CADANT-CMTS-POLICY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

124

cadScmAccessTable

table

.1.3.6.1.4.1.4998.1.1.35.1.1 · 1 row entry · 3 columns

Open in standard view

A table contains SCM access control list information.
Each physical interface is associated with the access list number defined
as hjpolAccListNumber in hjpolAccListTable of NETPLANE-POLICY-MIB. With
this information, C4 can permit/deny access usnig access list filtering before
the packet reach SCM from the specified physical interface.

cadScmAccessEntry entry .1.3.6.1.4.1.4998.1.1.35.1.1.1

A conceptual row containing information about SCM access list
for each physical interface.

Indexes

cadScmAccIfIndex

Column Syntax OID

cadScmAccIfIndex

The value of this object identifies a physical layer2 interface, such as
a DOCSIS MAC or a Gigabit/TenGigabit NAM, on which SCM access control is applied

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.1.1.1

cadScmAccListNumber

The value of this object identifies entry(or entries) in the
hjpolAccListTable. The identified entry(or entries)
contains SCM access parameters to be used when filtering
traffic from individual interface sent to SCM.

Integer32r/w

Constraints:
range: 1-99

.1.3.6.1.4.1.4998.1.1.35.1.1.1.2

cadScmAccRowStatus

Control Object for row creation and deletion.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4998.1.1.35.1.1.1.3

cadDistListInTable

table

.1.3.6.1.4.1.4998.1.1.35.1.2 · 1 row entry · 6 columns

Open in standard view

Distribute List In Table

cadDistListInEntry entry .1.3.6.1.4.1.4998.1.1.35.1.2.1

A row in Distribute List In table

Indexes

cadDistListInProtocol cadDistListInProtocolProcess cadDistListInIfIndex cadDistListInAccessListNum

Column Syntax OID

cadDistListInProtocol

Protocol for which distribute list is applied.

CadPolicyProtocol

Textual Convention: CadPolicyProtocol Enumeration

Type Values:

1	other
2	local
3	netmgmt
4	icmp
5	egp
6	ggp
7	hello
8	rip
9	isIs
10	esIs
11	ciscoIgrp
12	bbnSpfIgp
13	ospf
14	bgp
15	idpr
16	ciscoEigrp

.1.3.6.1.4.1.4998.1.1.35.1.2.1.1

cadDistListInProtocolProcess

VRF for which distribute list is applied.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.4998.1.1.35.1.2.1.2

cadDistListInIfIndex

Interface for which distribute list is applied. The value will be 1
if the distribute list is applied to all interfaces.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.2.1.3

cadDistListInAccessListNum

The configured distribute in list refers to the access list specified.

Integer32

Constraints:
range: 1-99

.1.3.6.1.4.1.4998.1.1.35.1.2.1.4

cadDistListInAccessListName

Name of the access list referred by distribute in list.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.4998.1.1.35.1.2.1.5

cadDistListInStatus

The row status variable, used according to row installation and
removal conventions. Once access list specified default row status
is active.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4998.1.1.35.1.2.1.6

cadPolicyRateLimitTable

table

.1.3.6.1.4.1.4998.1.1.35.1.4 · 1 row entry · 14 columns

Open in standard view

A table of rate limiting policies applied to a physical interface.

cadPolicyRateLimitEntry entry .1.3.6.1.4.1.4998.1.1.35.1.4.1

An ordered list of the rate limit polices

Indexes

cadPolicyRateLimitIfIndex cadPolicyRateLimitDirection cadPolicyRateLimitIndex

Column Syntax OID

cadPolicyRateLimitIfIndex

The value of this object identifies a physical layer2 interface, such as
a DOCSIS MAC or a Gigabit/TenGigabit NAM, on which the rate limit policy is applied

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.4.1.1

cadPolicyRateLimitDirection

Direction of traffic on interface to apply the
rate limit policy

CADANT-TCCadIfDirection

Textual Convention: CADANT-TCCadIfDirection Enumeration

Type Values:

1	in
2	out

.1.3.6.1.4.1.4998.1.1.35.1.4.1.2

cadPolicyRateLimitIndex

Index of rate limit policy. Policies are applied
in the order specified by this index value

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.4998.1.1.35.1.4.1.3

cadPolicyRateLimitStatus

Create and delete table row entries.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4998.1.1.35.1.4.1.4

cadPolicyRateLimitAclType

Type of ACL associated with rate limit policy

CADANT-TCCadAclTyper/w

Textual Convention: CADANT-TCCadAclType Enumeration

Type Values:

