ATM-FORUM-SNMP-M4-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
31
Rows
31
Columns
137

atmfM4PhysPathTpTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.6 · 1 row entry · 3 columns
Open in standard view 
The ATM Forum M4 interface Configuration table extensions
for the physical path termination point.
atmfM4PhysPathTpEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.6.1
Columns conceptually added to the interface table
entry for an ATM interface to model the physical path
termination point.

The row of the interface table modeling this object should
also include columns for…
Indexes
IF-MIBifIndex
Column Syntax OID
atmfM4PhysPathTpHwUnitIndex
Specifies the index of the entry in the entPhysicalTable
that represents the device (i.e., card) on which the
physical path terminates.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.6.1.1
atmfM4PhysPathTpPortID
Identifies the port (within the card identified by the
hardware unit index) on which the physical path terminates.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.6.1.2
atmfM4PhysPathTpAlarmSeverityIndex
Specifies the index of the entry in the communications
alarm severity profile table that should be used. The default
value of this object is zero.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.6.1.3

atmfM4TcAdapterTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.7 · 1 row entry · 2 columns
Open in standard view 
The ATM Forum M4 interface Configuration table extensions
for the TC Adapter.
atmfM4TcAdapterEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.7.1
Columns conceptually added to the interface table
entry for an ATM interface to model the TC Adapter.

The row of the interface table modeling this object should
also include columns for the physical path TP…
Indexes
IF-MIBifIndex
Column Syntax OID
atmfM4TcACellScrambling
This attribute is used by the management system to
activate and deactivate the ATM cell scrambling function.
When the value of this attribute is TRUE, cell scrambling
on the interface is activated.

This a…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.7.1.1
atmfM4TcAlarmSeverityIndex
Specifies the index of the entry in the communications
alarm severity profile table that should be used. The
default value of this object is zero.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.7.1.2

atmfM4AtmLayerTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.8 · 1 row entry · 5 columns
Open in standard view 
The ATM Forum M4 interface Configuration table extensions
for the ATM cell layer.
atmfM4AtmLayerEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.8.1
Columns conceptually added to the interface table
entry for an ATM interface to model the ATM cell layer.
The row of the interface table modeling this object should
also include columns for the physical path TP and TC A…
Indexes
IF-MIBifIndex
Column Syntax OID
atmfM4IfType
Specifies the type of ATM cell layer interface defined
on the physical path termination point modeled by this
entry in the interface table. The default value of this
object is none(0).
Enumerationr/w
Enumerated Values:
0none
1uni
2bici
3bissi
 .1.3.6.1.4.1.353.5.1.3.1.1.8.1.1
atmfM4IfLoopbackLocationCode
Specifies the code that shall exist in incoming OAM
Loopback cells that are to be looped back at this
interface.

A value of zero shall indicate that the management system
has not set any loopback location…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.8.1.2
atmfM4IfSubscriberAddress
Specifies the address or newline-delimited list of
addresses assigned to the UNI.

This object shall be present only for table entries that
represent a UNI interface.

The default value of th…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.353.5.1.3.1.1.8.1.3
atmfM4IfPreferredCarrier
Specifies the name of the default carrier to use when one
is not explicitly identified in the call set-up message.

This object shall be present only for table entries that
represent a UNI interface and on…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.353.5.1.3.1.1.8.1.4
atmfM4IfFarEndCarrierNetwork
Specifies the adjacent carrier to which the B-ICI
transmission path is connected.

This object shall be present only for table entries that
represent a B-ICI interface and only when SVC services are
suppor…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.353.5.1.3.1.1.8.1.5

atmfM4VplTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.9 · 1 row entry · 1 columns
Open in standard view 
The ATM Forum M4 VPL Termination Point Configuration
table extensions.  This table augments the VPL
configuration table in RFC 1695.
atmfM4VplEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.9.1
Additional columns for the VPL configuration table entry.
Indexes
No indexes recorded
Column Syntax OID
atmfM4VplSegEndPt
Specifies whether the VPL termination point is a segment
end-point.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.9.1.1

