csfRecordCrankBackPortId
CISCO-ATM-SIG-DIAG-MIB ·
.1.3.6.1.4.1.9.9.78.1.3.1.1.17
Object
column
PNNI-MIBPnniPortId
When the csfRecordCrankBackTransitType object value is 'blockedLink', this object identifies a logical port of the blocked link's preceeding node identifier. The distinguished value zero indicates that no port is specified. For all values of csfRecordCrankBackTransitType other than 'blockedLink', this object is set to zero.
Context
- MIB
- CISCO-ATM-SIG-DIAG-MIB
- OID
.1.3.6.1.4.1.9.9.78.1.3.1.1.17- Type
- column
- Access
- readonly
- Status
- current
- Parent
- csfRecordEntry
- Table
- csfRecordTable
- Siblings
- 18
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| csfRecordIndex An arbitrary integer used to distinguish between multiple
records for the same filtering criteria. | column | Integer32 | .1.3.6.1.4.1.9.9.78.1.3.1.1.1 |
| csfRecordDiags This object contains the contents of the diagnostics fields
from the Cause information element. When the value of
csfRecordCause is 49,'Quality of Service unavailable',
the dia… | column | OctetString | .1.3.6.1.4.1.9.9.78.1.3.1.1.10 |
| csfRecordCallingParty Indicates the ATM adddress of the calling party in the
rejected call. | column | AtmAddr | .1.3.6.1.4.1.9.9.78.1.3.1.1.11 |
| csfRecordCallingPartySubAddress Indicates the ATM sub-adddress of the calling party in the
rejected call. The presence of a sub address is not mandatory.
If the calling sub-addresses is not present in the call t… | column | AtmAddr | .1.3.6.1.4.1.9.9.78.1.3.1.1.12 |
| csfRecordCalledParty Indicates the ATM address of the called party in the
rejected call. | column | AtmAddr | .1.3.6.1.4.1.9.9.78.1.3.1.1.13 |
| csfRecordCalledPartySubAddress Indicates the ATM sub-adddress of the called party in the
rejected call. The presence of a sub address is not mandatory.
If the called sub-address is not present in the call then … | column | AtmAddr | .1.3.6.1.4.1.9.9.78.1.3.1.1.14 |
| csfRecordCrankBackTransitType This object identifies the type of blockage in case of
a blocked call. This object has a value 'noCrankBack' if the
call was cleared without a crankback information element. | column | Enumeration | .1.3.6.1.4.1.9.9.78.1.3.1.1.15 |
| csfRecordCrankBackNodeId This object depends on the csfRecordCrankBackTransitType
object. When that object value is 'blockedNode',
csfRecordCrankBackNodeId indicates the node ID of
the blocked node. When… | column | PNNI-MIBPnniNodeId | .1.3.6.1.4.1.9.9.78.1.3.1.1.16 |
| csfRecordCrankBackSucceedingNodeId This object depends on the csfRecordCrankBackTransitType
object. If the csfRecordCrankBackNodeId object value
is 'blockedLink' then the value of this object will identify
the log… | column | PNNI-MIBPnniNodeId | .1.3.6.1.4.1.9.9.78.1.3.1.1.18 |
| csfRecordTimeStamp The time at which this record entry was created. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.78.1.3.1.1.19 |
| csfRecordScope This object indicates the location of the call failure. | column | Enumeration | .1.3.6.1.4.1.9.9.78.1.3.1.1.2 |
| csfRecordConnKind This object represents the use of call control of the
rejected connection. | column | Enumeration | .1.3.6.1.4.1.9.9.78.1.3.1.1.3 |
| csfRecordConnCastType This object represents the type of topology of the
rejected call (point-to-point or point-to-multipoint). | column | Enumeration | .1.3.6.1.4.1.9.9.78.1.3.1.1.4 |
| csfRecordConnIndicator Indicates whether this record was created due to an add
party failure or a setup failure. | column | Enumeration | .1.3.6.1.4.1.9.9.78.1.3.1.1.5 |
| csfRecordServiceCategory This object represents the service category used by the call. | column | PNNI-MIBServiceCategory | .1.3.6.1.4.1.9.9.78.1.3.1.1.6 |
| csfRecordInInterface The IfIndex of the incoming port on which this call was received
by the ATM device. | column | Integer32 | .1.3.6.1.4.1.9.9.78.1.3.1.1.7 |
| csfRecordOutInterface The IfIndex of the outgoing port ,if available, through which
this call was routed to the network. The distinguished value zero
indicates that the call was rejected before any… | column | CISCO-TCInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.78.1.3.1.1.8 |
| csfRecordCause This object identifies the reason for the call failure. When
a PNNI Crankback information element is included in the call
clearing message, this object contains the crankback c… | column | Integer32 | .1.3.6.1.4.1.9.9.78.1.3.1.1.9 |