0	none
1	std-access-list
2	ext-access-list
3	rate-limit-access-list
4	remark
5	ipv6-access-list

.1.3.6.1.4.1.4998.1.1.35.1.4.1.5

cadPolicyRateLimitAclNum

ACL number. If the ACL does not exist, then this
is treated as if the ACL type is none, i.e. all
IP traffic matches the policy.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.4.1.6

cadPolicyRateLimitBps

Average rate, in bits per second (bps).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.4.1.7

cadPolicyRateLimitBurstNormal

Normal burst size, in bytes.
The minimum value is bps divided by 2000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.4.1.8

cadPolicyRateLimitBurstMax

Excess burst size, in bytes. Must be equal
to or larger than cadPolicyRateLimitBurstNormal

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.4.1.9

cadPolicyRateLimitConformAction

Action to take on packets that conform to the specified rate limit.

CadPolicyRateLimitActionr/w

Textual Convention: CadPolicyRateLimitAction Enumeration

Type Values:

1	transmit
2	drop
3	set-prec-transmit
4	set-dscp-transmit
5	set-priority-transmit

.1.3.6.1.4.1.4998.1.1.35.1.4.1.10

cadPolicyRateLimitConformValue

Value to set if action is set-prec-transmit,
set-dscp-transmit or set-priority-transmit. For
set-priority-transmit,the valid value range is 0-7.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.4998.1.1.35.1.4.1.11

cadPolicyRateLimitExceedAction

Action to take on packets that exceed to the specified rate limit.

CadPolicyRateLimitActionr/w

Textual Convention: CadPolicyRateLimitAction Enumeration

Type Values:

1	transmit
2	drop
3	set-prec-transmit
4	set-dscp-transmit
5	set-priority-transmit

.1.3.6.1.4.1.4998.1.1.35.1.4.1.12

cadPolicyRateLimitExceedValue

Value to set if action is set-prec-transmit,
set-dscp-transmit or set-priority-transmit. For
set-priority-transmit,the valid value range is 0-7.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.4998.1.1.35.1.4.1.13

cadPolicyRateLimitClearCounts

If set to true, clear the counts in the CadPolicyRateLimitStatusEntry.
When read, this field always returns false. The correct way to clear
the counts is to first read them, then set ClearCounts to true.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4998.1.1.35.1.4.1.14

cadPolicyRateLimitStatusTable

table

.1.3.6.1.4.1.4998.1.1.35.1.5 · 1 row entry · 6 columns

Open in standard view

A table of counts of rate limiting policies
applied to a physical interface.

cadPolicyRateLimitStatusEntry entry .1.3.6.1.4.1.4998.1.1.35.1.5.1

Dyanmic status associated with a rate limit policy

Indexes

No indexes recorded

Column	Syntax	OID
cadPolicyRateLimitConformPackets Number of packets conforming to the policy rate	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4998.1.1.35.1.5.1.1`
cadPolicyRateLimitConformBytes Number of bytes conforming to the policy rate	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4998.1.1.35.1.5.1.2`
cadPolicyRateLimitExceedPackets Number of packets exceeding to the policy rate	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4998.1.1.35.1.5.1.3`
cadPolicyRateLimitExceedBytes Number of bytes exceeding to the policy rate	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4998.1.1.35.1.5.1.4`
cadPolicyRateLimitCurrentBurst The current number of bytes in the burst exceeding the average bps rate	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4998.1.1.35.1.5.1.5`
cadPolicyRateLimitLastCleared The value of SysUptime when the rate limit counters were last cleared.	SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp `Unsigned32`	`.1.3.6.1.4.1.4998.1.1.35.1.5.1.6`

cadPolicyAclTable

table

.1.3.6.1.4.1.4998.1.1.35.1.6 · 1 row entry · 26 columns

Open in standard view

A table contains access control list (ACL) information. 
Each row corresponds to an access control entry (ACE),
and each ACL may have multiple ACEs that are applied
in order to the packet being inspected.

cadPolicyAclEntry entry .1.3.6.1.4.1.4998.1.1.35.1.6.1

A conceptual row containing information about SCM access list
for each physical interface.

