bseePortConfigCloneSettingsAction
BAY-STACK-EAPOL-EXTENSION-MIB ·
.1.3.6.1.4.1.45.5.3.3.1.28
Object
column
r/w
Enumeration
This object starts the action of copying eap settings from current ifIndex to the list of ports specified in bseePortConfigCloneSettingsDestPortList. The default value will be returned by all read opperations. The write operation must contain both bseePortConfigCloneSettingsAction and bseePortConfigCloneSettingsDestPortList.
Context
- MIB
- BAY-STACK-EAPOL-EXTENSION-MIB
- OID
.1.3.6.1.4.1.45.5.3.3.1.28- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- bseePortConfigEntry
- Table
- bseePortConfigTable
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | start |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bseePortConfigPortNumber The Port number associated with this Port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.45.5.3.3.1.1 |
| bseePortConfigMultiHostSingleAuthEnabled This object controls whether non-EAP clients (MAC addresses) may
be automatically authenticated on the port after an EAP client has
been authenticated (known as MHSA). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.10 |
| bseePortConfigMultiHostAllowNonEapPhones This object indicates whether IP phones will be allowed access
based on DHCP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.11 |
| bseePortConfigMultiHostAllowRadiusAssignedVlan This object indicates whether to allow the use of RADIUS-assigned
VLANs in multihost-eap mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.12 |
| bseePortConfigMultiHostEapPacketMode This object indicates whether to use unicast or multicast packets
for Eap-ReqId packets. Normally, multicast packets are used. | column | Enumeration | .1.3.6.1.4.1.45.5.3.3.1.13 |
| bseePortConfigMultiHostEapRadiusTimeoutMode This object indicates whether or not to fail authentication of EAP
users on a RADIUS timeout. | column | Enumeration | .1.3.6.1.4.1.45.5.3.3.1.14 |
| bseePortConfigMultiHostAllowNonEapRadiusAssignedVlan This object indicates whether to allow the use of RADIUS-assigned
VLANs in multihost-eap mode for non-EAP clients. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.15 |
| bseePortConfigProcessRadiusRequestsServerPackets This object indicates whether to process any RADIUS requests-server
packets that are received on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.16 |
| bseePortConfigEapProtocolEnabled This object controls whether EAP protocol packets are processed
on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.17 |
| bseePortConfigMultiHostUseMostRecentRadiusAssignedVlan Controls whether to use most recent RADIUS-assigned VLAN. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.18 |
| bseePortConfigMultiHostClearNeap Setting this object will clear NEAP authenticated clients from the
authentication list. If the value is set to 00:00:00:00:00:00, all
clients will be cleared from this port. Oth… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.5.3.3.1.19 |
| bseePortConfigGuestVlanId This object specifies the ID of the guest VLAN for this port.
Access to the guest VLAN is allowed for MAC addresses before EAP
authentication has been performed.
If… | column | Q-BRIDGE-MIBVlanIdOrNone | .1.3.6.1.4.1.45.5.3.3.1.2 |
| bseePortConfigMultiHostBlockDifferentVlanAuth Controls whether to block authentication of clients which have an
associated RADIUS assigned VLAN with an invalid value or different
from first client authenticated on the same po… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.20 |
| bseePortConfigMultiHostAdacNonEapEnabled This object specifies whether the authentication of Non-EAP phones
using ADAC is allowed on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.21 |
| bseePortConfigDefaultEapAll This object specifies whether to default all EAP settings on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.22 |
| bseePortConfigMultiHostMaxMacs This object specifies the maximum number of EAP and NEAP clients allowed on this port. | column | Integer32 | .1.3.6.1.4.1.45.5.3.3.1.23 |
| bseePortConfigMultiHostSingleAuthNoLimit This object specifies if we limit the number of non-eap clients on a port authenticated in MHSA. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.24 |
| bseePortConfigFailOpenVlanId This object specifies the ID of the fail-open VLAN for this port in the following format:
-1 : Port PVID is used as Fail Open VLAN
0 : the global fail-open VLAN ID is u… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.45.5.3.3.1.25 |
| bseePortConfigFailOpenVlanEnabled This object controls whether fail-open is enabled for a port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.26 |
| bseePortConfigFailOpenVlanUBP This object represents the UBP filter name of the fail-open policy | column | OctetString | .1.3.6.1.4.1.45.5.3.3.1.27 |
| bseePortConfigCloneSettingsDestPortList This object represents the destination port list on which the EAP port configuration will be copied.
The default value will be returned by all read opperations.
The write operatio… | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.45.5.3.3.1.29 |
| bseePortConfigMultiHostEnabled This object controls whether EAP multihost is enabled for a port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.3 |
| bseePortConfigMultiHostEapMaxNumMacs This object specifies the maximum number of EAP-authentication
MAC addresses allowed on this port. A value of 0 indicates that
there is no port-specific limit. | column | Integer32 | .1.3.6.1.4.1.45.5.3.3.1.4 |
| bseePortConfigMultiHostAllowNonEapClient This object controls whether non-EAP clients (MAC addresses) are
allowed on the port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.5 |
| bseePortConfigMultiHostNonEapMacSource deprecated This object controls the source for finding allowed non-EAP MAC
addresses. | column | Enumeration | .1.3.6.1.4.1.45.5.3.3.1.6 |
| bseePortConfigMultiHostNonEapMaxNumMacs This object specifies the maximum number of non-EAP authenticated
MAC addresses allowed on this port. | column | Integer32 | .1.3.6.1.4.1.45.5.3.3.1.7 |
| bseePortConfigGuestVlanEnabled This object controls whether access to the guest VLAN is allowed
for a port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.8 |
| bseePortConfigMultiHostRadiusAuthNonEapClient This object controls whether non-EAP clients (MAC addresses) may
authenticated using RADIUS on the port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.9 |