ccasGrpEMTmPttRcv
CISCO-CAS-IF-MIB ·
.1.3.6.1.4.1.9.9.85.1.2.2.2.1.14
Object
column
r/w
minutes Integer32
This object signifies LMR port maximum receive time. This object is relevant to how long LMR port can continue receive voice packet without pause.
Context
- MIB
- CISCO-CAS-IF-MIB
- OID
.1.3.6.1.4.1.9.9.85.1.2.2.2.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Units
- minutes
- Parent
- ccasGrpEMTmEntry
- Table
- ccasGrpEMTmTable
- Siblings
- 14
Syntax
minutes Integer32
Values & Constraints
Object Constraints
range: 0-30
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ccasGrpEMTmClearWaitDuration Time of Inactive incoming seizure signal to declare call
cleared.
This object is relevant to the interfaces in the CAS
group if the ccasGrpCfgType object is emWinkStart(1) or
emWi… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.85.1.2.2.2.1.1 |
| ccasGrpEMTmPulseInterDigitDuration Outgoing Pulse dialing inter-digit timing in
milliseconds.
This object is relevant to the addressing timing of the
interfaces in the CAS group only if ccasGrpCfgDialType
is pulse.… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.85.1.2.2.2.1.10 |
| ccasGrpEMTmVoiceHangover The hangover time used to determine there is no more
voice packet arrived.
The default value of this object is 250 milliseconds. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.85.1.2.2.2.1.11 |
| ccasGrpEMTmLmrTeardown LMR port tear down timeout.
This object is relevant to the waiting time of
teardown call on LMR port.
If the value of this object is '-1', then the timeout
is disable. | column | seconds Integer32 | .1.3.6.1.4.1.9.9.85.1.2.2.2.1.12 |
| ccasGrpEMTmPttXmt This object signifies LMR port maximum transmit time.
This object is relevant to how long LMR port can
continue transmit voice packet without pause. | column | minutes Integer32 | .1.3.6.1.4.1.9.9.85.1.2.2.2.1.13 |
| ccasGrpEMTmDelayVoice This object is relevant to how long LMR will delay
sending the voice packet to the LMR port. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.85.1.2.2.2.1.15 |
| ccasGrpEMTmMaxWinkWaitDuration Maximum wink wait duration for sending out wink start
signaling.
This object is relevant to the interfaces in the CAS
group if the ccasGrpCfgType object
is emWinkStart(1) or emWi… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.85.1.2.2.2.1.2 |
| ccasGrpEMTmMaxWinkDuration Maximum wink duration for sending out wink start
signaling.
This object is relevant to the interfaces in the CAS
group if the ccasGrpCfgType object is emWinkStart(1)
or emWinkSta… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.85.1.2.2.2.1.3 |
| ccasGrpEMTmDelayStart Timing of generation of outgoing delayed start signal
from detection of incoming seizure.
This object is relevant to the interfaces of the CAS
group if the ccasGrpCfgType object … | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.85.1.2.2.2.1.4 |
| ccasGrpEMTmMaxDelayDuration Maximum delay signal duration for sending out delay dial
signaling.
This object is relevant to the interfaces in the CAS
group if the ccasGrpCfgType object is emDelayDial(4).
The… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.85.1.2.2.2.1.5 |
| ccasGrpEMTmMinDelayPulseWidth Minimum delay-dial pulse duration for incoming call.
If the value of this object is 0, then no delay-dial
is sent to the far end for the incoming call.
This object is relevant to … | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.85.1.2.2.2.1.6 |
| ccasGrpEMTmDigitDuration Outgoing DTMF/MF digit duration in milliseconds.
This object is not relevant to the addressing timing of
the interfaces in the CAS group if ccasGrpCfgDialType
is dtmf or R2 tone.
… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.85.1.2.2.2.1.7 |
| ccasGrpEMTmInterDigitDuration Outgoing DTMF/MF inter-digit duration in milliseconds.
This object is not relevant to the addressing timing of
the interfaces in the CAS group if ccasGrpCfgDialType
is dtmf or R2 … | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.85.1.2.2.2.1.8 |
| ccasGrpEMTmPulseRate Outgoing Pulse dialing rate in pulses per second (pps).
This object is relevant to the addressing timing of the
interfaces in the CAS group only if ccasGrpCfgDialType
is pulse.
Th… | column | pulses per second Integer32 | .1.3.6.1.4.1.9.9.85.1.2.2.2.1.9 |