csfRecordCalledParty
CISCO-ATM-SIG-DIAG-MIB ·
.1.3.6.1.4.1.9.9.78.1.3.1.1.13
Object
column
AtmAddr
Indicates the ATM address of the called party in the rejected call.
Context
- MIB
- CISCO-ATM-SIG-DIAG-MIB
- OID
.1.3.6.1.4.1.9.9.78.1.3.1.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- csfRecordEntry
- Table
- csfRecordTable
- Siblings
- 18
Syntax
AtmAddr
- Source
- AtmAddr
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0
range: 8
range: 20
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| csfRecordIndex An arbitrary integer used to distinguish between multiple
records for the same filtering criteria. | column | Integer32 | .1.3.6.1.4.1.9.9.78.1.3.1.1.1 |
| csfRecordDiags This object contains the contents of the diagnostics fields
from the Cause information element. When the value of
csfRecordCause is 49,'Quality of Service unavailable',
the dia… | column | OctetString | .1.3.6.1.4.1.9.9.78.1.3.1.1.10 |
| csfRecordCallingParty Indicates the ATM adddress of the calling party in the
rejected call. | column | AtmAddr | .1.3.6.1.4.1.9.9.78.1.3.1.1.11 |
| csfRecordCallingPartySubAddress Indicates the ATM sub-adddress of the calling party in the
rejected call. The presence of a sub address is not mandatory.
If the calling sub-addresses is not present in the call t… | column | AtmAddr | .1.3.6.1.4.1.9.9.78.1.3.1.1.12 |
| csfRecordCalledPartySubAddress Indicates the ATM sub-adddress of the called party in the
rejected call. The presence of a sub address is not mandatory.
If the called sub-address is not present in the call then … | column | AtmAddr | .1.3.6.1.4.1.9.9.78.1.3.1.1.14 |
| csfRecordCrankBackTransitType This object identifies the type of blockage in case of
a blocked call. This object has a value 'noCrankBack' if the
call was cleared without a crankback information element. | column | Enumeration | .1.3.6.1.4.1.9.9.78.1.3.1.1.15 |
| csfRecordCrankBackNodeId This object depends on the csfRecordCrankBackTransitType
object. When that object value is 'blockedNode',
csfRecordCrankBackNodeId indicates the node ID of
the blocked node. When… | column | PNNI-MIBPnniNodeId | .1.3.6.1.4.1.9.9.78.1.3.1.1.16 |
| csfRecordCrankBackPortId When the csfRecordCrankBackTransitType object value
is 'blockedLink', this object identifies a logical port of the
blocked link's preceeding node identifier. The distinguished … | column | PNNI-MIBPnniPortId | .1.3.6.1.4.1.9.9.78.1.3.1.1.17 |
| csfRecordCrankBackSucceedingNodeId This object depends on the csfRecordCrankBackTransitType
object. If the csfRecordCrankBackNodeId object value
is 'blockedLink' then the value of this object will identify
the log… | column | PNNI-MIBPnniNodeId | .1.3.6.1.4.1.9.9.78.1.3.1.1.18 |
| csfRecordTimeStamp The time at which this record entry was created. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.78.1.3.1.1.19 |
| csfRecordScope This object indicates the location of the call failure. | column | Enumeration | .1.3.6.1.4.1.9.9.78.1.3.1.1.2 |
| csfRecordConnKind This object represents the use of call control of the
rejected connection. | column | Enumeration | .1.3.6.1.4.1.9.9.78.1.3.1.1.3 |
| csfRecordConnCastType This object represents the type of topology of the
rejected call (point-to-point or point-to-multipoint). | column | Enumeration | .1.3.6.1.4.1.9.9.78.1.3.1.1.4 |
| csfRecordConnIndicator Indicates whether this record was created due to an add
party failure or a setup failure. | column | Enumeration | .1.3.6.1.4.1.9.9.78.1.3.1.1.5 |
| csfRecordServiceCategory This object represents the service category used by the call. | column | PNNI-MIBServiceCategory | .1.3.6.1.4.1.9.9.78.1.3.1.1.6 |
| csfRecordInInterface The IfIndex of the incoming port on which this call was received
by the ATM device. | column | Integer32 | .1.3.6.1.4.1.9.9.78.1.3.1.1.7 |
| csfRecordOutInterface The IfIndex of the outgoing port ,if available, through which
this call was routed to the network. The distinguished value zero
indicates that the call was rejected before any… | column | CISCO-TCInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.78.1.3.1.1.8 |
| csfRecordCause This object identifies the reason for the call failure. When
a PNNI Crankback information element is included in the call
clearing message, this object contains the crankback c… | column | Integer32 | .1.3.6.1.4.1.9.9.78.1.3.1.1.9 |