CIE1000-LLDP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

106

cie1000LldpConfigMedPolicyTable

table

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.2 · 1 row entry · 7 columns

Open in standard view

This is a table to configure LLDP MED Policies for the device.

cie1000LldpConfigMedPolicyEntry entry .1.3.6.1.4.1.9.9.832.1.34.1.2.3.2.1

Network Policy Discovery enables the efficient discovery and diagnosis
of mismatch issues with the VLAN configuration, along with the
associated Layer 2 and Layer 3 attributes, which apply for a set of
specific protocol…

Indexes

cie1000LldpConfigMedPolicyLldpmedPolicy

Column Syntax OID

cie1000LldpConfigMedPolicyLldpmedPolicy

Policy index.

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.2.1.1

cie1000LldpConfigMedPolicyApplicationType

The LLDP policy application type.

CIE1000lldpmedRemoteNetworkPolicyApplicationTyper/w

Textual Convention: CIE1000lldpmedRemoteNetworkPolicyApplicationType Enumeration

Type Values:

1	voice
2	voiceSignaling
3	guestVoice
4	guestVoiceSignaling
5	softphoneVoice
6	videoConferencing
7	streamingVideo
8	videoSignaling

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.2.1.3

cie1000LldpConfigMedPolicyTagged

The LLDP policy tagged flag. Defines if LLDP policy uses tagged VLAN.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.2.1.4

cie1000LldpConfigMedPolicyVlanId

The LLDP policy VLAN ID. Only valid when policy 'Tagged' is TRUE

Unsigned32r/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.2.1.5

cie1000LldpConfigMedPolicyL2Priority

The LLDP policy L2 priority.

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.2.1.6

cie1000LldpConfigMedPolicyDscp

The LLDP policy DSCP.

Unsigned32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.2.1.7

cie1000LldpConfigMedPolicyAction

Action

CIE1000-TCCIE1000RowEditorStater/w

Textual Convention: CIE1000-TCCIE1000RowEditorState Unsigned32

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.2.1.100

cie1000LldpConfigMedPolicyListTable

table

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.3 · 1 row entry · 3 columns

Open in standard view

Each interface can be mapped to multiple policies. Set to TRUE in order
to enable the corresponding policy to be transmitted at the interface.
It is a requirement that the policy is defined.

cie1000LldpConfigMedPolicyListEntry entry .1.3.6.1.4.1.9.9.832.1.34.1.2.3.3.1

Each location information has a control parameter

Indexes

cie1000LldpConfigMedPolicyListIfIndex cie1000LldpConfigMedPolicyListLldpmedPolicy

Column Syntax OID

cie1000LldpConfigMedPolicyListIfIndex

Logical interface number index.

CIE1000-TCCIE1000InterfaceIndex

Textual Convention: CIE1000-TCCIE1000InterfaceIndex Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.3.1.1

cie1000LldpConfigMedPolicyListLldpmedPolicy

Policy index.

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.3.1.3

cie1000LldpConfigMedPolicyListLldpmedPoliciesList

Set to TRUE assign the corresponding policy index to the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.3.1.4

cie1000LldpConfigMedLocationInfTable

table

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.5 · 1 row entry · 2 columns

Open in standard view

The civic address location information. Each civic address can contain
up to 250 characters, but the total amount of characters for the
combined civic address locations must not exceed 250 bytes. Note: If an
civic address location is non-empty it uses the amount of characters
plus addition two characters. This is described in TIA1057, Section
10.2.4.3.2.

cie1000LldpConfigMedLocationInfEntry entry .1.3.6.1.4.1.9.9.832.1.34.1.2.3.5.1

Each civic address type as defined in TIA1057, Section 3.4 in Annex B

Indexes

cie1000LldpConfigMedLocationInfLldpmedIndex

Column Syntax OID

cie1000LldpConfigMedLocationInfLldpmedIndex

Civic address type.

