cie1000LldpStatusMedRemoteDeviceInfoAltitudeType
CIE1000-LLDP-MIB ·
.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.8
Object
column
CIE1000lldpmedAltitudeType
Altitude type as either floors or meters. Meters are representing meters of altitude defined by the vertical datum specified. Floors are representing altitude in a form more relevant in buildings which have different floor-to-floor dimensions. An altitude = 0.0 is meaningful even outside a building, and represents ground level at the given latitude and longitude. Inside a building, 0.0 represents the floor level associated with ground level at the main entrance.
Context
- MIB
- CIE1000-LLDP-MIB
- OID
.1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cie1000LldpStatusMedRemoteDeviceInfoEntry
- Table
- cie1000LldpStatusMedRemoteDeviceInfoTable
- Siblings
- 22
Syntax
CIE1000lldpmedAltitudeType
- Source
- CIE1000lldpmedAltitudeType
- Base type
Enumeration
Values & Constraints
Type Values
1 | meters |
2 | floors |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cie1000LldpStatusMedRemoteDeviceInfoIfIndex Logical interface number index. | column | CIE1000-TCCIE1000InterfaceIndex | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.1 |
| cie1000LldpStatusMedRemoteDeviceInfoDatum Datum (geodetic system) .
The Map Datum is used for the coordinates given in these options:
WGS84: (Geographical 3D) - World Geodesic System 1984, CR… | column | CIE1000lldpmedDatumType | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.10 |
| cie1000LldpStatusMedRemoteDeviceInfoElinaddr Emergency Call Service ELIN identifier data format is defined to carry
the ELIN identifier as used during emergency call setup to a
traditional CAMA or ISDN trunk-based PSAP. This… | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.11 |
| cie1000LldpStatusMedRemoteDeviceInfoDeviceType Shows the LLDP neighbor's device type. | column | CIE1000lldpmedRemoteDeviceType | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.12 |
| cie1000LldpStatusMedRemoteDeviceInfoHwRev Shows the LLDP neighbor's hardware revision. | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.13 |
| cie1000LldpStatusMedRemoteDeviceInfoFwRev Shows the LLDP neighbor's firmware revision. | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.14 |
| cie1000LldpStatusMedRemoteDeviceInfoSwRev Shows the LLDP neighbor's software revision. | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.15 |
| cie1000LldpStatusMedRemoteDeviceInfoSerialNo Shows the LLDP neighbor's serial number. | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.16 |
| cie1000LldpStatusMedRemoteDeviceInfoManufacturerName Shows the LLDP neighbor's manufacturer name. | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.17 |
| cie1000LldpStatusMedRemoteDeviceInfoModelName Shows the LLDP neighbor's model name. | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.18 |
| cie1000LldpStatusMedRemoteDeviceInfoAssetId Shows the LLDP neighbor's asset id. | column | OctetString | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.19 |
| cie1000LldpStatusMedRemoteDeviceInfoLldpmedIndex Neighbor information table entry index. | column | Integer32 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.2 |
| cie1000LldpStatusMedRemoteDeviceInfoEeeRxTwSys Shows the LLDP neighbor's Receive tw_sys_rx . Tw_sys_rx is defined as
the time (expressed in microseconds) that the transmitting link partner
will wait before it starts transmitti… | column | CIE1000-TCCIE1000Unsigned16 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.20 |
| cie1000LldpStatusMedRemoteDeviceInfoEeeTxTwSys Shows the LLDP neighbor's Transmit Tw_sys_tx . Tw_sys_tx is defined as
the time (expressed in microseconds) that the receiving link partner is
requesting the transmitting link par… | column | CIE1000-TCCIE1000Unsigned16 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.21 |
| cie1000LldpStatusMedRemoteDeviceInfoEeeFbTwSys Shows the LLDP neighbor's Fallback tw_sys_tx. A receiving link partner
may inform the transmitter of an alternate desired Tw_sys_tx. Since a
receiving link partner is likely to ha… | column | CIE1000-TCCIE1000Unsigned16 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.22 |
| cie1000LldpStatusMedRemoteDeviceInfoEeeTxTwSysEcho Shows the LLDP neighbor's echo transmit Tw. The respective echo values
shall be defined as the local link partners reflection (echo) of the
remote link partners respective values.… | column | CIE1000-TCCIE1000Unsigned16 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.23 |
| cie1000LldpStatusMedRemoteDeviceInfoEeeRxTwSysEcho Shows the LLDP neighbor's echo receive Tw. The respective echo values
shall be defined as the local link partners reflection (echo) of the
remote link partners respective values. … | column | CIE1000-TCCIE1000Unsigned16 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.24 |
| cie1000LldpStatusMedRemoteDeviceInfoCapabilities LLDP neighbor's capabilities bit mask.
Bit 0 represents LLDP-MED capabilities.
Bit 1 represents Network Policy.
Bit 2 represents Locat… | column | CIE1000-TCCIE1000Unsigned16 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.4 |
| cie1000LldpStatusMedRemoteDeviceInfoCapabilitiesEnabled LLDP neighbor's capabilities bit mask for the capabilities which are
currently enabled.
Bit 0 represents LLDP-MED capabilities.
Bit 1 represents Netw… | column | CIE1000-TCCIE1000Unsigned16 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.5 |
| cie1000LldpStatusMedRemoteDeviceInfoLatitude Latitude degrees in 2s-complement as specified in RFC 3825. Positive
numbers are north of the equator and negative numbers are south of the
equator. | column | CIE1000-TCCIE1000Integer64 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.6 |
| cie1000LldpStatusMedRemoteDeviceInfoLongitude Longitude degrees in 2s-complement as specified in RFC 3825. Positive
values are East of the prime meridian and negative numbers are West of
the prime meridian. | column | CIE1000-TCCIE1000Integer64 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.7 |
| cie1000LldpStatusMedRemoteDeviceInfoAltitude Altitude value in 2s-complement as specified in RFC 3825 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.832.1.34.1.3.4.1.1.9 |