CISCO-ATM-SIG-DIAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
40

csfFilterTable

table
.1.3.6.1.4.1.9.9.78.1.2.1 · 1 row entry · 17 columns
Open in standard view 
The table whose entries describe the filtering criteria 
for recording failed connection setup requests.
csfFilterEntry entry .1.3.6.1.4.1.9.9.78.1.2.1.1
Each entry in this table corresponds to a filtering criteria
based on which the rejected calls are recorded. This selection
criteria is applied against all connection setup failures
generated/detected at this ATM dev…
Indexes
csfFilterIndex
Column Syntax OID
csfFilterIndex
An arbitrary integer uniquely identifying a filtering
criteria.
Integer32
Constraints:
range: 1-50
 .1.3.6.1.4.1.9.9.78.1.2.1.1.1
csfFilterScope
This object restricts the scope of the filter to calls which
where rejected either within the system in which the filtering
is in progress or to calls which were rejected on external
ATM devices but transited throug…
Enumerationr/w
Enumerated Values:
1localRejects
2remoteRejects
3allRejects
 .1.3.6.1.4.1.9.9.78.1.2.1.1.2
csfFilterConnKind
This object enables the user to track failures of soft
permanent virtual channel connections, soft permanent virtual
path connections, switched virtual channel connections, and/or
switched virtual path connections.
OctetStringr/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.9.9.78.1.2.1.1.3
csfFilterConnCastType
This object restricts the scope of the filter based on the
type of topology of connections (point-to-point or
point-to-multipoint).
OctetStringr/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.9.9.78.1.2.1.1.4
csfFilterServiceCategory
This object restricts the scope of the filter to calls
belonging to service categories represented by this object.
OctetStringr/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.9.9.78.1.2.1.1.5
csfFilterInInterface
This object restricts the scope of the filter to calls which
entered the ATM device through the port represented by this object
It has the value 0, or the ifIndex value of an ATM Interface.
The value zero indicates that…
CISCO-TCInterfaceIndexOrZeror/w
Textual Convention: CISCO-TCInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.78.1.2.1.1.6
csfFilterOutInterface
This object restricts the scope of the filter to calls which
exited the ATM device through the port represented by this object
It has the value 0, or the ifIndex value of an ATM Interface.
The value zero indicates that …
CISCO-TCInterfaceIndexOrZeror/w
Textual Convention: CISCO-TCInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.78.1.2.1.1.7
csfFilterCause
This object restricts the scope of the filter to calls which
were cleared with the cause code represented by this object.
The values are the same as the clear code values mentioned
in the ATM forum UNI specifications.T…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.78.1.2.1.1.8
csfFilterCallingParty
The combination of this object and the corresponding instance
of csfFilterCallingPartyMask is one selection criteria
for this record. To match this selection criteria, a failed
connection setup must have a Calling P…
AtmAddrr/w
Textual Convention: AtmAddr OctetString
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.9.9.78.1.2.1.1.9
csfFilterCallingPartyMask
The combination of this object and the corresponding
instance of csfFilterCallingParty is one selection
criteria for this record. To match this selection criteria,
a failed connection setup must have a Calling Party…
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.9.9.78.1.2.1.1.10
csfFilterCalledParty
The combination of this object and the corresponding instance
of csfFilterCalledPartyMask is one selection criteria
for this record. To match this selection criteria, a failed
connection setup must have a called par…
AtmAddrr/w
Textual Convention: AtmAddr OctetString
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.9.9.78.1.2.1.1.11
csfFilterCalledPartyMask
The combination of this object and the corresponding instance of
csfFilterCalledParty is one selection criteria for this
record. To match this selection criteria, a failed connection
setup must have a Calling Party …
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.9.9.78.1.2.1.1.12
csfFilterMaxRecords
The maximum number of entries that are desired in the
csfRecordTable on behalf of this entry. The agent will not create
more than this number of entries in the table,but may choose
to create fewer entries in the csfRec…
Integer32r/w
Constraints:
range: -1-214783647
 .1.3.6.1.4.1.9.9.78.1.2.1.1.13
csfFilterAgeTimeout
The number of seconds left for this entry to age out.
On expiry of this timer filtering is disabled for this entry.
The display records in the csfRecordTable corresponding
to this entry are retained. When the timer ex…
secondsInteger32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.9.9.78.1.2.1.1.14
csfFilterPurge
The object provides a facility for the user to purge the records
in the csfRecordTable corresponding to this entry. When
the value is set to 'purge', the records in the
csfRecordTable corresponding to this entry are…
Enumerationr/w
Enumerated Values:
1purge
2noop
 .1.3.6.1.4.1.9.9.78.1.2.1.1.15
csfFilterNumMatches
A monotonically increasing counter to keep track of the
number of call failures that matched this entry for
the entire lifetime of this entry.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.78.1.2.1.1.16
csfFilterRowStatus
Indicates the status of this row. Used according to the row
installation and removal conventions. This object can be used
to temporarily inactivate an entry in the table. When this object
is set to a value 'notInServi…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.78.1.2.1.1.17