Indexes

cadAclNumber cadAclIndex

Column Syntax OID

cadAclNumber

IPv6 ACL number. IPv6 ACLs are in the range 200-399.
Extended ACL number. Extended ACLs are in the range 100-199.
Standard ACLs are in the range 1-99.

Integer32

Constraints:
range: 1-399

.1.3.6.1.4.1.4998.1.1.35.1.6.1.1

cadAclIndex

Order in which this ACE is used in the ACL.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.4998.1.1.35.1.6.1.2

cadAclType

Indicates whether this EACE is used as a standard,
extended, or remark ACL. The rate-limiting type is
not valid for this table. Remark is the only valid
type that can be set, standard and extended are set
by the age…

CADANT-TCCadAclTyper/w

Textual Convention: CADANT-TCCadAclType Enumeration

Type Values:

0	none
1	std-access-list
2	ext-access-list
3	rate-limit-access-list
4	remark
5	ipv6-access-list

.1.3.6.1.4.1.4998.1.1.35.1.6.1.3

cadAclStatus

RowStatus used to add and remove ACEs. ACEs that contain
only remarks should have their status set to notInService
and should be created with createAndWait.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4998.1.1.35.1.6.1.4

cadAclPermit

Permit or Deny the packet when matched.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4998.1.1.35.1.6.1.5

cadAclProtocol

Protocol number to match

CADANT-TCCadProtocolTyper/w

Textual Convention: CADANT-TCCadProtocolType Integer32

Type Constraints:
range: -1..255

.1.3.6.1.4.1.4998.1.1.35.1.6.1.6

cadAclSrcIp

Source IP address to match

CADANT-TCInetAddressIPv4or6r/w

Textual Convention: CADANT-TCInetAddressIPv4or6 OctetString

Type Constraints:
range: 0
range: 4
range: 8
range: 16
range: 20

.1.3.6.1.4.1.4998.1.1.35.1.6.1.7

cadAclSrcIpMask

Source IP wildcard mask to match. Default to match anything

CADANT-TCInetAddressIPv4or6r/w

Textual Convention: CADANT-TCInetAddressIPv4or6 OctetString

Type Constraints:
range: 0
range: 4
range: 8
range: 16
range: 20

.1.3.6.1.4.1.4998.1.1.35.1.6.1.8

cadAclSrcPortOp

Source port condition (lt,gt,eq,ne) to match.

CADANT-TCCadExtAclConditionr/w

Textual Convention: CADANT-TCCadExtAclCondition Enumeration

Type Values:

0	na
1	eq
2	ne
3	lt
4	le
5	gt
6	ge
7	range

.1.3.6.1.4.1.4998.1.1.35.1.6.1.9

cadAclSrcPortLo

First Source port number to match. -1 indicates that this
field is not used.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.6.1.10

cadAclSrcPortHi

Second Source port number to match. -1 indicates that this
field is not used.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.6.1.11

cadAclDstIp

Destination IP address to match

CADANT-TCInetAddressIPv4or6r/w

Textual Convention: CADANT-TCInetAddressIPv4or6 OctetString

Type Constraints:
range: 0
range: 4
range: 8
range: 16
range: 20

.1.3.6.1.4.1.4998.1.1.35.1.6.1.12

cadAclDstIpMask

Destination IP wildcard (inverse) mask to match.
Default to match anything.

CADANT-TCInetAddressIPv4or6r/w

Textual Convention: CADANT-TCInetAddressIPv4or6 OctetString

Type Constraints:
range: 0
range: 4
range: 8
range: 16
range: 20

.1.3.6.1.4.1.4998.1.1.35.1.6.1.13

cadAclDstPortOp

Destination port condition (lt,gt,eq,ne) to match.

CADANT-TCCadExtAclConditionr/w

Textual Convention: CADANT-TCCadExtAclCondition Enumeration

Type Values:

0	na
1	eq
2	ne
3	lt
4	le
5	gt
6	ge
7	range

.1.3.6.1.4.1.4998.1.1.35.1.6.1.14

cadAclDstPortLo

First Destination port number to match. -1 indicates that
this field is not used.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.6.1.15

cadAclDstPortHi

Second Destination port number to match. -1 indicates that
this field is not used

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.6.1.16

cadAclLogging

Turn on or off the ACE matching log

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4998.1.1.35.1.6.1.17

cadAclProtoType

Sub-protocol qualifiers. For protocol type ICMP, this value
matches the ICMP message type (0 - 255). For IGMP, this
value matches the IGMP message type (0-15). A value of -1
means that this field is not used.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.6.1.18

cadAclProtoCode

Sub-protocol qualifiers. For protocol type ICMP, this value
matches the ICMP message type code (0 - 255). A value of -1
indicates this value is not used.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.6.1.19

cadAclIpTos

Matches the TOS field of the IP header.

