cie1000LldpConfigCdpAware

Enables/disables CDP awareness for the interface.
              
CDP is Cisco's equivalent to LLDP.
              
              
              
The CDP operation is restricted to decoding incoming CDP frames (The
switch doesn't transmit CDP frames). CDP frames are only decoded if
LLDP on the port is enabled.
              
              
              
Only CDP TLVs that can be mapped to a corresponding field in the LLDP
neighbors' table are decoded. All other TLVs are discarded
(Unrecognized CDP TLVs and discarded CDP frames are not shown in the
LLDP statistics.).
              
CDP TLVs are mapped onto LLDP neighbors' table as shown below.
              
CDP TLV 'Device ID' is mapped to the LLDP 'Chassis ID' field.
              
CDP TLV 'Address' is mapped to the LLDP 'Management Address' field. The
CDP address TLV can contain multiple addresses, but only the first
address is shown in the LLDP neighbors table.
              
CDP TLV 'Port ID' is mapped to the LLDP 'Port ID' field.
              
CDP TLV 'Version and Platform' is mapped to the LLDP 'System
Description' field.
              
Both the CDP and LLDP support 'system capabilities', but the CDP
capabilities cover capabilities that are not part of the LLDP. These
capabilities are shown as 'others' in the LLDP neighbors' table.
              
              
              
If all ports have CDP awareness disabled the switch forwards CDP frames
received from neighbor devices. If at least one port has CDP awareness
enabled all CDP frames are terminated by the switch.
              
              
              
Note: When CDP awareness on a port is disabled the CDP information
isn't removed immediately, but gets removed when the hold time is
exceeded.

MIB

CIE1000-LLDP-MIB

OID

.1.3.6.1.4.1.9.9.832.1.34.1.2.2.1.4

Type

column

Access

readwrite

Status

current

Parent

cie1000LldpConfigEntry

Table

cie1000LldpConfigTable

Siblings

4