csfRecordTable

table
.1.3.6.1.4.1.9.9.78.1.3.1 · 1 row entry · 19 columns
Open in standard view 
The table in which the failures of ATM Signalling connection 
setup requests are recorded.
csfRecordEntry entry .1.3.6.1.4.1.9.9.78.1.3.1.1
An entry representing one connection setup request failure
record. The csfRecordFilterIndex represents the
index into the csfFilterTable whose entry is the
filtering criteria applied against all connection setup
fa…
Indexes
csfFilterIndex csfRecordIndex
Column Syntax OID
csfRecordIndex
An arbitrary integer used to distinguish between multiple
records for the same filtering criteria.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.78.1.3.1.1.1
csfRecordScope
This object indicates the location of the call failure.
Enumeration
Enumerated Values:
1localReject
2remoteReject
 .1.3.6.1.4.1.9.9.78.1.3.1.1.2
csfRecordConnKind
This object represents the use of call control of the
rejected connection.
Enumeration
Enumerated Values:
1softPvcc
2softPvpc
3switchedVcc
4switchedVpc
 .1.3.6.1.4.1.9.9.78.1.3.1.1.3
csfRecordConnCastType
This object represents the type of topology of the
rejected call (point-to-point or point-to-multipoint).
Enumeration
Enumerated Values:
1p2p
2p2mp
 .1.3.6.1.4.1.9.9.78.1.3.1.1.4
csfRecordConnIndicator
Indicates whether this record was created due to an add
party failure or a setup failure.
Enumeration
Enumerated Values:
1addPartyReject
2setupReject
 .1.3.6.1.4.1.9.9.78.1.3.1.1.5
csfRecordServiceCategory
This object represents the service category used by the call.
PNNI-MIBServiceCategory
Textual Convention: PNNI-MIBServiceCategory Enumeration
Type Values:
1other
2cbr
3rtVbr
4nrtVbr
5abr
6ubr
 .1.3.6.1.4.1.9.9.78.1.3.1.1.6
csfRecordInInterface
The IfIndex of the incoming port on which this call was received
by the ATM device.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.9.78.1.3.1.1.7
csfRecordOutInterface
The IfIndex of the outgoing port ,if available, through which
this call was routed to the network. The distinguished value zero
indicates that the call was rejected before any outgoing
interface was chosen.
CISCO-TCInterfaceIndexOrZero
Textual Convention: CISCO-TCInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.78.1.3.1.1.8
csfRecordCause
This object identifies the reason for the call failure. When
a PNNI Crankback information element is included in the call
clearing message, this object contains the crankback cause.
In all other cases, the values are…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.78.1.3.1.1.9
csfRecordDiags
This object contains the contents of the diagnostics fields
from the Cause information element. When the value of
csfRecordCause is 49,'Quality of Service unavailable',
the diagnostics are taken from the PNNI Crankba…
OctetString
Constraints:
range: 0-17
 .1.3.6.1.4.1.9.9.78.1.3.1.1.10
csfRecordCallingParty
Indicates the ATM adddress of the calling party in the
rejected call.
AtmAddr
Textual Convention: AtmAddr OctetString
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.9.9.78.1.3.1.1.11
csfRecordCallingPartySubAddress
Indicates the ATM sub-adddress of the calling party in the
rejected call. The presence of a sub address is not mandatory.
If the calling sub-addresses is not present in the call then
this object will have a null value.
AtmAddr
Textual Convention: AtmAddr OctetString
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.9.9.78.1.3.1.1.12
csfRecordCalledParty
Indicates the ATM address of the called party in the
rejected call.
AtmAddr
Textual Convention: AtmAddr OctetString
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.9.9.78.1.3.1.1.13
csfRecordCalledPartySubAddress
Indicates the ATM sub-adddress of the called party in the
rejected call. The presence of a sub address is not mandatory.
If the called sub-address is not present in the call then
this object will have a null value.
AtmAddr
Textual Convention: AtmAddr OctetString
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.9.9.78.1.3.1.1.14
csfRecordCrankBackTransitType
This object identifies the type of blockage in case of
a blocked call. This object has a value 'noCrankBack' if the
call was cleared without a crankback information element.
Enumeration
Enumerated Values:
1blockedIncomingPort
2blockedNode
3blockedLink
4noCrankBack
 .1.3.6.1.4.1.9.9.78.1.3.1.1.15
csfRecordCrankBackNodeId
This object depends on the csfRecordCrankBackTransitType
object. When that object value is 'blockedNode',
csfRecordCrankBackNodeId indicates the node ID of
the blocked node. When the csfRecordCrankBackTransitType
objec…
PNNI-MIBPnniNodeId
Textual Convention: PNNI-MIBPnniNodeId OctetString
Type Constraints:
range: 22
 .1.3.6.1.4.1.9.9.78.1.3.1.1.16
csfRecordCrankBackPortId
When the csfRecordCrankBackTransitType object value
is 'blockedLink', this object identifies a logical port of the
blocked link's preceeding node identifier. The distinguished
value zero indicates that no port is sp…
PNNI-MIBPnniPortId
Textual Convention: PNNI-MIBPnniPortId Unsigned32
 .1.3.6.1.4.1.9.9.78.1.3.1.1.17
csfRecordCrankBackSucceedingNodeId
This object depends on the csfRecordCrankBackTransitType
object. If the csfRecordCrankBackNodeId object value
is 'blockedLink' then the value of this object will identify
the logical node succeeding a link at which the…
PNNI-MIBPnniNodeId
Textual Convention: PNNI-MIBPnniNodeId OctetString
Type Constraints:
range: 22
 .1.3.6.1.4.1.9.9.78.1.3.1.1.18
csfRecordTimeStamp
The time at which this record entry was created.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.9.78.1.3.1.1.19

