bseePortConfigFailOpenVlanUBP
BAY-STACK-EAPOL-EXTENSION-MIB ·
.1.3.6.1.4.1.45.5.3.3.1.27
Object
column
r/w
OctetString
This object represents the UBP filter name of the fail-open policy
Context
- MIB
- BAY-STACK-EAPOL-EXTENSION-MIB
- OID
.1.3.6.1.4.1.45.5.3.3.1.27- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- bseePortConfigEntry
- Table
- bseePortConfigTable
- Siblings
- 28
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bseePortConfigPortNumber The Port number associated with this Port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.45.5.3.3.1.1 |
| bseePortConfigMultiHostSingleAuthEnabled This object controls whether non-EAP clients (MAC addresses) may
be automatically authenticated on the port after an EAP client has
been authenticated (known as MHSA). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.10 |
| bseePortConfigMultiHostAllowNonEapPhones This object indicates whether IP phones will be allowed access
based on DHCP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.11 |
| bseePortConfigMultiHostAllowRadiusAssignedVlan This object indicates whether to allow the use of RADIUS-assigned
VLANs in multihost-eap mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.12 |
| bseePortConfigMultiHostEapPacketMode This object indicates whether to use unicast or multicast packets
for Eap-ReqId packets. Normally, multicast packets are used. | column | Enumeration | .1.3.6.1.4.1.45.5.3.3.1.13 |
| bseePortConfigMultiHostEapRadiusTimeoutMode This object indicates whether or not to fail authentication of EAP
users on a RADIUS timeout. | column | Enumeration | .1.3.6.1.4.1.45.5.3.3.1.14 |
| bseePortConfigMultiHostAllowNonEapRadiusAssignedVlan This object indicates whether to allow the use of RADIUS-assigned
VLANs in multihost-eap mode for non-EAP clients. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.15 |
| bseePortConfigProcessRadiusRequestsServerPackets This object indicates whether to process any RADIUS requests-server
packets that are received on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.16 |
| bseePortConfigEapProtocolEnabled This object controls whether EAP protocol packets are processed
on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.17 |
| bseePortConfigMultiHostUseMostRecentRadiusAssignedVlan Controls whether to use most recent RADIUS-assigned VLAN. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.18 |
| bseePortConfigMultiHostClearNeap Setting this object will clear NEAP authenticated clients from the
authentication list. If the value is set to 00:00:00:00:00:00, all
clients will be cleared from this port. Oth… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.45.5.3.3.1.19 |
| bseePortConfigGuestVlanId This object specifies the ID of the guest VLAN for this port.
Access to the guest VLAN is allowed for MAC addresses before EAP
authentication has been performed.
If… | column | Q-BRIDGE-MIBVlanIdOrNone | .1.3.6.1.4.1.45.5.3.3.1.2 |
| bseePortConfigMultiHostBlockDifferentVlanAuth Controls whether to block authentication of clients which have an
associated RADIUS assigned VLAN with an invalid value or different
from first client authenticated on the same po… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.20 |
| bseePortConfigMultiHostAdacNonEapEnabled This object specifies whether the authentication of Non-EAP phones
using ADAC is allowed on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.21 |
| bseePortConfigDefaultEapAll This object specifies whether to default all EAP settings on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.22 |
| bseePortConfigMultiHostMaxMacs This object specifies the maximum number of EAP and NEAP clients allowed on this port. | column | Integer32 | .1.3.6.1.4.1.45.5.3.3.1.23 |
| bseePortConfigMultiHostSingleAuthNoLimit This object specifies if we limit the number of non-eap clients on a port authenticated in MHSA. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.24 |
| bseePortConfigFailOpenVlanId This object specifies the ID of the fail-open VLAN for this port in the following format:
-1 : Port PVID is used as Fail Open VLAN
0 : the global fail-open VLAN ID is u… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.45.5.3.3.1.25 |
| bseePortConfigFailOpenVlanEnabled This object controls whether fail-open is enabled for a port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.26 |
| bseePortConfigCloneSettingsAction This object starts the action of copying eap settings from current ifIndex to the list of ports specified in bseePortConfigCloneSettingsDestPortList.
The default value will be ret… | column | Enumeration | .1.3.6.1.4.1.45.5.3.3.1.28 |
| bseePortConfigCloneSettingsDestPortList This object represents the destination port list on which the EAP port configuration will be copied.
The default value will be returned by all read opperations.
The write operatio… | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.45.5.3.3.1.29 |
| bseePortConfigMultiHostEnabled This object controls whether EAP multihost is enabled for a port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.3 |
| bseePortConfigMultiHostEapMaxNumMacs This object specifies the maximum number of EAP-authentication
MAC addresses allowed on this port. A value of 0 indicates that
there is no port-specific limit. | column | Integer32 | .1.3.6.1.4.1.45.5.3.3.1.4 |
| bseePortConfigMultiHostAllowNonEapClient This object controls whether non-EAP clients (MAC addresses) are
allowed on the port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.5 |
| bseePortConfigMultiHostNonEapMacSource deprecated This object controls the source for finding allowed non-EAP MAC
addresses. | column | Enumeration | .1.3.6.1.4.1.45.5.3.3.1.6 |
| bseePortConfigMultiHostNonEapMaxNumMacs This object specifies the maximum number of non-EAP authenticated
MAC addresses allowed on this port. | column | Integer32 | .1.3.6.1.4.1.45.5.3.3.1.7 |
| bseePortConfigGuestVlanEnabled This object controls whether access to the guest VLAN is allowed
for a port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.8 |
| bseePortConfigMultiHostRadiusAuthNonEapClient This object controls whether non-EAP clients (MAC addresses) may
authenticated using RADIUS on the port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.5.3.3.1.9 |