CADANT-TCCadIpTosr/w

Textual Convention: CADANT-TCCadIpTos Integer32

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4998.1.1.35.1.6.1.20

cadAclIpTosMask

Mask to apply to the IpTos object when finding a mactch
on the TOS field of the IP header. A value of 0 is used
to indicate that the TOS is not used.

CADANT-TCCadIpTosMaskr/w

Textual Convention: CADANT-TCCadIpTosMask Integer32

Type Constraints:
range: 0
range: 30
range: 224
range: 254..255

.1.3.6.1.4.1.4998.1.1.35.1.6.1.21

cadAclTcpFlags

Matches the flags field of the TCP header.

CADANT-TCCadTcpFlagsr/w

Textual Convention: CADANT-TCCadTcpFlags Bits

Type Values:

0	urg
1	ack
2	push
3	rst
4	syn
5	fin

.1.3.6.1.4.1.4998.1.1.35.1.6.1.22

cadAclTcpFlagsMask

Mask to apply to the TcpFlags object when finding a mactch
on the flags field of the TCP header.

CADANT-TCCadTcpFlagsr/w

Textual Convention: CADANT-TCCadTcpFlags Bits

Type Values:

0	urg
1	ack
2	push
3	rst
4	syn
5	fin

.1.3.6.1.4.1.4998.1.1.35.1.6.1.23

cadAclFragments

Indicates whether this EACE applies to noninitial fragments
of packets. The default is disabled.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4998.1.1.35.1.6.1.24

cadAclRemark

The comment associated with the access control entry.
This is only valid for ACEs of type remark.

CADANT-TCCadAclStringr/w

Textual Convention: CADANT-TCCadAclString OctetString

Type Constraints:
range: 0..32

.1.3.6.1.4.1.4998.1.1.35.1.6.1.26

cadAclIpAddrType

IP Address type

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.4998.1.1.35.1.6.1.27

cadSnmpCommAccessTable

table

.1.3.6.1.4.1.4998.1.1.35.1.7 · 1 row entry · 3 columns

Open in standard view

A table contains the access list information associated with the
community string. Each community string defined in snmpCommunithTable
can be configured with one access list number. C4 can permit/deny access
usnig access list filtering. Filtering will occur in software, after
the SNMP traffic passed through the OSE protocol stack and received by
the agent. Standard ACLs will be used to enforce the access restrictions

cadSnmpCommAccessEntry entry .1.3.6.1.4.1.4998.1.1.35.1.7.1

A conceptual row containing information about access list filtering
associated with community string.

Indexes

cadSnmpCommAccessName

Column Syntax OID

cadSnmpCommAccessName

The index value that uniquely identifies an entry in snmpCommunityTable.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.4998.1.1.35.1.7.1.1

cadSnmpCommAccessList

The value of this object identifies entry (or entries) in the
cadPolicyAclTable. The identified entry (or entries) contains
access parameters to be used when filtering traffic sent to SNMP agent.

Integer32r/w

Constraints:
range: 1-99

.1.3.6.1.4.1.4998.1.1.35.1.7.1.2

cadSnmpCommAccessStatus

Control Object for row creation and deletion.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4998.1.1.35.1.7.1.3

cadPolicyAccessGroupTable

table

.1.3.6.1.4.1.4998.1.1.35.1.8 · 1 row entry · 7 columns

Open in standard view

A table of access group policies applied to a physical interface.

cadPolicyAccessGroupEntry entry .1.3.6.1.4.1.4998.1.1.35.1.8.1

An ordered list of the access group polices

Indexes

cadPolicyAccessGroupIfIndex cadPolicyAccessGroupDirection

Column Syntax OID

cadPolicyAccessGroupIfIndex

The value of this object identifies a physical layer2 interface, such as
a DOCSIS MAC or a Gigabit/TenGigabit NAM, on which the access group policy is applied

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.8.1.1

cadPolicyAccessGroupDirection

Direction of traffic on interface to apply the access
group policy

CADANT-TCCadIfDirection

Textual Convention: CADANT-TCCadIfDirection Enumeration

Type Values:

1	in
2	out

.1.3.6.1.4.1.4998.1.1.35.1.8.1.2

cadPolicyAccessGroupStatus

This table supports sets of createAndGo(4) and destroy(6)

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4998.1.1.35.1.8.1.3

cadPolicyAccessGroupIpv4AclNum

ACL number. If the ACL does not exist, then this
is treated as if the ACL type is none, i.e. all
IPv4 traffic matches the policy.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.8.1.4

cadPolicyAccessGroupClearCounts

If set to true, clear the counts in the CadPolicyAccessGroupStatusEntry.
When read, this field always returns false. The correct way to clear
the counts is to first read them, then set ClearCounts to true.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4998.1.1.35.1.8.1.5

cadPolicyAccessGroupIpv6AclNum

ACL number. If the ACL does not exist, then this
is treated as if the ACL type is none, i.e. all
IPv6 traffic matches the policy.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.8.1.6

cadPolicyAccessGroupIpv6AclName

ACL name.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.4998.1.1.35.1.8.1.7

cadPolicyAccessGroupStatusTable

table

.1.3.6.1.4.1.4998.1.1.35.1.9 · 1 row entry · 3 columns

Open in standard view

A table of counts of rate limiting policies
applied to a physical interface.

cadPolicyAccessGroupStatusEntry entry .1.3.6.1.4.1.4998.1.1.35.1.9.1

Dyanmic status associated with a rate limit policy

Indexes

No indexes recorded

Column	Syntax	OID
cadPolicyAccessGroupPermitPackets Number of packets conforming to the access group policy permit ACL	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4998.1.1.35.1.9.1.1`
cadPolicyAccessGroupDenyPackets Number of packets conforming to the access group policy deny ACL	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4998.1.1.35.1.9.1.2`
cadPolicyAccessGroupLastCleared The value of SysUptime when the access group policy counters were last cleared.	SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp `Unsigned32`	`.1.3.6.1.4.1.4998.1.1.35.1.9.1.3`

cadPolicyPfxListTable

table

.1.3.6.1.4.1.4998.1.1.35.1.11 · 1 row entry · 11 columns

Open in standard view

Prefix List Table

cadPolicyPfxListEntry entry .1.3.6.1.4.1.4998.1.1.35.1.11.1

A row in Prefix list table

Indexes

cadPolicyPfxListNumber cadPolicyPfxListName cadPolicyPfxListSeqNumber cadPolicyPfxListAfi cadPolicyPfxListSafi cadPolicyPfxListIpAddress cadPolicyPfxListIpAddMaskLen cadPolicyPfxListMaskGeValue cadPolicyPfxListMaskLeValue

Column Syntax OID

cadPolicyPfxListNumber

Prefix list is identified by number
value of 0 should be passed for this object if prefix list
is configured by name

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.4998.1.1.35.1.11.1.1

cadPolicyPfxListName

Name of prefix list.Null value is assigned to this
Object if the prefix list is identified by number

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.4998.1.1.35.1.11.1.2

cadPolicyPfxListSeqNumber

A sequence in the prefix list is identified by sequence number.
If no sequence is specified defalut sequence of 5 is assumend. IF
one more sequence is configured sequence number 10 is assigned
(multiples of 5)

Integer32

Constraints:
range: 5-2147483645

.1.3.6.1.4.1.4998.1.1.35.1.11.1.3

cadPolicyPfxListIpAddress

This is the source ipv4 or ipv6 address on which the
filtering needs to be applied

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4998.1.1.35.1.11.1.4

cadPolicyPfxListIpAddMaskLen

Mask length of the Source IP address

Integer32

Constraints:
range: 0-32

.1.3.6.1.4.1.4998.1.1.35.1.11.1.5

cadPolicyPfxListMaskGeValue

If the received route matches the source address
and the mask length is greater than the value specified,
apply the specified action to the route

Integer32

Constraints:
range: 0-32

.1.3.6.1.4.1.4998.1.1.35.1.11.1.6

cadPolicyPfxListMaskLeValue

This value specifies if the received route mask length is less
the value specified here do the action specified (permit/deny)

Integer32

Constraints:
range: 0-32

.1.3.6.1.4.1.4998.1.1.35.1.11.1.7

cadPolicyPfxListAction

specifies the action to be taken. Possible actions
include permit(1) and deny(2)

