bseePortConfigCloneSettingsDestPortList

BAY-STACK-EAPOL-EXTENSION-MIB · .1.3.6.1.4.1.45.5.3.3.1.29
MIB view Table view

Object

column r/w Q-BRIDGE-MIBPortList 
This object represents the destination port list on which the EAP port configuration will be copied.
The default value will be returned by all read opperations.
The write operation must contain both bseePortConfigCloneSettingsAction and bseePortConfigCloneSettingsDestPortList.

Context

MIB
BAY-STACK-EAPOL-EXTENSION-MIB
OID
.1.3.6.1.4.1.45.5.3.3.1.29
Type
column
Access
readwrite
Status
current
Parent
bseePortConfigEntry
Table
bseePortConfigTable
Siblings
28

Syntax

Q-BRIDGE-MIBPortList
Source
Q-BRIDGE-MIBPortList
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
bseePortConfigPortNumber
The Port number associated with this Port.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.45.5.3.3.1.1
bseePortConfigMultiHostSingleAuthEnabled
This object controls whether non-EAP clients (MAC addresses) may be automatically authenticated on the port after an EAP client has been authenticated (known as MHSA).
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.10
bseePortConfigMultiHostAllowNonEapPhones
This object indicates whether IP phones will be allowed access based on DHCP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.11
bseePortConfigMultiHostAllowRadiusAssignedVlan
This object indicates whether to allow the use of RADIUS-assigned VLANs in multihost-eap mode.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.12
bseePortConfigMultiHostEapPacketMode
This object indicates whether to use unicast or multicast packets for Eap-ReqId packets. Normally, multicast packets are used.
columnEnumeration.1.3.6.1.4.1.45.5.3.3.1.13
bseePortConfigMultiHostEapRadiusTimeoutMode
This object indicates whether or not to fail authentication of EAP users on a RADIUS timeout.
columnEnumeration.1.3.6.1.4.1.45.5.3.3.1.14
bseePortConfigMultiHostAllowNonEapRadiusAssignedVlan
This object indicates whether to allow the use of RADIUS-assigned VLANs in multihost-eap mode for non-EAP clients.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.15
bseePortConfigProcessRadiusRequestsServerPackets
This object indicates whether to process any RADIUS requests-server packets that are received on this port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.16
bseePortConfigEapProtocolEnabled
This object controls whether EAP protocol packets are processed on this port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.17
bseePortConfigMultiHostUseMostRecentRadiusAssignedVlan
Controls whether to use most recent RADIUS-assigned VLAN.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.18
bseePortConfigMultiHostClearNeap
Setting this object will clear NEAP authenticated clients from the authentication list. If the value is set to 00:00:00:00:00:00, all clients will be cleared from this port. Oth…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.45.5.3.3.1.19
bseePortConfigGuestVlanId
This object specifies the ID of the guest VLAN for this port. Access to the guest VLAN is allowed for MAC addresses before EAP authentication has been performed. If…
columnQ-BRIDGE-MIBVlanIdOrNone.1.3.6.1.4.1.45.5.3.3.1.2
bseePortConfigMultiHostBlockDifferentVlanAuth
Controls whether to block authentication of clients which have an associated RADIUS assigned VLAN with an invalid value or different from first client authenticated on the same po…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.20
bseePortConfigMultiHostAdacNonEapEnabled
This object specifies whether the authentication of Non-EAP phones using ADAC is allowed on this port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.21
bseePortConfigDefaultEapAll
This object specifies whether to default all EAP settings on this port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.22
bseePortConfigMultiHostMaxMacs
This object specifies the maximum number of EAP and NEAP clients allowed on this port.
columnInteger32.1.3.6.1.4.1.45.5.3.3.1.23
bseePortConfigMultiHostSingleAuthNoLimit
This object specifies if we limit the number of non-eap clients on a port authenticated in MHSA.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.24
bseePortConfigFailOpenVlanId
This object specifies the ID of the fail-open VLAN for this port in the following format: -1 : Port PVID is used as Fail Open VLAN 0 : the global fail-open VLAN ID is u…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.45.5.3.3.1.25
bseePortConfigFailOpenVlanEnabled
This object controls whether fail-open is enabled for a port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.26
bseePortConfigFailOpenVlanUBP
This object represents the UBP filter name of the fail-open policy
columnOctetString.1.3.6.1.4.1.45.5.3.3.1.27
bseePortConfigCloneSettingsAction
This object starts the action of copying eap settings from current ifIndex to the list of ports specified in bseePortConfigCloneSettingsDestPortList. The default value will be ret…
columnEnumeration.1.3.6.1.4.1.45.5.3.3.1.28
bseePortConfigMultiHostEnabled
This object controls whether EAP multihost is enabled for a port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.3
bseePortConfigMultiHostEapMaxNumMacs
This object specifies the maximum number of EAP-authentication MAC addresses allowed on this port. A value of 0 indicates that there is no port-specific limit.
columnInteger32.1.3.6.1.4.1.45.5.3.3.1.4
bseePortConfigMultiHostAllowNonEapClient
This object controls whether non-EAP clients (MAC addresses) are allowed on the port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.5
bseePortConfigMultiHostNonEapMacSource deprecated
This object controls the source for finding allowed non-EAP MAC addresses.
columnEnumeration.1.3.6.1.4.1.45.5.3.3.1.6
bseePortConfigMultiHostNonEapMaxNumMacs
This object specifies the maximum number of non-EAP authenticated MAC addresses allowed on this port.
columnInteger32.1.3.6.1.4.1.45.5.3.3.1.7
bseePortConfigGuestVlanEnabled
This object controls whether access to the guest VLAN is allowed for a port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.8
bseePortConfigMultiHostRadiusAuthNonEapClient
This object controls whether non-EAP clients (MAC addresses) may authenticated using RADIUS on the port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.45.5.3.3.1.9