BAY-STACK-EAPOL-EXTENSION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

bseePortConfigTable

table

.1.3.6.1.4.1.45.5.3.3 · 1 row entry · 29 columns

Open in standard view

This table is used to control the EAP multihost configuration
for each port in the system.

bseePortConfigEntry entry .1.3.6.1.4.1.45.5.3.3.1

The EAP multihost configuration for a port.

Indexes

bseePortConfigPortNumber

Column Syntax OID

bseePortConfigPortNumber

The Port number associated with this Port.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.45.5.3.3.1.1

bseePortConfigGuestVlanId

This object specifies the ID of the guest VLAN for this port.
Access to the guest VLAN is allowed for MAC addresses before EAP
authentication has been performed.

If the value of this object is 0, then the…

Q-BRIDGE-MIBVlanIdOrNoner/w

Textual Convention: Q-BRIDGE-MIBVlanIdOrNone Integer32

Type Constraints:
range: 0..4094

.1.3.6.1.4.1.45.5.3.3.1.2

bseePortConfigMultiHostEnabled

This object controls whether EAP multihost is enabled for a port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.3

bseePortConfigMultiHostEapMaxNumMacs

This object specifies the maximum number of EAP-authentication
MAC addresses allowed on this port. A value of 0 indicates that
there is no port-specific limit.

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.45.5.3.3.1.4

bseePortConfigMultiHostAllowNonEapClient

This object controls whether non-EAP clients (MAC addresses) are
allowed on the port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.5

bseePortConfigMultiHostNonEapMacSource deprecated

This object controls the source for finding allowed non-EAP MAC
addresses.

Enumerationr/w

Enumerated Values:

1	autoLearn
2	userConfig
3	radius

.1.3.6.1.4.1.45.5.3.3.1.6

bseePortConfigMultiHostNonEapMaxNumMacs

This object specifies the maximum number of non-EAP authenticated
MAC addresses allowed on this port.

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.45.5.3.3.1.7

bseePortConfigGuestVlanEnabled

This object controls whether access to the guest VLAN is allowed
for a port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.8

bseePortConfigMultiHostRadiusAuthNonEapClient

This object controls whether non-EAP clients (MAC addresses) may
authenticated using RADIUS on the port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.9

bseePortConfigMultiHostSingleAuthEnabled

This object controls whether non-EAP clients (MAC addresses) may
be automatically authenticated on the port after an EAP client has
been authenticated (known as MHSA).

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.10

bseePortConfigMultiHostAllowNonEapPhones

This object indicates whether IP phones will be allowed access
based on DHCP.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.11

bseePortConfigMultiHostAllowRadiusAssignedVlan

This object indicates whether to allow the use of RADIUS-assigned
VLANs in multihost-eap mode.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.12

bseePortConfigMultiHostEapPacketMode

This object indicates whether to use unicast or multicast packets
for Eap-ReqId packets. Normally, multicast packets are used.

Enumerationr/w

Enumerated Values:

1	multicast
2	unicast

.1.3.6.1.4.1.45.5.3.3.1.13

bseePortConfigMultiHostEapRadiusTimeoutMode

This object indicates whether or not to fail authentication of EAP
users on a RADIUS timeout.

Enumerationr/w

Enumerated Values:

1	fail
2	doNotFail

.1.3.6.1.4.1.45.5.3.3.1.14

bseePortConfigMultiHostAllowNonEapRadiusAssignedVlan

This object indicates whether to allow the use of RADIUS-assigned
VLANs in multihost-eap mode for non-EAP clients.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.15

bseePortConfigProcessRadiusRequestsServerPackets

This object indicates whether to process any RADIUS requests-server
packets that are received on this port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.16

bseePortConfigEapProtocolEnabled

This object controls whether EAP protocol packets are processed
on this port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.17

bseePortConfigMultiHostUseMostRecentRadiusAssignedVlan

Controls whether to use most recent RADIUS-assigned VLAN.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.18

bseePortConfigMultiHostClearNeap

Setting this object will clear NEAP authenticated clients from the
authentication list. If the value is set to 00:00:00:00:00:00, all
clients will be cleared from this port. Otherwise, only a specific
client will be c…

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.45.5.3.3.1.19

bseePortConfigMultiHostBlockDifferentVlanAuth

Controls whether to block authentication of clients which have an
associated RADIUS assigned VLAN with an invalid value or different
from first client authenticated on the same port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.20

bseePortConfigMultiHostAdacNonEapEnabled

This object specifies whether the authentication of Non-EAP phones
using ADAC is allowed on this port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.21

bseePortConfigDefaultEapAll

This object specifies whether to default all EAP settings on this port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.22

bseePortConfigMultiHostMaxMacs

This object specifies the maximum number of EAP and NEAP clients allowed on this port.