1 - State/National subdivisions

2 - County, parish, gun (JP), district (IN)

3 - City, township

4 - City division, borough, city district, w…

CIE1000lldpmedCivicAddressType

Textual Convention: CIE1000lldpmedCivicAddressType Enumeration

Type Values:

1	state
2	county
3	city
4	district
5	block
6	street
16	leadingStreetDirection
17	trailingStreetSuffix
18	streetSuffix
19	houseNo
20	houseNoSuffix
21	landmark
22	additionalInfo
23	name
24	zipCode
25	building
26	apartment
27	floor
28	roomNumber
29	placeType
30	postalCommunityName
31	poBox
32	additionalCode

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.5.1.2

cie1000LldpConfigMedLocationInfCivicAddress

Civic address

OctetStringr/w

Constraints:
range: 0-250

.1.3.6.1.4.1.9.9.832.1.34.1.2.3.5.1.3

cie1000LldpStatusStatisticsTable

table

.1.3.6.1.4.1.9.9.832.1.34.1.3.1.2 · 1 row entry · 9 columns

Open in standard view

This table represents the LLDP interface counters

cie1000LldpStatusStatisticsEntry entry .1.3.6.1.4.1.9.9.832.1.34.1.3.1.2.1

Each port interface has a set of statistics counters

Indexes

cie1000LldpStatusStatisticsIfIndex

Column	Syntax	OID
cie1000LldpStatusStatisticsIfIndex Logical interface number index.	CIE1000-TCCIE1000InterfaceIndex Textual Convention: CIE1000-TCCIE1000InterfaceIndex `Integer32` Type Constraints: `range: 0..2147483647`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.1.2.1.1`
cie1000LldpStatusStatisticsTxTotal Shows the number of LLDP frames transmitted.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.1.2.1.2`
cie1000LldpStatusStatisticsRxTotal Shows the number of LLDP frames received.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.1.2.1.3`
cie1000LldpStatusStatisticsRxError Shows the number of received LLDP frames containing some kind of error.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.1.2.1.4`
cie1000LldpStatusStatisticsRxDiscarded Show the number of LLDP frames discarded. If a LLDP frame is received at an interface, and the switch's internal table has run full, the LLDP frame is counted and discarded. This situation is known as 'Too Many Neighbor…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.1.2.1.5`
cie1000LldpStatusStatisticsTLVsDiscarded Shows the number of TLVs discarded. Each LLDP frame can contain multiple pieces of information, known as TLVs (TLV is short for 'Type Length Value'). If a TLV is malformed, it is counted and discarded.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.1.2.1.6`
cie1000LldpStatusStatisticsTLVsUnrecognized Shows the number of well-formed TLVs, but with an unknown type value.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.1.2.1.7`
cie1000LldpStatusStatisticsTLVsOrgDiscarded Shows the number of well-formed TLVs, but with an organizationally TLV which is not supported.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.1.2.1.8`
cie1000LldpStatusStatisticsAgeOuts Show the number of age-outs. Each frame contains information about how long time the LLDP information is valid (age-out time). If no new LLDP frame is received within the age out time, the information is removed, and th…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.1.2.1.9`

cie1000LldpStatusNeighborsInfTable

table

.1.3.6.1.4.1.9.9.832.1.34.1.3.2 · 1 row entry · 9 columns

Open in standard view

This is a table to show the LLDP neighbors information for a specific
interface.

cie1000LldpStatusNeighborsInfEntry entry .1.3.6.1.4.1.9.9.832.1.34.1.3.2.1

Each interface has a set of neighbors information

Indexes

cie1000LldpStatusNeighborsInfIfIndex cie1000LldpStatusNeighborsInfLldpmedIndex

Column	Syntax	OID
cie1000LldpStatusNeighborsInfIfIndex Logical interface number index.	CIE1000-TCCIE1000InterfaceIndex Textual Convention: CIE1000-TCCIE1000InterfaceIndex `Integer32` Type Constraints: `range: 0..2147483647`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.2.1.1`
cie1000LldpStatusNeighborsInfLldpmedIndex Neighbor information table entry index.	Integer32 Constraints: `range: 0-192`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.2.1.2`
cie1000LldpStatusNeighborsInfChassisId Shows the LLDP neighbor's chassis Id.	OctetString Constraints: `range: 0-254`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.2.1.4`
cie1000LldpStatusNeighborsInfPortId Shows the LLDP neighbor's port id.	OctetString Constraints: `range: 0-254`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.2.1.5`
cie1000LldpStatusNeighborsInfPortDescription Shows the LLDP neighbor's port description.	OctetString Constraints: `range: 0-254`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.2.1.6`
cie1000LldpStatusNeighborsInfSystemName Shows the LLDP neighbor's system name.	OctetString Constraints: `range: 0-254`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.2.1.7`
cie1000LldpStatusNeighborsInfSystemDescription Shows the LLDP neighbor's system description.	OctetString Constraints: `range: 0-254`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.2.1.8`
cie1000LldpStatusNeighborsInfSystemCapabilities Shows the LLDP neighbor's system capabilities as bit mask. If the bit is set, it means that the functionality is supported by the neighbor system. Bit 0 represents Other. Bit…	CIE1000-TCCIE1000Unsigned16 Textual Convention: CIE1000-TCCIE1000Unsigned16 `Unsigned32` Type Constraints: `range: 0..65535`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.2.1.9`
cie1000LldpStatusNeighborsInfSystemCapabilitiesEnable Shows the LLDP neighbor's system capabilities which is enabled. If the bit is set, it means that the functionality is currently enabled at the neighbor system. Bit 0 represents Other. …	CIE1000-TCCIE1000Unsigned16 Textual Convention: CIE1000-TCCIE1000Unsigned16 `Unsigned32` Type Constraints: `range: 0..65535`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.2.1.10`