atmfM4VclTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.10 · 1 row entry · 1 columns
Open in standard view 
The ATM Forum M4 VCL Termination Point Configuration
table extensions.  This table augments the VCL
configuration table in RFC 1695.
atmfM4VclEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.10.1
Additional columns for the VCL configuration table entry.
Indexes
No indexes recorded
Column Syntax OID
atmfM4VclSegEndPt
Specifies whether the VCL termination point is a segment
end-point.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.10.1.1

atmfM4VpXConnTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.11 · 1 row entry · 1 columns
Open in standard view 
The ATM Forum M4 VP Cross-Connect Configuration
table extensions.  This table augments the VP Cross-Connect
configuration table in RFC 1695.
atmfM4VpXConnEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.11.1
Additional columns for the VP Cross-Connect table entry.
Indexes
No indexes recorded
Column Syntax OID
atmfM4VpXConnRecover
If FALSE, this cross-connection will be removed on
failure.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.11.1.1

atmfM4VcXConnTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.12 · 1 row entry · 1 columns
Open in standard view 
The ATM Forum M4 VC Cross-Connect Configuration
table extensions.  This table augments the VC Cross-Connect
configuration table in RFC 1695.
atmfM4VcXConnEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.12.1
Additional columns for the VC Cross-Connect table entry.
Indexes
No indexes recorded
Column Syntax OID
atmfM4VcXConnRecover
If FALSE, this cross-connection will be removed on
failure.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.12.1.1

atmfM4VpNextVpiTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.13 · 1 row entry · 1 columns
Open in standard view 
The ATM Forum M4 VP Next VPI value table.  This optional
table supplies unused VPI values for use in creating
entries in the atmVplTable.
atmfM4VpNextVpiEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.13.1
Each entry in this table represents the 'next' VPI
value available for a given ATM interface.

Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it.
Indexes
IF-MIBifIndex
Column Syntax OID
atmfM4VpNextVpiValue
This object contains an appropriate value to be used for
atmVplVpi when creating entries in the atmVplTable. The
value -1 indicates that no unassigned entries are available.
To obtain the atmVplVpi value for a new entr…
Integer32
Constraints:
range: -1-4095
 .1.3.6.1.4.1.353.5.1.3.1.1.13.1.1

atmfM4VcNextVciTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.14 · 1 row entry · 1 columns
Open in standard view 
The ATM Forum M4 VC Next VCI value table.  This optional
table supplies unused VCI values for use in creating
entries in the atmVclTable.
atmfM4VcNextVciEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.14.1
Each entry in this table represents the 'next' VCI
value available for a given ATM interface.

Each VPL Termination Point automatically has
an entry in this table associated with it.
Indexes
IF-MIBifIndex ATM-MIBatmVplVpi
Column Syntax OID
atmfM4VcNextVciValue
This object contains an appropriate value to be used for
atmVclVci when creating entries in the atmVclTable. The
value -1 indicates that no unassigned entries are available.
To obtain the atmVclVci value for a new entr…
Integer32
Constraints:
range: -1-65535
 .1.3.6.1.4.1.353.5.1.3.1.1.14.1.1

atmfM4CellProtoCurrTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.15 · 1 row entry · 5 columns
Open in standard view 
The ATM Forum M4 Cell Protocol Monitoring Current Data
table.
          
This table maintains per-interface statistics for the
fifteen-minute interval currently being collected.
atmfM4CellProtoCurrEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.15.1
An entry in the ATM Forum M4 Cell Protocol Monitoring
Current Data table.

Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it.
Indexes
IF-MIBifIndex
Column Syntax OID
atmfM4CellProtoCurrSuspect
If true, the statistics in this entry may be unreliable.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.15.1.1
atmfM4CellProtoCurrElapsedTime
Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted.
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.15.1.2
atmfM4CellProtoCurrSupprIntvls
This attribute is non-zero only if the ATM NE is
suppressing ATM Cell Protocol Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.

When …
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.15.1.3
atmfM4CellProtoCurrProtoErrors
The number of ATM cells dropped on this interface, due to
an unrecognized field or set of fields in the ATM cell
header, since the start of this interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.15.1.4
atmfM4CellProtoCurrInOAMCells
The number of OAM cells received at this interface since
the start of this interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.15.1.5

atmfM4CellProtoHistTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.16 · 1 row entry · 6 columns
Open in standard view 
The ATM Forum M4 Cell Protocol Monitoring History Data
table.
          
