cadRouteMapSetNullInterface
CADANT-CMTS-POLICY-MIB ·
.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.14
Object
If set to true and the packet matches the ACL, it will be dropped.
Context
- MIB
- CADANT-CMTS-POLICY-MIB
- OID
.1.3.6.1.4.1.4998.1.1.35.1.30.2.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cadRouteMapEntry
- Table
- cadRouteMapTable
- Siblings
- 18
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cadRouteMapId Id used to associate entries in the policy route map table. | column | Integer32 | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.1 |
| cadRouteMapNextHopAddrType The address type of the next hop and backup next hop addresses.
Currently IPv4 is the only supported address type. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.10 |
| cadRouteMapNextHop The address of the adjacent next hop router to use in forwading
the matching packet. The next hop router address must be the
address of an ajacent router, and the routing table … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.11 |
| cadRouteMapSetBackupNextHop Indicates whether the backup next hop setting should be used to specify
the adjacent next hop router when forwarding the matching packet. This
only would be done if the primary ne… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.12 |
| cadRouteMapBackupNextHop The address type of a second next hop, that can be used only
if the primary next hop address can not be reached. Only Ipv4
addresses are currently supported. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.13 |
| cadRouteMapRowStatus The row status variable used according to row installation
and removal convention. In our case, we have simplified this
to the usage of only the following states - active, createA… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.15 |
| cadRouteMapSetIpDscp Indicates whether the IP DSCP should be changed on the packet
if it matches the ACL and this is a permit type of match. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.16 |
| cadRouteMapIpDscp The IP DSCP value that should be used to replace the
existing IP DSCP of the matching packet. | column | Integer32 | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.17 |
| cadRouteMapSetRecursiveNextHop Indicates whether the recursive next hop setting should be used to specify
the next hop for the remote router when forwarding the matching packet. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.18 |
| cadRouteMapRecursiveNextHop The address type of a remote router next hop, that is used to perform a recursive
route lookup. Only Ipv4 addresses are currently supported. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.19 |
| cadRouteMapSeqNum Sequence number used to order the match statements. | column | Integer32 | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.2 |
| cadRouteMapMatchType Type of match to used for this entry. Permit matches
on the provided ACL and then applies the defined set operations
before destination routing. Deny matches on the provided
ACL… | column | Enumeration | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.3 |
| cadRouteMapMatchAcl ACL used to match the incoming packet. Since IPv4 is the only supported
address type, the ACL number must be an extended or standard ACL. A value 0
implies that no ACL is used a… | column | Integer32 | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.4 |
| cadRouteMapSetIpPrec Indicates whether the IP Precedence should be changed on the packet
if it matches the ACL and this is a permit type of match. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.5 |
| cadRouteMapIpPrec The IP precedence value that should be used to replace the
existing IP precedence of the matching packet. | column | Enumeration | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.6 |
| cadRouteMapSetIpTos Indicates whether the IP TOS should be changed on the packet
if it matches the ACL and this is a permit type of match. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.7 |
| cadRouteMapIpTos The IP TOS value that should be used to replace the
existing IP TOS of the matching packet. | column | Enumeration | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.8 |
| cadRouteMapSetNextHop Indicates whether the next hop setting should be used to specify
the adjacent next hop router when forwarding the matching packet. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.35.1.30.2.1.9 |