CadPolicyActionr/w

Textual Convention: CadPolicyAction Integer32

Type Constraints:
range: 1..2

.1.3.6.1.4.1.4998.1.1.35.1.11.1.8

cadPolicyPfxListStatus

The row status variable, used according to
row installation and removal conventions.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4998.1.1.35.1.11.1.9

cadPolicyPfxListAfi

This is the Address Family Identifier (AFI) of the prefix
that will follow. Only IPv4 or IPv6 prefix-list will be supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.4998.1.1.35.1.11.1.10

cadPolicyPfxListSafi

This is the Subsequent Address Family Identifier (SAFI)
of the prefix that will follow.

Enumeration

Enumerated Values:

1	unicast
2	multicast
3	both
128	mplsBgpVpn

.1.3.6.1.4.1.4998.1.1.35.1.11.1.11

cadPolicyDistListOutTable

table

.1.3.6.1.4.1.4998.1.1.35.1.12 · 1 row entry · 9 columns

Open in standard view

Distribute List Out Table

cadPolicyDistListOutEntry entry .1.3.6.1.4.1.4998.1.1.35.1.12.1

A row in Distribute List Out table

Indexes

cadPolicyDistListOutSrcProtocol cadPolicyDistListOutSrcProtocolProcess cadPolicyDistListOutRoutingProtocol cadPolicyDistListOutRoutingProcess cadPolicyDistListOutAutonomousSystemNum cadPolicyDistListOutIfIndex cadPolicyDistListOutAccessListNum

Column Syntax OID

cadPolicyDistListOutSrcProtocol

Source Protocol under which distribute list is configured.

CadPolicyProtocol

Textual Convention: CadPolicyProtocol Enumeration

Type Values:

1	other
2	local
3	netmgmt
4	icmp
5	egp
6	ggp
7	hello
8	rip
9	isIs
10	esIs
11	ciscoIgrp
12	bbnSpfIgp
13	ospf
14	bgp
15	idpr
16	ciscoEigrp

.1.3.6.1.4.1.4998.1.1.35.1.12.1.1

cadPolicyDistListOutSrcProtocolProcess

Source VRF ID under which distribute list is configured.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.4998.1.1.35.1.12.1.2

cadPolicyDistListOutRoutingProtocol

Destination Protocol to which routes need to be sent.

CadPolicyProtocol

Textual Convention: CadPolicyProtocol Enumeration

Type Values:

1	other
2	local
3	netmgmt
4	icmp
5	egp
6	ggp
7	hello
8	rip
9	isIs
10	esIs
11	ciscoIgrp
12	bbnSpfIgp
13	ospf
14	bgp
15	idpr
16	ciscoEigrp

.1.3.6.1.4.1.4998.1.1.35.1.12.1.3

cadPolicyDistListOutRoutingProcess

Destination VRF ID under which distribute list is configured.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.4998.1.1.35.1.12.1.4

cadPolicyDistListOutAutonomousSystemNum

Autonomous system number of BGP to which routes need to be
redistributed. If destination protocol is BGP appropriate AS
number needs to be filled for this object. Otherwise set a
value of 1 for this object.

Integer32

Constraints:
range: -1-2147483647

.1.3.6.1.4.1.4998.1.1.35.1.12.1.5

cadPolicyDistListOutAccessListNum

The configured distribute out list refers to the access list
specified. The access list number must be in the range of 1 - 99

Integer32

Constraints:
range: 1-99

.1.3.6.1.4.1.4998.1.1.35.1.12.1.6

cadPolicyDistListOutAccessListName

Name of the access list referred by distribute list. The
access list name must be less than 32 characters

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.4998.1.1.35.1.12.1.7

cadPolicyDistListOutStatus

The row status variable, used according to row installation and
removal conventions. Once access list specified default row status
is UP.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4998.1.1.35.1.12.1.8

cadPolicyDistListOutIfIndex

Interface for which distribute list is applied. The value will be 1
if the distribute list is applied to all interfaces.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.4998.1.1.35.1.12.1.9

cadDistListOutTable

table

.1.3.6.1.4.1.4998.1.1.35.1.13 · 1 row entry · 6 columns

Open in standard view

Distribute List Out Table

cadDistListOutEntry entry .1.3.6.1.4.1.4998.1.1.35.1.13.1

A row in Distribute List Out table

Indexes

cadDistListOutVrIndex cadDistListOutDestProtocol cadDistListOutSrcProtocol

Column Syntax OID

cadDistListOutVrIndex

virtual router index

Integer32

Constraints:
range: 1-99

.1.3.6.1.4.1.4998.1.1.35.1.13.1.1

cadDistListOutDestProtocol

Destination protocol for which distribute list is applied.