This table maintains per-interface statistics for previous
fifteen-minute intervals.
atmfM4CellProtoHistEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.16.1
An entry in the ATM Forum M4 Cell Protocol Monitoring
History Data table.

Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it for each fifteen-
minute interval …
Indexes
IF-MIBifIndex atmfM4CellProtoHistIndex
Column Syntax OID
atmfM4CellProtoHistIndex
A number between 1 and 96, which identifies the interval
for which the set of statistics in this entry was
collected.

The interval identified by 1 is the most recently completed
15 minute interval, and th…
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.353.5.1.3.1.1.16.1.1
atmfM4CellProtoHistSuspect
If true, the statistics in this entry may be unreliable.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.16.1.2
atmfM4CellProtoHistElapsedTime
Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted.
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.16.1.3
atmfM4CellProtoHistSupprIntvls
This attribute is non-zero only if the ATM NE is
suppressing ATM Cell Protocol Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.

When …
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.16.1.4
atmfM4CellProtoHistProtoErrors
The number of ATM cells dropped on this interface, due to
an unrecognized field or set of fields in the ATM cell
header, during this interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.16.1.5
atmfM4CellProtoHistInOAMCells
The number of OAM cells received at this interface during
this interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.16.1.6

atmfM4CellProtoErrorTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.17 · 1 row entry · 5 columns
Open in standard view 
The ATM Forum M4 Cell Protocol Monitoring Error Log
table.
          
This table maintains a record of the last error of each
type encountered on each interface, as a result of ATM
Cell Protocol Monitoring.
atmfM4CellProtoErrorEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.17.1
An entry in the ATM Forum M4 Cell Protocol Monitoring
Error Log table.

Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it for each error
that has occurred sinc…
Indexes
IF-MIBifIndex atmfM4CellProtoErrorCode
Column Syntax OID
atmfM4CellProtoErrorCode
Indicates the type of error for which this entry contains
information. The range and interpretation of this error
code value is left up to the individual agent implementor.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.17.1.1
atmfM4CellProtoErrorTime
Value of sysUpTime when the error occurred.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.353.5.1.3.1.1.17.1.2
atmfM4CellProtoErrorReason
The cell header abnormality type: the reason for discarding
the ATM cell (i.e., unassigned VPI/VCI value or VPI/VCI
value out of range).
Enumeration
Enumerated Values:
1unassignedVpiVciValue
2outOfRangeVpiVciValue
 .1.3.6.1.4.1.353.5.1.3.1.1.17.1.3
atmfM4CellProtoErrorVpi
The VPI value of the discarded cell.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.353.5.1.3.1.1.17.1.4
atmfM4CellProtoErrorVci
The VCI value of the discarded cell.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.353.5.1.3.1.1.17.1.5

atmfM4TcProtoCurrTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.18 · 1 row entry · 4 columns
Open in standard view 
The ATM Forum M4 TC Adapter Protocol Monitoring Current
Data table.
          
This table maintains per-interface statistics for the
fifteen-minute interval currently being collected.
atmfM4TcProtoCurrEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.18.1
An entry in the ATM Forum M4 TC Adapter Protocol Monitoring
Current Data table.

Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it.
Indexes
IF-MIBifIndex
Column Syntax OID
atmfM4TcProtoCurrSuspect
If true, the statistics in this entry may be unreliable.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.18.1.1
atmfM4TcProtoCurrElapsedTime
Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted.
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.18.1.2
atmfM4TcProtoCurrSupprIntvls
This attribute is non-zero only if the ATM NE is
suppressing ATM TC Adapter Protocol Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.
…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.18.1.3
atmfM4TcProtoCurrDiscardHECViol
The number of ATM cells discarded on this interface, due to
a HEC violation, since the start of this interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.18.1.4

atmfM4TcProtoHistTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.19 · 1 row entry · 5 columns
Open in standard view 
The ATM Forum M4 TC Adapter Protocol Monitoring History
Data table.
          
This table maintains per-interface statistics for previous
fifteen-minute intervals.
atmfM4TcProtoHistEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.19.1
An entry in the ATM Forum M4 TC Adapter Protocol Monitoring
History Data table.

Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it for each fifteen-
minute int…
Indexes
IF-MIBifIndex atmfM4TcProtoHistIndex
Column Syntax OID
atmfM4TcProtoHistIndex
A number between 1 and 96, which identifies the interval
for which the set of statistics in this entry was
collected.

The interval identified by 1 is the most recently completed
15 minute interval, and th…
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.353.5.1.3.1.1.19.1.1
atmfM4TcProtoHistSuspect
If true, the statistics in this entry may be unreliable.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.19.1.2
atmfM4TcProtoHistElapsedTime
Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted.
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.19.1.3
atmfM4TcProtoHistSupprIntvls
This attribute is non-zero only if the ATM NE is
suppressing ATM Cell Protocol Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.

When …
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.19.1.4
atmfM4TcProtoHistDiscardHECViol
The number of ATM cells discarded on this interface, due to
a HEC violation, during this interval.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.19.1.5

atmfM4VpUpcNpcCurrTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.20 · 1 row entry · 7 columns
Open in standard view 
The ATM Forum M4 UPC/NPC Disagreement Monitoring Current
Data table for VPL termination points.
          
This table maintains per-TP statistics for the
fifteen-minute interval currently being collected.
atmfM4VpUpcNpcCurrEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.20.1
An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring Current Data table for VPL termination points.

Each VPL Termination Point automatically has
an entry in this table associated with it.
Indexes
IF-MIBifIndex ATM-MIBatmVplVpi
Column Syntax OID
atmfM4VpUpcNpcCurrSuspect
If true, the statistics in this entry may be unreliable.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.20.1.1
atmfM4VpUpcNpcCurrElapsedTime
Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted.
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.20.1.2
atmfM4VpUpcNpcCurrSupprIntvls
This attribute is non-zero only if the ATM NE is
suppressing UPC/NPC Disagreement Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.

Wh…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.20.1.3
atmfM4VpUpcNpcCurrDiscardedCells
The number of discarded cells due to combined CLP=0 and
CLP=1 UPC/NPC policing.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.20.1.4
atmfM4VpUpcNpcCurrDiscardedClp0
The number of discarded CLP=0 cells due to CLP=0 only
UPC/NPC policing.

This object shall be present only if CLP=0 traffic is
separately policed.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.20.1.5
atmfM4VpUpcNpcCurrPassedCells
The number of cells that have been successfully passed by
the combined CLP=0 and CLP=1 UPC/NPC policing.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.20.1.6
atmfM4VpUpcNpcCurrPassedClp0
The number of CLP=0 cells that have been successfully
passed by the CLP=0 UPC/NPC policing.

This object shall be present only if CLP=0 traffic is
separately policed.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.20.1.7

atmfM4VpUpcNpcHistTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.21 · 1 row entry · 8 columns
Open in standard view 
The ATM Forum M4 UPC/NPC Disagreement Monitoring History
Data table for VPL termination points.
          
This table maintains per-interface statistics for previous
fifteen-minute intervals.
atmfM4VpUpcNpcHistEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.21.1
An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring History Data table for VPL termination points.

Each VPL Termination Point automatically has
an entry in this table associated with it.
Indexes
IF-MIBifIndex ATM-MIBatmVplVpi atmfM4VpUpcNpcHistIndex
Column Syntax OID
atmfM4VpUpcNpcHistIndex
A number between 1 and 96, which identifies the interval
for which the set of statistics in this entry was
collected.

The interval identified by 1 is the most recently completed
15 minute interval, and th…
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.353.5.1.3.1.1.21.1.1
atmfM4VpUpcNpcHistSuspect
If true, the statistics in this entry may be unreliable.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.21.1.2
atmfM4VpUpcNpcHistElapsedTime
Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted.
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.21.1.3
atmfM4VpUpcNpcHistSupprIntvls
This attribute is non-zero only if the ATM NE is
suppressing UPC/NPC Disagreement Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.

Wh…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.21.1.4
atmfM4VpUpcNpcHistDiscardedCells
The number of discarded cells due to combined CLP=0 and
CLP=1 UPC/NPC policing.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.21.1.5
atmfM4VpUpcNpcHistDiscardedClp0
The number of discarded CLP=0 cells due to CLP=0 only
UPC/NPC policing.

