ccasVoiceCfgOutAttn
CISCO-CAS-IF-MIB ·
.1.3.6.1.4.1.9.9.85.1.4.1.1.5
Object
column
r/w
dB Integer32
This object contains the amount of attenuation inserted at the transmit side of the interface. The output attenuation settings only define a loss relative to the 0 dB setting. The absolute loss at the 0 dB setting could be implementation dependent based on the desired network loss plan. The default value of this object is 0 dB (decibel).
Context
- MIB
- CISCO-CAS-IF-MIB
- OID
.1.3.6.1.4.1.9.9.85.1.4.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- dB
- Parent
- ccasVoiceCfgEntry
- Table
- ccasVoiceCfgTable
- Siblings
- 11
Syntax
dB Integer32
Values & Constraints
Object Constraints
range: 0-14
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ccasVoiceCfgNoiseRegEnable The object indicates whether or not the background noise
should be played to fill silence gaps if VAD is activated.
The default value of this object is 'true'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.85.1.4.1.1.1 |
| ccasVoiceCfgInitialDigitTimeOut This is the initial digit timeout that indicates the amount
of time the managed system waits for an initial input digit
from the caller. The timer is activated when the call is
ac… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.85.1.4.1.1.10 |
| ccasVoiceCfgInterDigitTimeOut This is the inter-digit timeout that indicates the amount
of time the managed system waits for a subsequent input
digit from the caller. The timer is started upon receipt of
an in… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.85.1.4.1.1.11 |
| ccasVoiceCfgRegionalTone This object contains the current regional setting for
the call progress tone to be used by this CAS group. | column | CISCO-TCCountryCode | .1.3.6.1.4.1.9.9.85.1.4.1.1.12 |
| ccasVoiceCfgNonLinearProcEnable The object indicates whether or not the Nonlinear Processing
is enabled for the interface.
The default value of this object is 'true'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.85.1.4.1.1.2 |
| ccasVoiceCfgMusicOnHoldThreshold The object specifies the Music On Hold Threshold for
the interface.
The default value of this object is -38 dBm. | column | dBm Integer32 | .1.3.6.1.4.1.9.9.85.1.4.1.1.3 |
| ccasVoiceCfgInGain This object contains the amount of gain inserted at the
receiver side of the interface. The input gain settings
only define a gain/loss relative to the 0 dB setting.
The absolute … | column | dB Integer32 | .1.3.6.1.4.1.9.9.85.1.4.1.1.4 |
| ccasVoiceCfgEchoCancelEnable The object specifies whether or not the Echo Cancellation
is enabled for the interface.
The default value of this object is 'true'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.85.1.4.1.1.6 |
| ccasVoiceCfgEchoCancelCoverage The object specifies the Echo Canceller coverage for
the interface. This object is valid if the
ccasVoiceCfgEchoCancelEnable object is 'true'.
echoCanceller8ms - 8 milliseconds … | column | Enumeration | .1.3.6.1.4.1.9.9.85.1.4.1.1.7 |
| ccasVoiceCfgConnectionMode The object indicates the connection mode of the interface.
normal - the interface acts normally to handle incoming
and outgoing call.
trunk - the interface acts in trunk… | column | Enumeration | .1.3.6.1.4.1.9.9.85.1.4.1.1.8 |
| ccasVoiceCfgConnectionNumber This is the E.164 phone number that is used to
establish connection with trunking mode or PLAR mode.
If the ccasVoiceCfgConnectionMode is 'normal', then this
object will be a ze… | column | OctetString | .1.3.6.1.4.1.9.9.85.1.4.1.1.9 |