cie1000LldpStatusNeighborsMgmtInfTable

table

.1.3.6.1.4.1.9.9.832.1.34.1.3.3 · 1 row entry · 8 columns

Open in standard view

This is a table to show the LLDP neighbors information for a specific
interface.

cie1000LldpStatusNeighborsMgmtInfEntry entry .1.3.6.1.4.1.9.9.832.1.34.1.3.3.1

Each interface has a set of neighbors information

Indexes

cie1000LldpStatusNeighborsMgmtInfIfIndex cie1000LldpStatusNeighborsMgmtInfLldpmedIndex cie1000LldpStatusNeighborsMgmtInfLldpManagement

Column	Syntax	OID
cie1000LldpStatusNeighborsMgmtInfIfIndex Logical interface number index.	CIE1000-TCCIE1000InterfaceIndex Textual Convention: CIE1000-TCCIE1000InterfaceIndex `Integer32` Type Constraints: `range: 0..2147483647`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.3.1.1`
cie1000LldpStatusNeighborsMgmtInfLldpmedIndex Neighbor information table entry index.	Integer32 Constraints: `range: 0-192`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.3.1.2`
cie1000LldpStatusNeighborsMgmtInfLldpManagement Neighbor management information table entry index.	Integer32 Constraints: `range: 0-1`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.3.1.4`
cie1000LldpStatusNeighborsMgmtInfSystemMgmAddressSubtype LLDP neighbor's management address subtype , section 9.5.9.3 IEEE802.1AB-2005.	CIE1000-TCCIE1000Unsigned8 Textual Convention: CIE1000-TCCIE1000Unsigned8 `Unsigned32` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.3.1.5`
cie1000LldpStatusNeighborsMgmtInfSystemMgmtAddress LLDP neighbor's management address string, section 9.5.9.4 IEEE802.1AB-2005.	OctetString Constraints: `range: 0-31`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.3.1.6`
cie1000LldpStatusNeighborsMgmtInfSystemMgmtInterfaceSubtype Interface numbering subtype, section 9.5.9.5 IEEE802.1AB-2005.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.3.1.7`
cie1000LldpStatusNeighborsMgmtInfSystemMgmtInterface Interface number, section 9.5.9.6 IEEE802.1AB-2005.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.3.1.8`
cie1000LldpStatusNeighborsMgmtInfSystemMgmtOid Object identifier, section 9.5.9.8 IEEE802.1AB-2005.	ObjectIdentifier	`.1.3.6.1.4.1.9.9.832.1.34.1.3.3.1.9`

cie1000LldpStatusMedRemoteDeviceInfoTable

table

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1 · 1 row entry · 23 columns

Open in standard view

This is a table to show the LLDP neighbors information for a specific
interface.

cie1000LldpStatusMedRemoteDeviceInfoEntry entry .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1

Each interface has a set of neighbors information

Indexes

cie1000LldpStatusMedRemoteDeviceInfoIfIndex cie1000LldpStatusMedRemoteDeviceInfoLldpmedIndex

Column Syntax OID

cie1000LldpStatusMedRemoteDeviceInfoIfIndex

Logical interface number index.

CIE1000-TCCIE1000InterfaceIndex

Textual Convention: CIE1000-TCCIE1000InterfaceIndex Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.1

cie1000LldpStatusMedRemoteDeviceInfoLldpmedIndex

Neighbor information table entry index.

Integer32

Constraints:
range: 0-192

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.2

cie1000LldpStatusMedRemoteDeviceInfoCapabilities

LLDP neighbor's capabilities bit mask.

Bit 0 represents LLDP-MED capabilities.

