csfFilterCallingPartyMask
CISCO-ATM-SIG-DIAG-MIB ·
.1.3.6.1.4.1.9.9.78.1.2.1.1.10
Object
column
r/w
OctetString
The combination of this object and the corresponding instance of csfFilterCallingParty is one selection criteria for this record. To match this selection criteria, a failed connection setup must have a Calling Party Address which equals the value of csfFilterCallingParty for all bit positions identified by the value of csfFilterCallingPartyMask. If the mask value is shorter than the length of csfFilterCallingParty, then it is extended with zero bits to be the required length. If the default value for this object is retained then the rejected call will match this filtering criterion if and only if the calling address in the call matches the csfFilterCallingParty for this entry.
Context
- MIB
- CISCO-ATM-SIG-DIAG-MIB
- OID
.1.3.6.1.4.1.9.9.78.1.2.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- csfFilterEntry
- Table
- csfFilterTable
- Siblings
- 16
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-20
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| csfFilterIndex An arbitrary integer uniquely identifying a filtering
criteria. | column | Integer32 | .1.3.6.1.4.1.9.9.78.1.2.1.1.1 |
| csfFilterCalledParty The combination of this object and the corresponding instance
of csfFilterCalledPartyMask is one selection criteria
for this record. To match this selection criteria, a failed … | column | AtmAddr | .1.3.6.1.4.1.9.9.78.1.2.1.1.11 |
| csfFilterCalledPartyMask The combination of this object and the corresponding instance of
csfFilterCalledParty is one selection criteria for this
record. To match this selection criteria, a failed conn… | column | OctetString | .1.3.6.1.4.1.9.9.78.1.2.1.1.12 |
| csfFilterMaxRecords The maximum number of entries that are desired in the
csfRecordTable on behalf of this entry. The agent will not create
more than this number of entries in the table,but may choo… | column | Integer32 | .1.3.6.1.4.1.9.9.78.1.2.1.1.13 |
| csfFilterAgeTimeout The number of seconds left for this entry to age out.
On expiry of this timer filtering is disabled for this entry.
The display records in the csfRecordTable corresponding
to th… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.78.1.2.1.1.14 |
| csfFilterPurge The object provides a facility for the user to purge the records
in the csfRecordTable corresponding to this entry. When
the value is set to 'purge', the records in the
csfRec… | column | Enumeration | .1.3.6.1.4.1.9.9.78.1.2.1.1.15 |
| csfFilterNumMatches A monotonically increasing counter to keep track of the
number of call failures that matched this entry for
the entire lifetime of this entry. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.78.1.2.1.1.16 |
| csfFilterRowStatus Indicates the status of this row. Used according to the row
installation and removal conventions. This object can be used
to temporarily inactivate an entry in the table. When th… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.78.1.2.1.1.17 |
| csfFilterScope This object restricts the scope of the filter to calls which
where rejected either within the system in which the filtering
is in progress or to calls which were rejected on ex… | column | Enumeration | .1.3.6.1.4.1.9.9.78.1.2.1.1.2 |
| csfFilterConnKind This object enables the user to track failures of soft
permanent virtual channel connections, soft permanent virtual
path connections, switched virtual channel connections, and/… | column | OctetString | .1.3.6.1.4.1.9.9.78.1.2.1.1.3 |
| csfFilterConnCastType This object restricts the scope of the filter based on the
type of topology of connections (point-to-point or
point-to-multipoint). | column | OctetString | .1.3.6.1.4.1.9.9.78.1.2.1.1.4 |
| csfFilterServiceCategory This object restricts the scope of the filter to calls
belonging to service categories represented by this object. | column | OctetString | .1.3.6.1.4.1.9.9.78.1.2.1.1.5 |
| csfFilterInInterface This object restricts the scope of the filter to calls which
entered the ATM device through the port represented by this object
It has the value 0, or the ifIndex value of an ATM … | column | CISCO-TCInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.78.1.2.1.1.6 |
| csfFilterOutInterface This object restricts the scope of the filter to calls which
exited the ATM device through the port represented by this object
It has the value 0, or the ifIndex value of an ATM I… | column | CISCO-TCInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.78.1.2.1.1.7 |
| csfFilterCause This object restricts the scope of the filter to calls which
were cleared with the cause code represented by this object.
The values are the same as the clear code values mention… | column | Integer32 | .1.3.6.1.4.1.9.9.78.1.2.1.1.8 |
| csfFilterCallingParty The combination of this object and the corresponding instance
of csfFilterCallingPartyMask is one selection criteria
for this record. To match this selection criteria, a failed… | column | AtmAddr | .1.3.6.1.4.1.9.9.78.1.2.1.1.9 |