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.45.5.3.3.1.23

bseePortConfigMultiHostSingleAuthNoLimit

This object specifies if we limit the number of non-eap clients on a port authenticated in MHSA.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.24

bseePortConfigFailOpenVlanId

This object specifies the ID of the fail-open VLAN for this port in the following format:
-1 : Port PVID is used as Fail Open VLAN
0 : the global fail-open VLAN ID is used for this port, as specified in bseeM…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.45.5.3.3.1.25

bseePortConfigFailOpenVlanEnabled

This object controls whether fail-open is enabled for a port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.3.1.26

bseePortConfigFailOpenVlanUBP

This object represents the UBP filter name of the fail-open policy

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.45.5.3.3.1.27

bseePortConfigCloneSettingsAction

This object starts the action of copying eap settings from current ifIndex to the list of ports specified in bseePortConfigCloneSettingsDestPortList.
The default value will be returned by all read opperations.
The write…

Enumerationr/w

Enumerated Values:

1	none
2	start

.1.3.6.1.4.1.45.5.3.3.1.28

bseePortConfigCloneSettingsDestPortList

This object represents the destination port list on which the EAP port configuration will be copied.
The default value will be returned by all read opperations.
The write operation must contain both bseePortConfigCloneS…

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.45.5.3.3.1.29

bseeMultiHostStatusTable

table

.1.3.6.1.4.1.45.5.3.4 · 1 row entry · 9 columns

Open in standard view

This table provides the EAP authentication status per-MAC address
per-port.

bseeMultiHostStatusEntry entry .1.3.6.1.4.1.45.5.3.4.1

The status of EAP authentication of clients for a port.

Indexes

bseeMultiHostStatusPortNumber bseeMultiHostStatusClientMACAddr

Column Syntax OID

bseeMultiHostStatusPortNumber

The Port number associated with this client.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.45.5.3.4.1.1

bseeMultiHostStatusClientMACAddr

The MAC address of the client.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.45.5.3.4.1.2

bseeMultiHostStatusPaeState

The current value of the Authenticator PAE state machine.

Enumeration

Enumerated Values:

1	initialize
2	disconnected
3	connecting
4	authenticating
5	authenticated
6	aborting
7	held
8	forceAuth
9	forceUnauth

.1.3.6.1.4.1.45.5.3.4.1.3

bseeMultiHostStatusBackendAuthState

The current state of the Backend Authentication state machine.

Enumeration

Enumerated Values:

1	request
2	response
3	success
4	fail
5	timeout
6	idle
7	initialize

.1.3.6.1.4.1.45.5.3.4.1.4

bseeMultiHostStatusReauthenticate

Setting this object to reauthenticate(2) will force the client to
be reauthenticated. When retrieved, the value of this object is
always other(1).

Enumerationr/w

Enumerated Values:

1	other
2	reauthenticate

.1.3.6.1.4.1.45.5.3.4.1.5

bseeMultiHostStatusVid

The Vlan ID associated with this client for MultiVlan capabilities.
If MultiVlan is not enabled for this client, the value of this object
will be 4095.

Q-BRIDGE-MIBVlanIdOrAny

Textual Convention: Q-BRIDGE-MIBVlanIdOrAny Integer32

Type Constraints:
range: 1..4095

.1.3.6.1.4.1.45.5.3.4.1.6

bseeMultiHostStatusPri

The Vlan priority value associated with this client for MultiVlan
capabilities. If MultiVlan is not enabled for this client, the
value of this object will be 8.

Integer32

Constraints:
range: 0-8

.1.3.6.1.4.1.45.5.3.4.1.7

bseeMultiHostStatusFaBindings

The EAP vlan:isid bindings. Vlan is represented on 2 bytes. Isid is
represented on 4 bytes. The output OctetString would be a continuous
hexadecimal representation of VLAN followed by corresponding ISID.
Example:
L…

OctetString

Constraints:
range: 0-96

.1.3.6.1.4.1.45.5.3.4.1.8

bseeMultiHostStatusPacpState

The current value of the Authenticator PACP state machine.