Bit 1 represents Network Policy.

Bit 2 represents Location Identification.

Bit 3…

CIE1000-TCCIE1000Unsigned16

Textual Convention: CIE1000-TCCIE1000Unsigned16 Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.4

cie1000LldpStatusMedRemoteDeviceInfoCapabilitiesEnabled

LLDP neighbor's capabilities bit mask for the capabilities which are
currently enabled.

Bit 0 represents LLDP-MED capabilities.

Bit 1 represents Network Policy.

Bit 2 represe…

CIE1000-TCCIE1000Unsigned16

Textual Convention: CIE1000-TCCIE1000Unsigned16 Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.5

cie1000LldpStatusMedRemoteDeviceInfoLatitude

Latitude degrees in 2s-complement as specified in RFC 3825. Positive
numbers are north of the equator and negative numbers are south of the
equator.

CIE1000-TCCIE1000Integer64

Textual Convention: CIE1000-TCCIE1000Integer64 OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.6

cie1000LldpStatusMedRemoteDeviceInfoLongitude

Longitude degrees in 2s-complement as specified in RFC 3825. Positive
values are East of the prime meridian and negative numbers are West of
the prime meridian.

CIE1000-TCCIE1000Integer64

Textual Convention: CIE1000-TCCIE1000Integer64 OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.7

cie1000LldpStatusMedRemoteDeviceInfoAltitudeType

Altitude type as either floors or meters. Meters are representing
meters of altitude defined by the vertical datum specified. Floors are
representing altitude in a form more relevant in buildings which have
different fl…

CIE1000lldpmedAltitudeType

Textual Convention: CIE1000lldpmedAltitudeType Enumeration

Type Values:

1	meters
2	floors

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.8

cie1000LldpStatusMedRemoteDeviceInfoAltitude

Altitude value in 2s-complement as specified in RFC 3825

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.9

cie1000LldpStatusMedRemoteDeviceInfoDatum

Datum (geodetic system) .

The Map Datum is used for the coordinates given in these options:

WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327,
Prime Meridian Name: Greenw…

CIE1000lldpmedDatumType

Textual Convention: CIE1000lldpmedDatumType Enumeration

Type Values:

1	wgs84
2	nad83navd88
3	nad83mllw

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.10

cie1000LldpStatusMedRemoteDeviceInfoElinaddr

Emergency Call Service ELIN identifier data format is defined to carry
the ELIN identifier as used during emergency call setup to a
traditional CAMA or ISDN trunk-based PSAP. This format consists of a
numerical digit st…

OctetString

Constraints:
range: 0-25

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.11

cie1000LldpStatusMedRemoteDeviceInfoDeviceType

Shows the LLDP neighbor's device type.

CIE1000lldpmedRemoteDeviceType

Textual Convention: CIE1000lldpmedRemoteDeviceType Enumeration

Type Values:

0	notDefined
1	endpointClassI
2	endpointClassII
3	endpointClassIII
4	networkConnectivity
5	reserved

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.12

cie1000LldpStatusMedRemoteDeviceInfoHwRev

Shows the LLDP neighbor's hardware revision.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.13

cie1000LldpStatusMedRemoteDeviceInfoFwRev

Shows the LLDP neighbor's firmware revision.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.14

cie1000LldpStatusMedRemoteDeviceInfoSwRev

Shows the LLDP neighbor's software revision.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.15

cie1000LldpStatusMedRemoteDeviceInfoSerialNo

Shows the LLDP neighbor's serial number.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.16

cie1000LldpStatusMedRemoteDeviceInfoManufacturerName

Shows the LLDP neighbor's manufacturer name.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.17

cie1000LldpStatusMedRemoteDeviceInfoModelName

Shows the LLDP neighbor's model name.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.18

cie1000LldpStatusMedRemoteDeviceInfoAssetId

Shows the LLDP neighbor's asset id.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.19

cie1000LldpStatusMedRemoteDeviceInfoEeeRxTwSys

Shows the LLDP neighbor's Receive tw_sys_rx . Tw_sys_rx is defined as
the time (expressed in microseconds) that the transmitting link partner
will wait before it starts transmitting data after leaving the Low
Power Idle…

CIE1000-TCCIE1000Unsigned16

Textual Convention: CIE1000-TCCIE1000Unsigned16 Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.20

cie1000LldpStatusMedRemoteDeviceInfoEeeTxTwSys

Shows the LLDP neighbor's Transmit Tw_sys_tx . Tw_sys_tx is defined as
the time (expressed in microseconds) that the receiving link partner is
requesting the transmitting link partner to wait before starting the
transmi…

