bspePethPsePortExtIndex
BAY-STACK-PETH-EXT-MIB ·
.1.3.6.1.4.1.45.5.8.1.1.1.2
Object
column
Integer32
This object is equal to the value of pethPsePortIndex of the entry in the pethPsePortTable extended by this entry.
Context
- MIB
- BAY-STACK-PETH-EXT-MIB
- OID
.1.3.6.1.4.1.45.5.8.1.1.1.2- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- bspePethPsePortExtEntry
- Table
- bspePethPsePortExtTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bspePethPsePortExtGroupIndex This object is equal to the value of pethPsePortGroupIndex
of the entry in the pethPsePortTable extended by this entry. | column | Integer32 | .1.3.6.1.4.1.45.5.8.1.1.1.1 |
| bspePethPsePortExtPowerUpMode Describes the power up mode for the current port.
The value dot3af(1) indicates an inrush current of 400mA-450mA.
The value highInrush(2) indicates an inrush current as described … | column | Enumeration | .1.3.6.1.4.1.45.5.8.1.1.1.10 |
| bspePethPsePortExtPowerPairs Describes or controls the pairs in use. If the value of
pethPsePortPowerPairsControl is true, this object is
writable.
A value of signal(1) means that the signal pairs
only are i… | column | Enumeration | .1.3.6.1.4.1.45.5.8.1.1.1.11 |
| bspePethPsePortExtLldp Describes the LLDP negotation status for the current port.
The value enable(1) indicates that LLDP negotation is enabled.
The value disable(2) indicates that LLDP negotation is di… | column | Enumeration | .1.3.6.1.4.1.45.5.8.1.1.1.12 |
| bspePethPsePortFastPoeEnable true (1) An interface which can provide the Fast POE function.
false(2) The interface will act as it would if it had no Fast POE function. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.8.1.1.1.13 |
| bspePethPsePortPerpetualPoeEnable true (1) An interface which can provide the Perpetual POE function.
false(2) The interface will act as it would if it had no Perpetual POE function. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.8.1.1.1.14 |
| bspePethPsePortPowerClassifications Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
Devices such as IP telephones, WLAN access points and others… | column | Enumeration | .1.3.6.1.4.1.45.5.8.1.1.1.15 |
| bspePethPsePortExtPowerLimit DTE Power limit per port. | column | watts Integer32 | .1.3.6.1.4.1.45.5.8.1.1.1.3 |
| bspePethPsePortExtDetailedStatus Port Status.
Valid values for Harrier: 4,8,9,16.
Valid values for CondorPoE: 1-16.
The object bspePsePortExtDetailedStatus details the status
of the port when pethP… | column | Enumeration | .1.3.6.1.4.1.45.5.8.1.1.1.4 |
| bspePethPsePortExtMeasuredVoltage Measured Port Voltage. When the port is not supplying
power, the value will be 0. | column | decivolts Unsigned32 | .1.3.6.1.4.1.45.5.8.1.1.1.5 |
| bspePethPsePortExtMeasuredCurrent Measured Port Current. | column | milliamps Unsigned32 | .1.3.6.1.4.1.45.5.8.1.1.1.6 |
| bspePethPsePortExtMeasuredPower Measured Port Power. This value may not exceed 1000 times the
current value of bspePethPsePortExtPowerLimit. | column | milliwatts Unsigned32 | .1.3.6.1.4.1.45.5.8.1.1.1.7 |
| bspePethPsePortExtCurrentStatus Describes a current port status related to the power generation.
The value ok(1) indicates neither an undercurrent nor an overcurrent
condition was detected since the attribute wa… | column | Enumeration | .1.3.6.1.4.1.45.5.8.1.1.1.8 |
| bspePethPsePortExtCurrentStatusClear Setting the value of this object to clear(1) clears the value
of bspePethPsePortExtCurrentStatus, and enables the agent to
update it.
Read operation this value will be off(2). | column | Enumeration | .1.3.6.1.4.1.45.5.8.1.1.1.9 |