bspePethPsePortExtCurrentStatus
BAY-STACK-PETH-EXT-MIB ·
.1.3.6.1.4.1.45.5.8.1.1.1.8
Object
column
Enumeration
Describes a current port status related to the power generation. The value ok(1) indicates neither an undercurrent nor an overcurrent condition was detected since the attribute was last cleared. The value underCurrent(2) indicates that the port current is below the minimal value. The value overCurrent(3) indicates that the port current exceeds the maximal value. The value both(4) indicates both underCurrent and overCurrent. This attribute is cleared through the bspePethPsePortExtCurrentStatusClear action.
Context
- MIB
- BAY-STACK-PETH-EXT-MIB
- OID
.1.3.6.1.4.1.45.5.8.1.1.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- bspePethPsePortExtEntry
- Table
- bspePethPsePortExtTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | ok |
2 | underCurrent |
3 | overCurrent |
4 | both |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bspePethPsePortExtGroupIndex This object is equal to the value of pethPsePortGroupIndex
of the entry in the pethPsePortTable extended by this entry. | column | Integer32 | .1.3.6.1.4.1.45.5.8.1.1.1.1 |
| bspePethPsePortExtPowerUpMode Describes the power up mode for the current port.
The value dot3af(1) indicates an inrush current of 400mA-450mA.
The value highInrush(2) indicates an inrush current as described … | column | Enumeration | .1.3.6.1.4.1.45.5.8.1.1.1.10 |
| bspePethPsePortExtPowerPairs Describes or controls the pairs in use. If the value of
pethPsePortPowerPairsControl is true, this object is
writable.
A value of signal(1) means that the signal pairs
only are i… | column | Enumeration | .1.3.6.1.4.1.45.5.8.1.1.1.11 |
| bspePethPsePortExtLldp Describes the LLDP negotation status for the current port.
The value enable(1) indicates that LLDP negotation is enabled.
The value disable(2) indicates that LLDP negotation is di… | column | Enumeration | .1.3.6.1.4.1.45.5.8.1.1.1.12 |
| bspePethPsePortFastPoeEnable true (1) An interface which can provide the Fast POE function.
false(2) The interface will act as it would if it had no Fast POE function. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.8.1.1.1.13 |
| bspePethPsePortPerpetualPoeEnable true (1) An interface which can provide the Perpetual POE function.
false(2) The interface will act as it would if it had no Perpetual POE function. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.8.1.1.1.14 |
| bspePethPsePortPowerClassifications Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
Devices such as IP telephones, WLAN access points and others… | column | Enumeration | .1.3.6.1.4.1.45.5.8.1.1.1.15 |
| bspePethPsePortExtIndex This object is equal to the value of pethPsePortIndex of the
entry in the pethPsePortTable extended by this entry. | column | Integer32 | .1.3.6.1.4.1.45.5.8.1.1.1.2 |
| bspePethPsePortExtPowerLimit DTE Power limit per port. | column | watts Integer32 | .1.3.6.1.4.1.45.5.8.1.1.1.3 |
| bspePethPsePortExtDetailedStatus Port Status.
Valid values for Harrier: 4,8,9,16.
Valid values for CondorPoE: 1-16.
The object bspePsePortExtDetailedStatus details the status
of the port when pethP… | column | Enumeration | .1.3.6.1.4.1.45.5.8.1.1.1.4 |
| bspePethPsePortExtMeasuredVoltage Measured Port Voltage. When the port is not supplying
power, the value will be 0. | column | decivolts Unsigned32 | .1.3.6.1.4.1.45.5.8.1.1.1.5 |
| bspePethPsePortExtMeasuredCurrent Measured Port Current. | column | milliamps Unsigned32 | .1.3.6.1.4.1.45.5.8.1.1.1.6 |
| bspePethPsePortExtMeasuredPower Measured Port Power. This value may not exceed 1000 times the
current value of bspePethPsePortExtPowerLimit. | column | milliwatts Unsigned32 | .1.3.6.1.4.1.45.5.8.1.1.1.7 |
| bspePethPsePortExtCurrentStatusClear Setting the value of this object to clear(1) clears the value
of bspePethPsePortExtCurrentStatus, and enables the agent to
update it.
Read operation this value will be off(2). | column | Enumeration | .1.3.6.1.4.1.45.5.8.1.1.1.9 |