CIE1000-TCCIE1000Unsigned16

Textual Convention: CIE1000-TCCIE1000Unsigned16 Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.21

cie1000LldpStatusMedRemoteDeviceInfoEeeFbTwSys

Shows the LLDP neighbor's Fallback tw_sys_tx. A receiving link partner
may inform the transmitter of an alternate desired Tw_sys_tx. Since a
receiving link partner is likely to have discrete levels for savings,
this pro…

CIE1000-TCCIE1000Unsigned16

Textual Convention: CIE1000-TCCIE1000Unsigned16 Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.22

cie1000LldpStatusMedRemoteDeviceInfoEeeTxTwSysEcho

Shows the LLDP neighbor's echo transmit Tw. The respective echo values
shall be defined as the local link partners reflection (echo) of the
remote link partners respective values. When a local link partner
receives its …

CIE1000-TCCIE1000Unsigned16

Textual Convention: CIE1000-TCCIE1000Unsigned16 Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.23

cie1000LldpStatusMedRemoteDeviceInfoEeeRxTwSysEcho

Shows the LLDP neighbor's echo receive Tw. The respective echo values
shall be defined as the local link partners reflection (echo) of the
remote link partners respective values. When a local link partner
receives its e…

CIE1000-TCCIE1000Unsigned16

Textual Convention: CIE1000-TCCIE1000Unsigned16 Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.24

cie1000LldpStatusMedRemoteDeviceLocInfoTable

table

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2 · 1 row entry · 26 columns

Open in standard view

This is a table to show the LLDP-MED remote device (neighbor) civic
location information for a specific interface.

cie1000LldpStatusMedRemoteDeviceLocInfoEntry entry .1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1

Each interface has a set of neighbors information

Indexes

cie1000LldpStatusMedRemoteDeviceLocInfoIfIndex cie1000LldpStatusMedRemoteDeviceLocInfoLldpmedIndex

Column	Syntax	OID
cie1000LldpStatusMedRemoteDeviceLocInfoIfIndex Logical interface number index.	CIE1000-TCCIE1000InterfaceIndex Textual Convention: CIE1000-TCCIE1000InterfaceIndex `Integer32` Type Constraints: `range: 0..2147483647`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.1`
cie1000LldpStatusMedRemoteDeviceLocInfoLldpmedIndex Neighbor information table entry index.	Integer32 Constraints: `range: 0-192`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.2`
cie1000LldpStatusMedRemoteDeviceLocInfoState National subdivision	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.5`
cie1000LldpStatusMedRemoteDeviceLocInfoCounty County	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.6`
cie1000LldpStatusMedRemoteDeviceLocInfoCity City	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.7`
cie1000LldpStatusMedRemoteDeviceLocInfoDistrict City district	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.8`
cie1000LldpStatusMedRemoteDeviceLocInfoBlock Block (Neighborhood)	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.9`
cie1000LldpStatusMedRemoteDeviceLocInfoStreet Street	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.10`
cie1000LldpStatusMedRemoteDeviceLocInfoLeadingStreetDirection Street Direction	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.11`
cie1000LldpStatusMedRemoteDeviceLocInfoTrailingStreetSuffix Trailing Street Suffix	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.12`
cie1000LldpStatusMedRemoteDeviceLocInfoStreetSuffix Street Suffix	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.13`
cie1000LldpStatusMedRemoteDeviceLocInfoHouseNo House No.	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.14`
cie1000LldpStatusMedRemoteDeviceLocInfoHouseNoSuffix House No. Suffix	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.15`
cie1000LldpStatusMedRemoteDeviceLocInfoLandmark Landmark	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.16`
cie1000LldpStatusMedRemoteDeviceLocInfoAdditionalInfo Additional Location Info	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.17`
cie1000LldpStatusMedRemoteDeviceLocInfoName Name	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.18`
cie1000LldpStatusMedRemoteDeviceLocInfoZipCode Zip code	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.19`
cie1000LldpStatusMedRemoteDeviceLocInfoBuilding Building	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.20`
cie1000LldpStatusMedRemoteDeviceLocInfoApartment Apartment/unit	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.21`
cie1000LldpStatusMedRemoteDeviceLocInfoFloor Floor	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.22`
cie1000LldpStatusMedRemoteDeviceLocInfoRoomNumber Room Number	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.23`
cie1000LldpStatusMedRemoteDeviceLocInfoPlaceType Place type	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.24`
cie1000LldpStatusMedRemoteDeviceLocInfoPostalCommunityName Postal Community Name	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.25`
cie1000LldpStatusMedRemoteDeviceLocInfoPoBox Post Office Box	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.26`
cie1000LldpStatusMedRemoteDeviceLocInfoAdditionalCode Additional Code	OctetString Constraints: `range: 0-250`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.27`
cie1000LldpStatusMedRemoteDeviceLocInfoCountryCode The two-letter ISO 3166 country code in capital ASCII letters - Example: DK, DE or US.	OctetString Constraints: `range: 0-2`	`.1.3.6.1.4.1.9.9.832.1.34.1.3.4.2.1.28`

cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoTable

table

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.3 · 1 row entry · 9 columns

Open in standard view

This is a table to show the LLDP-MED remote device (neighbor) network
policies information for a specific interface.

cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoEntry entry .1.3.6.1.4.1.9.9.832.1.34.1.3.4.3.1

Each interface has a set of neighbors information

Indexes

cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoIfIndex cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedIndex cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedPolicy

Column Syntax OID

cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoIfIndex

Logical interface number index.

CIE1000-TCCIE1000InterfaceIndex

Textual Convention: CIE1000-TCCIE1000InterfaceIndex Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.3.1.1

cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedIndex

Neighbor information table entry index.

Integer32

Constraints:
range: 0-192

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.3.1.2

cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoLldpmedPolicy

Policy index.

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.3.1.3

cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoApplicationType

The LLDP policy application type.

CIE1000lldpmedRemoteNetworkPolicyApplicationType

Textual Convention: CIE1000lldpmedRemoteNetworkPolicyApplicationType Enumeration

Type Values:

1	voice
2	voiceSignaling
3	guestVoice
4	guestVoiceSignaling
5	softphoneVoice
6	videoConferencing
7	streamingVideo
8	videoSignaling

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.3.1.5

cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoUnknownPolicy

Policy indicates that an Endpoint Device wants to explicitly advertise
that the policy is required by the device. Can be either Defined or
Unknown

Unknown: The network policy for the specified application…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.3.1.6

cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoTagged

Defines if LLDP policy uses tagged VLAN.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.3.1.7

cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoVlanId

The policy VLAN ID. Only valid when policy 'Tagged' is TRUE

Unsigned32

Constraints:
range: 1-4095

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.3.1.8

cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoL2Priority

Shows the LLDP neighbor's policy L2 priority.

Unsigned32

Constraints:
range: 0-7

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.3.1.9

cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoDscp

LLDP policy DSCP.

Unsigned32

Constraints:
range: 0-63

.1.3.6.1.4.1.9.9.832.1.34.1.3.4.3.1.10

cie1000LldpControlStatisticsClearTable

table

.1.3.6.1.4.1.9.9.832.1.34.1.4.1.1 · 1 row entry · 2 columns

Open in standard view

This is a table to clear LLDP statistics for a specific interface.

cie1000LldpControlStatisticsClearEntry entry .1.3.6.1.4.1.9.9.832.1.34.1.4.1.1.1

Each interface has a set of statistics counters

Indexes

cie1000LldpControlStatisticsClearIfIndex

Column Syntax OID

cie1000LldpControlStatisticsClearIfIndex

Logical interface number index.

CIE1000-TCCIE1000InterfaceIndex

Textual Convention: CIE1000-TCCIE1000InterfaceIndex Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.9.9.832.1.34.1.4.1.1.1.1

cie1000LldpControlStatisticsClearStatisticsClear

Set to TRUE to clear the LLDP statistics of an interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.832.1.34.1.4.1.1.1.2

CIE1000-LLDP-MIB Table View

cie1000LldpConfigTable

cie1000LldpConfigMedTable

cie1000LldpConfigMedPolicyTable

cie1000LldpConfigMedPolicyListTable

cie1000LldpConfigMedLocationInfTable

cie1000LldpStatusStatisticsTable

cie1000LldpStatusNeighborsInfTable

cie1000LldpStatusNeighborsMgmtInfTable

cie1000LldpStatusMedRemoteDeviceInfoTable

cie1000LldpStatusMedRemoteDeviceLocInfoTable

cie1000LldpStatusMedRemoteDeviceNetworkPolicyInfoTable

cie1000LldpControlStatisticsClearTable