1.4.1.9.9.85.1.2.4.2.1

An entry in the FXO/SAO Timing Parameters Table for
each FXO/SAO interface.

Indexes

No indexes recorded

Column	Syntax	OID
ccasGrpStaTmDigitDuration Outgoing DTMF digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpStaCfgDialType is dtmf. The default value of this object is 100 millisecond…	millisecondsInteger32r/w Constraints: `range: 50-500`	`.1.3.6.1.4.1.9.9.85.1.2.4.2.1.1`
ccasGrpStaTmInterDigitDuration Outgoing DTMF inter-digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpStaCfgDialType is dtmf. The default value of this object is 100 milli…	millisecondsInteger32r/w Constraints: `range: 50-500`	`.1.3.6.1.4.1.9.9.85.1.2.4.2.1.2`
ccasGrpStaTmPulseRate Outgoing Pulse dialing rate in pulses per second (pps). This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaCfgDialType is pulse. The default value of this object is 10 …	pulses per secondInteger32r/w Constraints: `range: 10-20`	`.1.3.6.1.4.1.9.9.85.1.2.4.2.1.3`
ccasGrpStaTmPulseInterDigitDuration Outgoing Pulse dialing inter-digit timing in milliseconds. This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaCfgDialType is pulse. The default value of this object is …	millisecondsInteger32r/w Constraints: `range: 100-1000`	`.1.3.6.1.4.1.9.9.85.1.2.4.2.1.4`

ccasGrpABCDCfgTable

table

.1.3.6.1.4.1.9.9.85.1.2.5.1 · 1 row entry · 2 columns

Open in standard view

The CAS group custom ABCD bits configuration table for
E1. It contains A/B/C/D bits handling objects, one
entry per CAS group on an E1 interface.

ccasGrpABCDCfgEntry entry .1.3.6.1.4.1.9.9.85.1.2.5.1.1

An entry in the custom ABCD configuration table for
each CAS Group on an E1 interface.
The entry is created when a CAS group is configured
on a E1. The entry is deleted when the CAS Group is
de-configured from E1.

Indexes

IF-MIBifIndex ccasGrpCfgIndex

Column Syntax OID

ccasGrpABCDCfgInvertBits

Specify the A/B/C/D bit mask to invert the A/B/C/D bits
value before the A/B/C/D bits are sent or
after the A/B/C/D bits are received.
1-bit - enable bit inversion.
0-bit - disable bit inversion.
The default value of…

Bitsr/w

Enumerated Values:

0	dBit
1	cBit
2	bBit
3	aBit

.1.3.6.1.4.1.9.9.85.1.2.5.1.1.1

ccasGrpABCDCfgUnusedBits

Specify the Unused A/B/C/D bit values to transmit.
If any A/B/C/D bit is unused, the bit values in this
object will be used to transmit for the unused
A/B/C/D bits.
The default value of this object is '00'H

Bitsr/w

Enumerated Values:

0	dBit
1	cBit
2	bBit
3	aBit

.1.3.6.1.4.1.9.9.85.1.2.5.1.1.2

ccasChannelCfgTable

table

.1.3.6.1.4.1.9.9.85.1.3.1 · 1 row entry · 4 columns

Open in standard view

The CAS channel Standard Configuration Table.  It
contains the standard configuration information of CAS
channel of T1/E1.

ccasChannelCfgEntry entry .1.3.6.1.4.1.9.9.85.1.3.1.1

An entry in the configuration table for each CAS
channel. The entry is created when a CAS channel is
configured on a T1/E1 via configuration command. The
entry is deleted when the CAS channel is de-configured
from T1/E1.

Indexes

IF-MIBifIndex

Column Syntax OID

ccasChannelCfgDS1IfIndex

the ifIndex of this CAS channel associated T1/E1.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.9.9.85.1.3.1.1.1

ccasChannelCfgGroup

The CAS channel associated CAS group number.

Integer32

Constraints:
range: 0-30

.1.3.6.1.4.1.9.9.85.1.3.1.1.2

ccasChannelCfgTimeSlot

The CAS channel associated T1/E1 timeslot.