csfDtlTable

table
.1.3.6.1.4.1.9.9.78.1.3.2 · 1 row entry · 4 columns
Open in standard view 
The table in which the Designated Transit List (DTL)stacks 
(i.e., source routes) of failed calls  are recorded. Each DTL 
identifies a source route through a single peer group. 
DTL's are represented as a series of logical Node IDs and 
logical Port IDs.
csfDtlEntry entry .1.3.6.1.4.1.9.9.78.1.3.2.1
A segment of the DTL stack. The complete DTL stack is formed
by traversing the rows of the table for which the csfFilterIndex
and csfRecordIndex are the same. Level transitions are indicated
using the csfDtlLinkType.…
Indexes
csfFilterIndex csfRecordIndex csfDtlEntryIndex
Column Syntax OID
csfDtlEntryIndex
The index in the current DTL stack of this entry. This
index represents the the order of this entry in the DTL
stack.
Integer32
Constraints:
range: 1-200
 .1.3.6.1.4.1.9.9.78.1.3.2.1.1
csfDtlNodeId
Each entry in the DTL table corresponds to a node/port tuple
based on which a source route through the peer group is built.
This object represents the node id in the tuple
PNNI-MIBPnniNodeId
Textual Convention: PNNI-MIBPnniNodeId OctetString
Type Constraints:
range: 22
 .1.3.6.1.4.1.9.9.78.1.3.2.1.2
csfDtlPortId
Each entry in the DTL table corresponds to a node/port tuple
based on which a source route through the peer group is built.
This object represents the port id in the tuple
PNNI-MIBPnniPortId
Textual Convention: PNNI-MIBPnniPortId Unsigned32
 .1.3.6.1.4.1.9.9.78.1.3.2.1.3
csfDtlLinkType
The type of link out from the node identified by csfDtlNodeId.
This is well defined even if the specific port is not specified.
A value 'horizontal' indicates a normal link within the containing
peer group. A value …
Enumeration
Enumerated Values:
1invalid
2horizontal
3uplink
4last
 .1.3.6.1.4.1.9.9.78.1.3.2.1.4