Enumeration

Enumerated Values:

1	initialize
2	unauthenticated
3	authenticating
4	authenticated
5	held

.1.3.6.1.4.1.45.5.3.4.1.9

bseeMultiHostSessionStatsTable

table

.1.3.6.1.4.1.45.5.3.5 · 1 row entry · 7 columns

Open in standard view

A table that contains the session statistics objects for the
Authenticator PAE associated with each EAP client on each Port.
An entry appears in this table for each client MAC address on each
port that may authenticate access to itself.

bseeMultiHostSessionStatsEntry entry .1.3.6.1.4.1.45.5.3.5.1

The session statistics information for an Authenticator
PAE. This shows the current values being collected for
each session that is still in progress, or the final
values for the last valid session for each client where…

Indexes

bseeMultiHostSessionStatsPortNumber bseeMultiHostSessionStatsClientMACAddr

Column Syntax OID

bseeMultiHostSessionStatsPortNumber

The Port number associated with this client.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.45.5.3.5.1.1

bseeMultiHostSessionStatsClientMACAddr

The MAC address of this client.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.45.5.3.5.1.2

bseeMultiHostSessionId

A unique identifier for the session, in the
form of a printable ASCII string of at least
three characters.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.45.5.3.5.1.3

bseeMultiHostSessionAuthenticMethod

The authentication method used to establish the session.

Enumeration

Enumerated Values:

1	remoteAuthServer
2	localAuthServer

.1.3.6.1.4.1.45.5.3.5.1.4

bseeMultiHostSessionTime

The duration of the session in seconds.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.45.5.3.5.1.5

bseeMultiHostSessionTerminateCause

The reason for the session termination.

Enumeration

Enumerated Values:

1	supplicantLogoff
2	portFailure
3	supplicantRestart
4	reauthFailed
5	authControlForceUnauth
6	portReInit
7	portAdminDisabled
999	notTerminatedYet

.1.3.6.1.4.1.45.5.3.5.1.6

bseeMultiHostSessionUserName

The User-Name representing the identity of the Supplicant PAE.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.45.5.3.5.1.7

bseeMultiHostNonEapMacTable

table

.1.3.6.1.4.1.45.5.3.6 · 1 row entry · 3 columns

Open in standard view

A table that contains the non-EAP MAC addresses that are
allowed access to EAP-enabled interfaces.

bseeMultiHostNonEapMacEntry entry .1.3.6.1.4.1.45.5.3.6.1

An allowed non-EAP MAC address.

Indexes

bseeMultiHostNonEapMacPortNumber bseeMultiHostNonEapMacClientMACAddr

Column Syntax OID

bseeMultiHostNonEapMacPortNumber

The Port number on which the MAC address is allowed.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.45.5.3.6.1.1

bseeMultiHostNonEapMacClientMACAddr

The MAC address allowed on the port.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.45.5.3.6.1.2

bseeMultiHostNonEapMacRowStatus

This is used to control creation/deletion of entries
in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.45.5.3.6.1.3

bseeMultiHostNonEapStatusTable

table

.1.3.6.1.4.1.45.5.3.7 · 1 row entry · 7 columns

Open in standard view

This table provides the authentication status of non-EAP
clients per-MAC address per-port.

bseeMultiHostNonEapStatusEntry entry .1.3.6.1.4.1.45.5.3.7.1

The status of authentication of a non-EAP client for a port.

Indexes

bseeMultiHostNonEapStatusPortNumber bseeMultiHostNonEapStatusClientMACAddr

Column Syntax OID

bseeMultiHostNonEapStatusPortNumber

The Port number associated with this client.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.45.5.3.7.1.1

bseeMultiHostNonEapStatusClientMACAddr

The MAC address of the client.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.45.5.3.7.1.2

bseeMultiHostNonEapStatusState

The authentication status. Values are:

rejected(1) - the MAC address could not be authenticated
on this port

locallyAuthenticated(2) - the MAC address was authenticated
…

Enumeration

Enumerated Values:

1	rejected
2	locallyAuthenticated
3	radiusPending
4	radiusAuthenticated
5	adacAuthenticated
6	mhsaAuthenticated
7	lldpAuthenticated
8	radiusHeld

.1.3.6.1.4.1.45.5.3.7.1.3

bseeMultiHostNonEapStatusReauthenticate

Setting this object to reauthenticate(2) will force the MAC address
to be reauthenticated. When retrieved, the value of this object is
always other(1).

Enumerationr/w

Enumerated Values:

1	other
2	reauthenticate

.1.3.6.1.4.1.45.5.3.7.1.4

bseeMultiHostNonEapStatusVid

The Vlan ID associated with this client for MultiVlan capabilities.
If MultiVlan is not enabled for this client, the value of this object
will be 4095.

Q-BRIDGE-MIBVlanIdOrAny

Textual Convention: Q-BRIDGE-MIBVlanIdOrAny Integer32

Type Constraints:
range: 1..4095

.1.3.6.1.4.1.45.5.3.7.1.5

bseeMultiHostNonEapStatusPri

The Vlan priority value associated with this client for MultiVlan
capabilities. If MultiVlan is not enabled for this client, the
value of this object will be 8.