Integer32

Constraints:
range: 1-31

.1.3.6.1.4.1.9.9.85.1.3.1.1.3

ccasChannelCfgBusyOut

The CAS channel busyout configuration.
true - the CAS channel is busied out.
false - the CAS is normal.
The default value for this object is 'false'.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.85.1.3.1.1.4

ccasChannelStatusTable

table

.1.3.6.1.4.1.9.9.85.1.3.2 · 1 row entry · 4 columns

Open in standard view

The CAS channel Status Table.  It contains general 
information about the status of CAS channel.

ccasChannelStatusEntry entry .1.3.6.1.4.1.9.9.85.1.3.2.1

An entry in the status table for each CAS channel.

Indexes

No indexes recorded

Column Syntax OID

ccasChannelStatusRecvSignalBits

The receive ABCD signaling bits for the CAS channel.
aBit - the signaling bit in the 6th frame
bBit - the signaling bit in the 12th frame
cBit - the signaling bit in the 18th frame
dBit - the signaling bit in the 24…

Bits

Enumerated Values:

0	dBit
1	cBit
2	bBit
3	aBit

.1.3.6.1.4.1.9.9.85.1.3.2.1.1

ccasChannelStatusBusyOut

The CAS channel busyout state.
true - the CAS channel is busied out.
false - the CAS is normal.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.85.1.3.2.1.2

ccasChannelStatusInfoType

The Information Transfer Capability for the current
or last call.

unknown - If since system startup there has been no call
on this interface, this object has a value of
unknown(1).
…

Enumeration

Enumerated Values:

1	unknown
2	speech
3	data56
4	audio31
5	audio7
6	video
7	fax
8	modem

.1.3.6.1.4.1.9.9.85.1.3.2.1.3

ccasChannelStatusXmitSignalBits

The transmit ABCD signaling bits for the CAS channel.
aBit - the signaling bit in the 6th frame
bBit - the signaling bit in the 12th frame
cBit - the signaling bit in the 18th frame
dBit - the signaling bit in the 2…

Bits

Enumerated Values:

0	dBit
1	cBit
2	bBit
3	aBit

.1.3.6.1.4.1.9.9.85.1.3.2.1.4

ccasVoiceCfgTable

table

.1.3.6.1.4.1.9.9.85.1.4.1 · 1 row entry · 12 columns

Open in standard view

The voice specific configuration Table. It contains
information about the voice related configuration
parameters for a CAS group.

ccasVoiceCfgEntry entry .1.3.6.1.4.1.9.9.85.1.4.1.1

An entry in the voice specific configuration table for each
CAS/DS0 group of a DS1.
The entry is created if the associated CAS/DS0 group is
created and the voice hardware is detected to support the
voice capability for…

Indexes

IF-MIBifIndex ccasGrpCfgIndex

Column Syntax OID

ccasVoiceCfgNoiseRegEnable

The object indicates whether or not the background noise
should be played to fill silence gaps if VAD is activated.
The default value of this object is 'true'.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.85.1.4.1.1.1

ccasVoiceCfgNonLinearProcEnable

The object indicates whether or not the Nonlinear Processing
is enabled for the interface.
The default value of this object is 'true'.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.85.1.4.1.1.2

ccasVoiceCfgMusicOnHoldThreshold

The object specifies the Music On Hold Threshold for
the interface.
The default value of this object is -38 dBm.

dBmInteger32r/w

Constraints:
range: -70--30

.1.3.6.1.4.1.9.9.85.1.4.1.1.3

ccasVoiceCfgInGain

This object contains the amount of gain inserted at the
receiver side of the interface. The input gain settings
only define a gain/loss relative to the 0 dB setting.
The absolute loss at the 0 dB setting could be
implem…

dBInteger32r/w

Constraints:
range: -6-14

.1.3.6.1.4.1.9.9.85.1.4.1.1.4

ccasVoiceCfgOutAttn

This object contains the amount of attenuation inserted
at the transmit side of the interface.
The output attenuation settings only define a loss
relative to the 0 dB setting.
The absolute loss at the 0 dB setting cou…

