bspePethPsePortPowerClassifications – BAY-STACK-PETH-EXT-MIB

Object

column Enumeration

Classification is a way to tag different terminals on the
Power over LAN network according to their power consumption.
Devices such as IP telephones, WLAN access points and others,
will be classified according to their power requirements.
              
The meaning of the classification labels is defined in the
IEEE specification.
              
This variable is valid only while a PD is being powered,
that is, while the attribute pethPsePortDetectionStatus
is reporting the enumeration deliveringPower.

Context

MIB: BAY-STACK-PETH-EXT-MIB
OID: .1.3.6.1.4.1.45.5.8.1.1.1.15
Type: column
Access: readonly
Status: current
Parent: bspePethPsePortExtEntry
Table: bspePethPsePortExtTable
Siblings: 14

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	class0
`2`	class1
`3`	class2
`4`	class3
`5`	class4
`6`	class5
`7`	class6
`8`	class7
`9`	class8

Related Objects

Sibling Objects

Object	Type	Syntax	OID
bspePethPsePortExtGroupIndex This object is equal to the value of pethPsePortGroupIndex of the entry in the pethPsePortTable extended by this entry.	column	Integer32	`.1.3.6.1.4.1.45.5.8.1.1.1.1`
bspePethPsePortExtPowerUpMode Describes the power up mode for the current port. The value dot3af(1) indicates an inrush current of 400mA-450mA. The value highInrush(2) indicates an inrush current as described …	column	Enumeration	`.1.3.6.1.4.1.45.5.8.1.1.1.10`
bspePethPsePortExtPowerPairs Describes or controls the pairs in use. If the value of pethPsePortPowerPairsControl is true, this object is writable. A value of signal(1) means that the signal pairs only are i…	column	Enumeration	`.1.3.6.1.4.1.45.5.8.1.1.1.11`
bspePethPsePortExtLldp Describes the LLDP negotation status for the current port. The value enable(1) indicates that LLDP negotation is enabled. The value disable(2) indicates that LLDP negotation is di…	column	Enumeration	`.1.3.6.1.4.1.45.5.8.1.1.1.12`
bspePethPsePortFastPoeEnable true (1) An interface which can provide the Fast POE function. false(2) The interface will act as it would if it had no Fast POE function.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.45.5.8.1.1.1.13`
bspePethPsePortPerpetualPoeEnable true (1) An interface which can provide the Perpetual POE function. false(2) The interface will act as it would if it had no Perpetual POE function.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.45.5.8.1.1.1.14`
bspePethPsePortExtIndex This object is equal to the value of pethPsePortIndex of the entry in the pethPsePortTable extended by this entry.	column	Integer32	`.1.3.6.1.4.1.45.5.8.1.1.1.2`
bspePethPsePortExtPowerLimit DTE Power limit per port.	column	watts Integer32	`.1.3.6.1.4.1.45.5.8.1.1.1.3`
bspePethPsePortExtDetailedStatus Port Status. Valid values for Harrier: 4,8,9,16. Valid values for CondorPoE: 1-16. The object bspePsePortExtDetailedStatus details the status of the port when pethP…	column	Enumeration	`.1.3.6.1.4.1.45.5.8.1.1.1.4`
bspePethPsePortExtMeasuredVoltage Measured Port Voltage. When the port is not supplying power, the value will be 0.	column	decivolts Unsigned32	`.1.3.6.1.4.1.45.5.8.1.1.1.5`
bspePethPsePortExtMeasuredCurrent Measured Port Current.	column	milliamps Unsigned32	`.1.3.6.1.4.1.45.5.8.1.1.1.6`
bspePethPsePortExtMeasuredPower Measured Port Power. This value may not exceed 1000 times the current value of bspePethPsePortExtPowerLimit.	column	milliwatts Unsigned32	`.1.3.6.1.4.1.45.5.8.1.1.1.7`
bspePethPsePortExtCurrentStatus Describes a current port status related to the power generation. The value ok(1) indicates neither an undercurrent nor an overcurrent condition was detected since the attribute wa…	column	Enumeration	`.1.3.6.1.4.1.45.5.8.1.1.1.8`
bspePethPsePortExtCurrentStatusClear Setting the value of this object to clear(1) clears the value of bspePethPsePortExtCurrentStatus, and enables the agent to update it. Read operation this value will be off(2).	column	Enumeration	`.1.3.6.1.4.1.45.5.8.1.1.1.9`