cadAclIpAddrType
CADANT-CMTS-POLICY-MIB ·
.1.3.6.1.4.1.4998.1.1.35.1.6.1.27
Object
IP Address type
Context
- MIB
- CADANT-CMTS-POLICY-MIB
- OID
.1.3.6.1.4.1.4998.1.1.35.1.6.1.27- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cadPolicyAclEntry
- Table
- cadPolicyAclTable
- Siblings
- 25
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cadAclNumber IPv6 ACL number. IPv6 ACLs are in the range 200-399.
Extended ACL number. Extended ACLs are in the range 100-199.
Standard ACLs are in the range 1-99. | column | Integer32 | .1.3.6.1.4.1.4998.1.1.35.1.6.1.1 |
| cadAclSrcPortLo First Source port number to match. -1 indicates that this
field is not used. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4998.1.1.35.1.6.1.10 |
| cadAclSrcPortHi Second Source port number to match. -1 indicates that this
field is not used. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4998.1.1.35.1.6.1.11 |
| cadAclDstIp Destination IP address to match | column | CADANT-TCInetAddressIPv4or6 | .1.3.6.1.4.1.4998.1.1.35.1.6.1.12 |
| cadAclDstIpMask Destination IP wildcard (inverse) mask to match.
Default to match anything. | column | CADANT-TCInetAddressIPv4or6 | .1.3.6.1.4.1.4998.1.1.35.1.6.1.13 |
| cadAclDstPortOp Destination port condition (lt,gt,eq,ne) to match. | column | CADANT-TCCadExtAclCondition | .1.3.6.1.4.1.4998.1.1.35.1.6.1.14 |
| cadAclDstPortLo First Destination port number to match. -1 indicates that
this field is not used. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4998.1.1.35.1.6.1.15 |
| cadAclDstPortHi Second Destination port number to match. -1 indicates that
this field is not used | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4998.1.1.35.1.6.1.16 |
| cadAclLogging Turn on or off the ACE matching log | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.35.1.6.1.17 |
| cadAclProtoType Sub-protocol qualifiers. For protocol type ICMP, this value
matches the ICMP message type (0 - 255). For IGMP, this
value matches the IGMP message type (0-15). A value of -1
m… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4998.1.1.35.1.6.1.18 |
| cadAclProtoCode Sub-protocol qualifiers. For protocol type ICMP, this value
matches the ICMP message type code (0 - 255). A value of -1
indicates this value is not used. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4998.1.1.35.1.6.1.19 |
| cadAclIndex Order in which this ACE is used in the ACL. | column | Integer32 | .1.3.6.1.4.1.4998.1.1.35.1.6.1.2 |
| cadAclIpTos Matches the TOS field of the IP header. | column | CADANT-TCCadIpTos | .1.3.6.1.4.1.4998.1.1.35.1.6.1.20 |
| cadAclIpTosMask Mask to apply to the IpTos object when finding a mactch
on the TOS field of the IP header. A value of 0 is used
to indicate that the TOS is not used. | column | CADANT-TCCadIpTosMask | .1.3.6.1.4.1.4998.1.1.35.1.6.1.21 |
| cadAclTcpFlags Matches the flags field of the TCP header. | column | CADANT-TCCadTcpFlags | .1.3.6.1.4.1.4998.1.1.35.1.6.1.22 |
| cadAclTcpFlagsMask Mask to apply to the TcpFlags object when finding a mactch
on the flags field of the TCP header. | column | CADANT-TCCadTcpFlags | .1.3.6.1.4.1.4998.1.1.35.1.6.1.23 |
| cadAclFragments Indicates whether this EACE applies to noninitial fragments
of packets. The default is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.35.1.6.1.24 |
| cadAclRemark The comment associated with the access control entry.
This is only valid for ACEs of type remark. | column | CADANT-TCCadAclString | .1.3.6.1.4.1.4998.1.1.35.1.6.1.26 |
| cadAclType Indicates whether this EACE is used as a standard,
extended, or remark ACL. The rate-limiting type is
not valid for this table. Remark is the only valid
type that can be set, s… | column | CADANT-TCCadAclType | .1.3.6.1.4.1.4998.1.1.35.1.6.1.3 |
| cadAclStatus RowStatus used to add and remove ACEs. ACEs that contain
only remarks should have their status set to notInService
and should be created with createAndWait. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4998.1.1.35.1.6.1.4 |
| cadAclPermit Permit or Deny the packet when matched. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.35.1.6.1.5 |
| cadAclProtocol Protocol number to match | column | CADANT-TCCadProtocolType | .1.3.6.1.4.1.4998.1.1.35.1.6.1.6 |
| cadAclSrcIp Source IP address to match | column | CADANT-TCInetAddressIPv4or6 | .1.3.6.1.4.1.4998.1.1.35.1.6.1.7 |
| cadAclSrcIpMask Source IP wildcard mask to match. Default to match anything | column | CADANT-TCInetAddressIPv4or6 | .1.3.6.1.4.1.4998.1.1.35.1.6.1.8 |
| cadAclSrcPortOp Source port condition (lt,gt,eq,ne) to match. | column | CADANT-TCCadExtAclCondition | .1.3.6.1.4.1.4998.1.1.35.1.6.1.9 |