dBInteger32r/w

Constraints:
range: 0-14

.1.3.6.1.4.1.9.9.85.1.4.1.1.5

ccasVoiceCfgEchoCancelEnable

The object specifies whether or not the Echo Cancellation
is enabled for the interface.
The default value of this object is 'true'.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.85.1.4.1.1.6

ccasVoiceCfgEchoCancelCoverage

The object specifies the Echo Canceller coverage for
the interface. This object is valid if the
ccasVoiceCfgEchoCancelEnable object is 'true'.
echoCanceller8ms - 8 milliseconds echo canceller coverage.
echoCanceller16…

Enumerationr/w

Enumerated Values:

1	echoCanceller8ms
2	echoCanceller16ms
3	echoCanceller24ms
4	echoCanceller32ms
5	echoCanceller64ms
6	echoCanceller128ms

.1.3.6.1.4.1.9.9.85.1.4.1.1.7

ccasVoiceCfgConnectionMode

The object indicates the connection mode of the interface.
normal - the interface acts normally to handle incoming
and outgoing call.
trunk - the interface acts in trunking mode. trunking mode
causes …

Enumerationr/w

Enumerated Values:

1	normal
2	trunk
3	plar

.1.3.6.1.4.1.9.9.85.1.4.1.1.8

ccasVoiceCfgConnectionNumber

This is the E.164 phone number that is used to
establish connection with trunking mode or PLAR mode.
If the ccasVoiceCfgConnectionMode is 'normal', then this
object will be a zero length string.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.9.9.85.1.4.1.1.9

ccasVoiceCfgInitialDigitTimeOut

This is the initial digit timeout that indicates the amount
of time the managed system waits for an initial input digit
from the caller. The timer is activated when the call is
accepted and is deactivated upon digit inp…

secondsInteger32r/w

Constraints:
range: 0-120

.1.3.6.1.4.1.9.9.85.1.4.1.1.10

ccasVoiceCfgInterDigitTimeOut

This is the inter-digit timeout that indicates the amount
of time the managed system waits for a subsequent input
digit from the caller. The timer is started upon receipt of
an input digit and restarted as each digit is…

secondsInteger32r/w

Constraints:
range: 0-120

.1.3.6.1.4.1.9.9.85.1.4.1.1.11

ccasVoiceCfgRegionalTone

This object contains the current regional setting for
the call progress tone to be used by this CAS group.

CISCO-TCCountryCoder/w

Textual Convention: CISCO-TCCountryCode OctetString

Type Constraints:
range: 0
range: 2

.1.3.6.1.4.1.9.9.85.1.4.1.1.12

ccasXgcpCfgTable

table

.1.3.6.1.4.1.9.9.85.1.5.1 · 1 row entry · 2 columns

Open in standard view

The XGCP configuration Table contains
information about DS0 usage by XGCP(SGCP/MGCP).  
          
XGCP is meant to represent both Simple Gateway Control
Protocol (SGCP) and Media Gateway Control Protocol (MGCP).

ccasXgcpCfgEntry entry .1.3.6.1.4.1.9.9.85.1.5.1.1

An entry in the configuration table for each
DS0 group of a DS1.

The entry is created if the DS0 group is configured as
null-signaling and ccasGrpCfgServiceType is configured
as either sgcp or mgcp.
…

Indexes

IF-MIBifIndex ccasGrpCfgIndex

Column	Syntax	OID
ccasXgcpCfgCotToneCo1 This object specifies the continuity test tone frequencies for co1. Co1 is the COT tone frequency from the terminating switch in transponder mode and is from the originating switch in loopback mode.	hertzInteger32r/w Constraints: `range: 280-3800`	`.1.3.6.1.4.1.9.9.85.1.5.1.1.1`
ccasXgcpCfgCotToneCo2 This object specifies the continuity test tone frequencies for co2. Co2 is the COT tone frequency from the originating switch only in transponder mode.	hertzInteger32r/w Constraints: `range: 280-3800`	`.1.3.6.1.4.1.9.9.85.1.5.1.1.2`