.1.3.6.1.4.1.4998.1.1.35.1.13.1.2

cadDistListOutSrcProtocol

Source protocol for which distribute list is applied.

.1.3.6.1.4.1.4998.1.1.35.1.13.1.3

cadDistListOutAccessListNum

Access List Number

Integer32r/w

Constraints:
range: 0-999

.1.3.6.1.4.1.4998.1.1.35.1.13.1.4

cadDistListOutStatus

The row status variable, used according to row installation and
removal conventions. Once access list specified default row status
is active.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4998.1.1.35.1.13.1.5

cadDistListOutAccessListName

Access List Name

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.4998.1.1.35.1.13.1.6

cadAclNameTable

table

.1.3.6.1.4.1.4998.1.1.35.1.14 · 1 row entry · 3 columns

Open in standard view

This table maps names to ACL entries.
Each row associates a name with the indexed ACL.

cadAclNameEntry entry .1.3.6.1.4.1.4998.1.1.35.1.14.1

A conceptual row containing name information about an ACL.

Indexes

cadNameAclName cadNameAclNumber

Column Syntax OID

cadNameAclName

The name of the access control list.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.4998.1.1.35.1.14.1.1

cadNameAclNumber

Extended ACL number. Extended ACLs are in the range 100-199.
Standard ACLs are in the range 1-99.

Integer32

Constraints:
range: 1-399

.1.3.6.1.4.1.4998.1.1.35.1.14.1.2

cadNameAclStatus

RowStatus used to add and remove names for ACLs. When an ACL
is removed, the associated name is also removed.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4998.1.1.35.1.14.1.3

cadPolicyAclExtTable

table

.1.3.6.1.4.1.4998.1.1.35.1.16 · 1 row entry · 1 columns

Open in standard view

The cadPolicyAclExtTable augments the cadPolicyAclTable with
a count for total number of times the access list
entry has been matched by all referencing applications.

cadPolicyAclExtEntry entry .1.3.6.1.4.1.4998.1.1.35.1.16.1

Information about the policy access list entry.

Indexes

No indexes recorded

Column	Syntax	OID
cadAclEntryCount Total number of times the access list entry has been matched by all referencing applications.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4998.1.1.35.1.16.1.1`

cadRouteMapTagTable

table

.1.3.6.1.4.1.4998.1.1.35.1.30.1 · 1 row entry · 3 columns

Open in standard view

This table maps policy route map names to route map entries.
Each row associates a name with the indexed policy route map.

cadRouteMapTagEntry entry .1.3.6.1.4.1.4998.1.1.35.1.30.1.1

A conceptual row containing name information for a policy route map.

Indexes

cadRouteMapTagName

Column Syntax OID

cadRouteMapTagName

Name to used for this policy route map

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.4998.1.1.35.1.30.1.1.1

cadRouteMapTagId

Id used to associate entries in the policy route map table to this name.

Integer32r/w

Constraints:
range: 1-64

.1.3.6.1.4.1.4998.1.1.35.1.30.1.1.2

cadRouteMapTagRowStatus

The row status variable used according to row installation
and removal convention. In our case, we have simplified this
to the usage of only the following states - active, createAndGo,
and destroy. Other three states no…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4998.1.1.35.1.30.1.1.3

cadRouteMapTable

table

.1.3.6.1.4.1.4998.1.1.35.1.30.2 · 1 row entry · 19 columns

Open in standard view

This table contains policy route map data where each row
contains information about the ACL being used and what
set operations should be applied to the IP packet on a match.

cadRouteMapEntry entry .1.3.6.1.4.1.4998.1.1.35.1.30.2.1

A conceptual row containing information for a policy route map entry.

Indexes

cadRouteMapId cadRouteMapSeqNum

Column Syntax OID

cadRouteMapId

Id used to associate entries in the policy route map table.

