BAY-STACK-PETH-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
20

bspePethPsePortExtTable

table
.1.3.6.1.4.1.45.5.8.1.1 · 1 row entry · 15 columns
Open in standard view 
This table extends the pethPsePortTable.
bspePethPsePortExtEntry entry .1.3.6.1.4.1.45.5.8.1.1.1
An entry that extends pethPsePortEntry.
Indexes
bspePethPsePortExtGroupIndex bspePethPsePortExtIndex
Column Syntax OID
bspePethPsePortExtGroupIndex
This object is equal to the value of pethPsePortGroupIndex
of the entry in the pethPsePortTable extended by this entry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.45.5.8.1.1.1.1
bspePethPsePortExtIndex
This object is equal to the value of pethPsePortIndex of the
entry in the pethPsePortTable extended by this entry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.45.5.8.1.1.1.2
bspePethPsePortExtPowerLimit
DTE Power limit per port.
wattsInteger32r/w
Constraints:
range: 3-98
 .1.3.6.1.4.1.45.5.8.1.1.1.3
bspePethPsePortExtDetailedStatus
Port Status.
Valid values for Harrier: 4,8,9,16.
Valid values for CondorPoE: 1-16.

The object bspePsePortExtDetailedStatus details the status
of the port when pethPsePortDetectionStatus is either
deliveri…
Enumeration
Enumerated Values:
1poweredResistiveDiscovery
2poweredCapacitiveDiscovery
3poweredCiscoLegacyDiscovery
4invalidPD
5overloadFault
6underloadFault
7uvovFault
8powerManaged
9limitOverloadFault
10discoveryDisabled
11unableToResetTps
12unableToInitializeTps
13uninitialized
14nonexistent
15otherFault
16detectionStatus
 .1.3.6.1.4.1.45.5.8.1.1.1.4
bspePethPsePortExtMeasuredVoltage
Measured Port Voltage. When the port is not supplying
power, the value will be 0.
decivoltsUnsigned32
Constraints:
range: 0-0
range: 400-580
 .1.3.6.1.4.1.45.5.8.1.1.1.5
bspePethPsePortExtMeasuredCurrent
Measured Port Current.
milliampsUnsigned32
Constraints:
range: 0-1920
 .1.3.6.1.4.1.45.5.8.1.1.1.6
bspePethPsePortExtMeasuredPower
Measured Port Power. This value may not exceed 1000 times the
current value of bspePethPsePortExtPowerLimit.
milliwattsUnsigned32
Constraints:
range: 0-98000
 .1.3.6.1.4.1.45.5.8.1.1.1.7
bspePethPsePortExtCurrentStatus
Describes a current port status related to the power generation.
The value ok(1) indicates neither an undercurrent nor an overcurrent
condition was detected since the attribute was last cleared.
The value underCurrent(2…
Enumeration
Enumerated Values:
1ok
2underCurrent
3overCurrent
4both
 .1.3.6.1.4.1.45.5.8.1.1.1.8
bspePethPsePortExtCurrentStatusClear
Setting the value of this object to clear(1) clears the value
of bspePethPsePortExtCurrentStatus, and enables the agent to
update it.
Read operation this value will be off(2).
Enumerationr/w
Enumerated Values:
1clear
2off
 .1.3.6.1.4.1.45.5.8.1.1.1.9
bspePethPsePortExtPowerUpMode
Describes the power up mode for the current port.
The value dot3af(1) indicates an inrush current of 400mA-450mA.
The value highInrush(2) indicates an inrush current as described
by the Icut/Ilim (default is 700mA - 1.…
Enumerationr/w
Enumerated Values:
1dot3af
2highInrush
3pre802dot3at
4dot3at
 .1.3.6.1.4.1.45.5.8.1.1.1.10
bspePethPsePortExtPowerPairs
Describes or controls the pairs in use. If the value of
pethPsePortPowerPairsControl is true, this object is
writable.
A value of signal(1) means that the signal pairs
only are in use.
A value of spare(2) means that th…
Enumerationr/w
Enumerated Values:
1signal
2spare
3both
 .1.3.6.1.4.1.45.5.8.1.1.1.11
bspePethPsePortExtLldp
Describes the LLDP negotation status for the current port.
The value enable(1) indicates that LLDP negotation is enabled.
The value disable(2) indicates that LLDP negotation is disabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.45.5.8.1.1.1.12
bspePethPsePortFastPoeEnable
true (1) An interface which can provide the Fast POE function.
false(2) The interface will act as it would if it had no Fast POE function.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.45.5.8.1.1.1.13
bspePethPsePortPerpetualPoeEnable
true (1) An interface which can provide the Perpetual POE function.
false(2) The interface will act as it would if it had no Perpetual POE function.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.45.5.8.1.1.1.14
bspePethPsePortPowerClassifications
Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
Devices such as IP telephones, WLAN access points and others,
will be classified according to their …
Enumeration
Enumerated Values:
1class0
2class1
3class2
4class3
5class4
6class5
7class6
8class7
9class8
 .1.3.6.1.4.1.45.5.8.1.1.1.15

bspePethMainPseExtTable

table
.1.3.6.1.4.1.45.5.8.1.2 · 1 row entry · 5 columns
Open in standard view 
This table extends the pethMainPseTable.
bspePethMainPseExtEntry entry .1.3.6.1.4.1.45.5.8.1.2.1
An entry that extends pethMainPseEntry.
Indexes
bspePethMainPseExtGroupIndex
Column Syntax OID
bspePethMainPseExtGroupIndex
This object is equal to the value of pethMainPseGroupIndex
of the entry in the pethMainPseTable extended by this entry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.45.5.8.1.2.1.1
bspePethMainPseExtPowerPresent
Current Power Source Present. Available power sources are AC
and DC.
A value of acOnly(1) indicates that the only power supply is AC.
A value of dcOnly(2) indicates that the only power supply is DC.
A value of acDc(3) i…
Enumeration
Enumerated Values:
1acOnly
2dcOnly
3acDc
 .1.3.6.1.4.1.45.5.8.1.2.1.2
bspePethMainPseExtDisconnectScheme
When a low power draw is detected on a port, power will be
turned off on that port. As a detection mechanism it can be
used either AC Disconnect or DC Disconnect.
A value of acDisconnect(1): AC impedance is monitored on…
Enumerationr/w
Enumerated Values:
1acDisconnect
2dcDisconnect
 .1.3.6.1.4.1.45.5.8.1.2.1.3
bspePethMainPseFastPoeEnable
Enable or disable Fast POE feature.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.45.5.8.1.2.1.4
bspePethMainPsePerpetualPoeEnable
Enable or disable Perpetual POE feature.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.45.5.8.1.2.1.5