ccasVoiceCfgEntry

CISCO-CAS-IF-MIB · .1.3.6.1.4.1.9.9.85.1.4.1.1

MIB view Table view

Object

row

An entry in the voice specific configuration table for each 
CAS/DS0 group of a DS1.
The entry is created if the associated CAS/DS0 group is
created and the voice hardware is detected to support the
voice capability for the CAS/DS0 group in the managed
system.
The entry is deleted when its associated CAS/DS0 group is
deleted.

Context

MIB: CISCO-CAS-IF-MIB
OID: .1.3.6.1.4.1.9.9.85.1.4.1.1
Type: row
Status: current
Parent: ccasVoiceCfgTable
Table: ccasVoiceCfgTable
Children: 12

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
ccasVoiceCfgNoiseRegEnable The object indicates whether or not the background noise should be played to fill silence gaps if VAD is activated. The default value of this object is 'true'.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.85.1.4.1.1.1`
ccasVoiceCfgInitialDigitTimeOut This is the initial digit timeout that indicates the amount of time the managed system waits for an initial input digit from the caller. The timer is activated when the call is ac…	column	seconds Integer32	`.1.3.6.1.4.1.9.9.85.1.4.1.1.10`
ccasVoiceCfgInterDigitTimeOut This is the inter-digit timeout that indicates the amount of time the managed system waits for a subsequent input digit from the caller. The timer is started upon receipt of an in…	column	seconds Integer32	`.1.3.6.1.4.1.9.9.85.1.4.1.1.11`
ccasVoiceCfgRegionalTone This object contains the current regional setting for the call progress tone to be used by this CAS group.	column	CISCO-TCCountryCode	`.1.3.6.1.4.1.9.9.85.1.4.1.1.12`
ccasVoiceCfgNonLinearProcEnable The object indicates whether or not the Nonlinear Processing is enabled for the interface. The default value of this object is 'true'.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.85.1.4.1.1.2`
ccasVoiceCfgMusicOnHoldThreshold The object specifies the Music On Hold Threshold for the interface. The default value of this object is -38 dBm.	column	dBm Integer32	`.1.3.6.1.4.1.9.9.85.1.4.1.1.3`
ccasVoiceCfgInGain This object contains the amount of gain inserted at the receiver side of the interface. The input gain settings only define a gain/loss relative to the 0 dB setting. The absolute …	column	dB Integer32	`.1.3.6.1.4.1.9.9.85.1.4.1.1.4`
ccasVoiceCfgOutAttn This object contains the amount of attenuation inserted at the transmit side of the interface. The output attenuation settings only define a loss relative to the 0 dB setting. T…	column	dB Integer32	`.1.3.6.1.4.1.9.9.85.1.4.1.1.5`
ccasVoiceCfgEchoCancelEnable The object specifies whether or not the Echo Cancellation is enabled for the interface. The default value of this object is 'true'.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.85.1.4.1.1.6`
ccasVoiceCfgEchoCancelCoverage The object specifies the Echo Canceller coverage for the interface. This object is valid if the ccasVoiceCfgEchoCancelEnable object is 'true'. echoCanceller8ms - 8 milliseconds …	column	Enumeration	`.1.3.6.1.4.1.9.9.85.1.4.1.1.7`
ccasVoiceCfgConnectionMode The object indicates the connection mode of the interface. normal - the interface acts normally to handle incoming and outgoing call. trunk - the interface acts in trunk…	column	Enumeration	`.1.3.6.1.4.1.9.9.85.1.4.1.1.8`
ccasVoiceCfgConnectionNumber This is the E.164 phone number that is used to establish connection with trunking mode or PLAR mode. If the ccasVoiceCfgConnectionMode is 'normal', then this object will be a ze…	column	OctetString	`.1.3.6.1.4.1.9.9.85.1.4.1.1.9`

Indexes

Object	Type	Syntax	OID
IF-MIBifIndex A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remai…	column	InterfaceIndex	`.1.3.6.1.2.1.2.2.1.1`
ccasGrpCfgIndex An arbitrary index that uniquely identifies a DS0 group in a T1/E1.	column	Integer32	`.1.3.6.1.4.1.9.9.85.1.2.1.1.1.1`