Integer32

Constraints:
range: 1-64

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.1

cadRouteMapSeqNum

Sequence number used to order the match statements.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.2

cadRouteMapMatchType

Type of match to used for this entry. Permit matches
on the provided ACL and then applies the defined set operations
before destination routing. Deny matches on the provided
ACL and then directly routes to the destina…

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.3

cadRouteMapMatchAcl

ACL used to match the incoming packet. Since IPv4 is the only supported
address type, the ACL number must be an extended or standard ACL. A value 0
implies that no ACL is used and all packets will match this entry.

Integer32r/w

Constraints:
range: 0-199

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.4

cadRouteMapSetIpPrec

Indicates whether the IP Precedence should be changed on the packet
if it matches the ACL and this is a permit type of match.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.5

cadRouteMapIpPrec

The IP precedence value that should be used to replace the
existing IP precedence of the matching packet.

Enumerationr/w

Enumerated Values:

0	routine
1	priority
2	immediate
3	flash
4	flash-override
5	critical
6	internet
7	network

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.6

cadRouteMapSetIpTos

Indicates whether the IP TOS should be changed on the packet
if it matches the ACL and this is a permit type of match.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.7

cadRouteMapIpTos

The IP TOS value that should be used to replace the
existing IP TOS of the matching packet.

Enumerationr/w

Enumerated Values:

0	normal
1	min-monetary-cost
2	max-reliability
4	max-throughput
8	min-delay

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.8

cadRouteMapSetNextHop

Indicates whether the next hop setting should be used to specify
the adjacent next hop router when forwarding the matching packet.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.9

cadRouteMapNextHopAddrType

The address type of the next hop and backup next hop addresses.
Currently IPv4 is the only supported address type.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.10

cadRouteMapNextHop

The address of the adjacent next hop router to use in forwading
the matching packet. The next hop router address must be the
address of an ajacent router, and the routing table (VRF?) is
used to verify that the addre…

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.11

cadRouteMapSetBackupNextHop

Indicates whether the backup next hop setting should be used to specify
the adjacent next hop router when forwarding the matching packet. This
only would be done if the primary next hop was not set or was unreachable.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.12

cadRouteMapBackupNextHop

The address type of a second next hop, that can be used only
if the primary next hop address can not be reached. Only Ipv4
addresses are currently supported.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.13

cadRouteMapSetNullInterface

If set to true and the packet matches the ACL, it will be dropped.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.14

cadRouteMapRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.15

cadRouteMapSetIpDscp

Indicates whether the IP DSCP should be changed on the packet
if it matches the ACL and this is a permit type of match.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.16

cadRouteMapIpDscp

The IP DSCP value that should be used to replace the
existing IP DSCP of the matching packet.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.17

cadRouteMapSetRecursiveNextHop

Indicates whether the recursive next hop setting should be used to specify
the next hop for the remote router when forwarding the matching packet.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.18

cadRouteMapRecursiveNextHop

The address type of a remote router next hop, that is used to perform a recursive
route lookup. Only Ipv4 addresses are currently supported.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.19

cadRouteMapStatsTable

table

.1.3.6.1.4.1.4998.1.1.35.1.30.3 · 1 row entry · 4 columns

Open in standard view

This table contains policy route map counts where each row
contains information about the number of packets that match
the specified ACL and were successfully changed with the defined
set operations, as well as those that matched the ACL but failed
the set operations.

cadRouteMapStatsEntry entry .1.3.6.1.4.1.4998.1.1.35.1.30.3.1

A conceptual row containing counts information for a policy route map entry.

Indexes

cadRouteMapId cadRouteMapSeqNum

Column	Syntax	OID
cadRouteMapPktMatched The number of packets that match the ACL defined in the route map entry and where the action was also successful. For matches of type deny, the packet is routed by destination, and for packets of type match, the packet…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4998.1.1.35.1.30.3.1.1`
cadRouteMapByteMatched The number of bytes that match the ACL defined in the route map entry and where the action was also successful. For matches of type deny, the packet is routed by destination, and for packets of type match, the packet i…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4998.1.1.35.1.30.3.1.2`
cadRouteMapPktFailed The number of packets that match the ACL defined in the route map entry and where the action failed. For route map entries of type match, the set operation failed.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4998.1.1.35.1.30.3.1.3`
cadRouteMapByteFailed The number of packets that match the ACL defined in the route map entry and where the action failed. For route map entries of type match, the set operation failed.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.4998.1.1.35.1.30.3.1.4`