cie1000LldpStatusMedRemoteDeviceInfoDatum
CIE1000-LLDP-MIB ·
.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.10
Object
column
CIE1000lldpmedDatumType
Datum (geodetic system) .
The Map Datum is used for the coordinates given in these options:
WGS84: (Geographical 3D) - World Geodesic System 1984, CRS Code 4327,
Prime Meridian Name: Greenwich.
NAD83/NAVD88: North American Datum 1983, CRS Code 4269, Prime Meridian
Name: Greenwich; The associated vertical datum is the North American
Vertical Datum of 1988 (NAVD88). This datum pair is to be used when
referencing locations on land, not near tidal water(which would use
Datum = NAD83/MLLW).
NAD83/MLLW: North American Datum 1983, CRS Code 4269, Prime Meridian
Name: Greenwich; The associated vertical datum is Mean Lower Low Water
(MLLW). This datum pair is to be used when referencing locations on
water/sea/ocean.
Context
- MIB
- CIE1000-LLDP-MIB
- OID
.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cie1000LldpStatusMedRemoteDeviceInfoEntry
- Table
- cie1000LldpStatusMedRemoteDeviceInfoTable
- Siblings
- 22
Syntax
CIE1000lldpmedDatumType
- Source
- CIE1000lldpmedDatumType
- Base type
Enumeration
Values & Constraints
Type Values
1 | wgs84 |
2 | nad83navd88 |
3 | nad83mllw |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cie1000LldpStatusMedRemoteDeviceInfoIfIndex Logical interface number index. | column | CIE1000-TCCIE1000InterfaceIndex | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.1 |
| cie1000LldpStatusMedRemoteDeviceInfoElinaddr Emergency Call Service ELIN identifier data format is defined to carry
the ELIN identifier as used during emergency call setup to a
traditional CAMA or ISDN trunk-based PSAP. This… | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.11 |
| cie1000LldpStatusMedRemoteDeviceInfoDeviceType Shows the LLDP neighbor's device type. | column | CIE1000lldpmedRemoteDeviceType | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.12 |
| cie1000LldpStatusMedRemoteDeviceInfoHwRev Shows the LLDP neighbor's hardware revision. | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.13 |
| cie1000LldpStatusMedRemoteDeviceInfoFwRev Shows the LLDP neighbor's firmware revision. | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.14 |
| cie1000LldpStatusMedRemoteDeviceInfoSwRev Shows the LLDP neighbor's software revision. | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.15 |
| cie1000LldpStatusMedRemoteDeviceInfoSerialNo Shows the LLDP neighbor's serial number. | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.16 |
| cie1000LldpStatusMedRemoteDeviceInfoManufacturerName Shows the LLDP neighbor's manufacturer name. | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.17 |
| cie1000LldpStatusMedRemoteDeviceInfoModelName Shows the LLDP neighbor's model name. | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.18 |
| cie1000LldpStatusMedRemoteDeviceInfoAssetId Shows the LLDP neighbor's asset id. | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.19 |
| cie1000LldpStatusMedRemoteDeviceInfoLldpmedIndex Neighbor information table entry index. | column | Integer32 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.2 |
| cie1000LldpStatusMedRemoteDeviceInfoEeeRxTwSys Shows the LLDP neighbor's Receive tw_sys_rx . Tw_sys_rx is defined as
the time (expressed in microseconds) that the transmitting link partner
will wait before it starts transmitti… | column | CIE1000-TCCIE1000Unsigned16 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.20 |
| cie1000LldpStatusMedRemoteDeviceInfoEeeTxTwSys Shows the LLDP neighbor's Transmit Tw_sys_tx . Tw_sys_tx is defined as
the time (expressed in microseconds) that the receiving link partner is
requesting the transmitting link par… | column | CIE1000-TCCIE1000Unsigned16 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.21 |
| cie1000LldpStatusMedRemoteDeviceInfoEeeFbTwSys Shows the LLDP neighbor's Fallback tw_sys_tx. A receiving link partner
may inform the transmitter of an alternate desired Tw_sys_tx. Since a
receiving link partner is likely to ha… | column | CIE1000-TCCIE1000Unsigned16 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.22 |
| cie1000LldpStatusMedRemoteDeviceInfoEeeTxTwSysEcho Shows the LLDP neighbor's echo transmit Tw. The respective echo values
shall be defined as the local link partners reflection (echo) of the
remote link partners respective values.… | column | CIE1000-TCCIE1000Unsigned16 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.23 |
| cie1000LldpStatusMedRemoteDeviceInfoEeeRxTwSysEcho Shows the LLDP neighbor's echo receive Tw. The respective echo values
shall be defined as the local link partners reflection (echo) of the
remote link partners respective values. … | column | CIE1000-TCCIE1000Unsigned16 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.24 |
| cie1000LldpStatusMedRemoteDeviceInfoCapabilities LLDP neighbor's capabilities bit mask.
Bit 0 represents LLDP-MED capabilities.
Bit 1 represents Network Policy.
Bit 2 represents Locat… | column | CIE1000-TCCIE1000Unsigned16 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.4 |
| cie1000LldpStatusMedRemoteDeviceInfoCapabilitiesEnabled LLDP neighbor's capabilities bit mask for the capabilities which are
currently enabled.
Bit 0 represents LLDP-MED capabilities.
Bit 1 represents Netw… | column | CIE1000-TCCIE1000Unsigned16 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.5 |
| cie1000LldpStatusMedRemoteDeviceInfoLatitude Latitude degrees in 2s-complement as specified in RFC 3825. Positive
numbers are north of the equator and negative numbers are south of the
equator. | column | CIE1000-TCCIE1000Integer64 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.6 |
| cie1000LldpStatusMedRemoteDeviceInfoLongitude Longitude degrees in 2s-complement as specified in RFC 3825. Positive
values are East of the prime meridian and negative numbers are West of
the prime meridian. | column | CIE1000-TCCIE1000Integer64 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.7 |
| cie1000LldpStatusMedRemoteDeviceInfoAltitudeType Altitude type as either floors or meters. Meters are representing
meters of altitude defined by the vertical datum specified. Floors are
representing altitude in a form more relev… | column | CIE1000lldpmedAltitudeType | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.8 |
| cie1000LldpStatusMedRemoteDeviceInfoAltitude Altitude value in 2s-complement as specified in RFC 3825 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.9 |