Integer32

Constraints:
range: 0-8

.1.3.6.1.4.1.45.5.3.7.1.6

bseeMultiHostNonEapStatusFaBindings

The NEAP vlan:isid bindings. Vlan is represented on 2 bytes. Isid is
represented on 4 bytes. The output OctetString would be a continuous
hexadecimal representation of VLAN followed by corresponding ISID.
Example:
…

OctetString

Constraints:
range: 0-96

.1.3.6.1.4.1.45.5.3.7.1.7

bseeSupplicantUserTable

table

.1.3.6.1.4.1.45.5.3.9 · 1 row entry · 4 columns

Open in standard view

A table that contains the user name and password for the
Supplicant PAE associated with each port.
An entry appears in this table for each port that may
authenticate itself when challenged by a remote system.

bseeSupplicantUserEntry entry .1.3.6.1.4.1.45.5.3.9.1

The configuration information for a Supplicant PAE.

Indexes

bseeSupplicantPortNumber

Column Syntax OID

bseeSupplicantPortNumber

A unique value for each interface. Its value
ranges between 1 and the value of ifNumber. The
value for each interface must remain constant at
least from one re-initialization of the entity's
network management system …

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.45.5.3.9.1.1

bseeSupplicantUserName

The user name currently in use by the Supplicant
PAE state machine.

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.45.5.3.9.1.2

bseeSupplicantPassword

The password currently in use by the Supplicant
PAE state machine.

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.45.5.3.9.1.3

bseeSupplicantUserState

Input the user state to logoff.

Enumerationr/w

Enumerated Values:

1	inactive
2	active
3	logoff

.1.3.6.1.4.1.45.5.3.9.1.4

bseeMultiHostVoipVlanTable

table

.1.3.6.1.4.1.45.5.3.10 · 1 row entry · 3 columns

Open in standard view

A table that contains EAP VoIP Vlan settings.

bseeMultiHostVoipVlanEntry entry .1.3.6.1.4.1.45.5.3.10.1

The configuration information for an EAP VoIP Vlan.

Indexes

bseeMultiHostVoipVlanIndex

Column Syntax OID

bseeMultiHostVoipVlanIndex

A unique identifier for each entry.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.45.5.3.10.1.1

bseeMultiHostVoipVlanId

This object specifies the Vlan ID of the VoIP Vlan.

Q-BRIDGE-MIBVlanIdr/w

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.45.5.3.10.1.2

bseeMultiHostVoipVlanEnabled

This object specifies whether to use this VoIP Vlan.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.45.5.3.10.1.3

bseeMultiHostDhcpAuthPhoneTable

table

.1.3.6.1.4.1.45.5.3.11 · 1 row entry · 3 columns

Open in standard view

This table provides the list of DHCP authenticated IP phones 
per-MAC address per-port.

bseeMultiHostDhcpAuthPhoneEntry entry .1.3.6.1.4.1.45.5.3.11.1

The DHCP authenticated IP phone for a port.

Indexes

bseeMultiHostDhcpAuthPhonePortNumber bseeMultiHostDhcpAuthPhoneClientMACAddr

Column	Syntax	OID
bseeMultiHostDhcpAuthPhonePortNumber The port number associated with the DHCP authenticated IP phone.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.45.5.3.11.1.1`
bseeMultiHostDhcpAuthPhoneClientMACAddr The MAC address of the DHCP authenticated IP phone.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.45.5.3.11.1.2`
bseeMultiHostDhcpAuthPhoneUserName The user name currently in use by the DHCP authenticated IP phone.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.45.5.3.11.1.3`

bseeUnauthenticatedStatusTable

table

.1.3.6.1.4.1.45.5.3.12 · 1 row entry · 4 columns

Open in standard view

This table provides the session status per-MAC address
per-port for unauthenticated MACs.

bseeUnauthenticatedStatusEntry entry .1.3.6.1.4.1.45.5.3.12.1

The status of authentication of clients for a port.

Indexes

bseeUnauthenticatedStatusPortNumber bseeUnauthenticatedStatusClientMACAddr

Column Syntax OID

bseeUnauthenticatedStatusPortNumber

The Port number associated with this client.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.45.5.3.12.1.1

bseeUnauthenticatedStatusClientMACAddr

The MAC address of the client.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.45.5.3.12.1.2

bseeUnauthenticatedStatusType

The reason for unauthentication: intruder MAC (failed authentication), MAC is in guest VLAN, MAC is in fail-open VLAN or it is stored directly after a single authentication (MHSA).

Enumeration

Enumerated Values:

1	intruders
2	guest
3	failOpen
4	mhsa

.1.3.6.1.4.1.45.5.3.12.1.3

bseeUnauthenticatedStatusRadiusStatus

Status for clients who attempted authentication by a Radius server.

Enumeration

Enumerated Values:

1	noRequest
2	pending
3	timeout
4	reject
5	delayed

.1.3.6.1.4.1.45.5.3.12.1.4