This object shall be present only if CLP=0 traffic is
separately policed.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.21.1.6
atmfM4VpUpcNpcHistPassedCells
The number of cells that have been successfully passed by
the combined CLP=0 and CLP=1 UPC/NPC policing.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.21.1.7
atmfM4VpUpcNpcHistPassedClp0
The number of CLP=0 cells that have been successfully
passed by the CLP=0 UPC/NPC policing.

This object shall be present only if CLP=0 traffic is
separately policed.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.21.1.8

atmfM4VcUpcNpcCurrTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.22 · 1 row entry · 7 columns
Open in standard view 
The ATM Forum M4 UPC/NPC Disagreement Monitoring Current
Data table for VCL termination points.
          
This table maintains per-TP statistics for the
fifteen-minute interval currently being collected.
atmfM4VcUpcNpcCurrEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.22.1
An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring Current Data table for VCL termination points.

Each VCL Termination Point automatically has
an entry in this table associated with it.
Indexes
IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci
Column Syntax OID
atmfM4VcUpcNpcCurrSuspect
If true, the statistics in this entry may be unreliable.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.22.1.1
atmfM4VcUpcNpcCurrElapsedTime
Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted.
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.22.1.2
atmfM4VcUpcNpcCurrSupprIntvls
This attribute is non-zero only if the ATM NE is
suppressing UPC/NPC Disagreement Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.

Wh…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.22.1.3
atmfM4VcUpcNpcCurrDiscardedCells
The number of discarded cells due to combined CLP=0 and
CLP=1 UPC/NPC policing.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.22.1.4
atmfM4VcUpcNpcCurrDiscardedClp0
The number of discarded CLP=0 cells due to CLP=0 only
UPC/NPC policing.

This object shall be present only if CLP=0 traffic is
separately policed.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.22.1.5
atmfM4VcUpcNpcCurrPassedCells
The number of cells that have been successfully passed by
the combined CLP=0 and CLP=1 UPC/NPC policing.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.22.1.6
atmfM4VcUpcNpcCurrPassedClp0
The number of CLP=0 cells that have been successfully
passed by the CLP=0 UPC/NPC policing.

This object shall be present only if CLP=0 traffic is
separately policed.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.22.1.7

atmfM4VcUpcNpcHistTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.23 · 1 row entry · 8 columns
Open in standard view 
The ATM Forum M4 UPC/NPC Disagreement Monitoring History
Data table for VCL termination points.
          
This table maintains per-interface statistics for previous
fifteen-minute intervals.
atmfM4VcUpcNpcHistEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.23.1
An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring History Data table for VCL termination points.

Each VCL Termination Point automatically has
an entry in this table associated with it.
Indexes
IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci atmfM4VcUpcNpcHistIndex
Column Syntax OID
atmfM4VcUpcNpcHistIndex
A number between 1 and 96, which identifies the interval
for which the set of statistics in this entry was
collected.

The interval identified by 1 is the most recently completed
15 minute interval, and th…
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.353.5.1.3.1.1.23.1.1
atmfM4VcUpcNpcHistSuspect
If true, the statistics in this entry may be unreliable.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.23.1.2
atmfM4VcUpcNpcHistElapsedTime
Amount of time, measured in units of 0.01 second, that
statistics for this entry (the current interval) have been
counted.
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.23.1.3
atmfM4VcUpcNpcHistSupprIntvls
This attribute is non-zero only if the ATM NE is
suppressing UPC/NPC Disagreement Monitoring History Data
entry creation when the current interval terminates with
'all-zeroes' performance measurements.

Wh…
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.23.1.4
atmfM4VcUpcNpcHistDiscardedCells
The number of discarded cells due to combined CLP=0 and
CLP=1 UPC/NPC policing.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.23.1.5
atmfM4VcUpcNpcHistDiscardedClp0
The number of discarded CLP=0 cells due to CLP=0 only
UPC/NPC policing.

This object shall be present only if CLP=0 traffic is
separately policed.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.23.1.6
atmfM4VcUpcNpcHistPassedCells
The number of cells that have been successfully passed by
the combined CLP=0 and CLP=1 UPC/NPC policing.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.23.1.7
atmfM4VcUpcNpcHistPassedClp0
The number of CLP=0 cells that have been successfully
passed by the CLP=0 UPC/NPC policing.

This object shall be present only if CLP=0 traffic is
separately policed.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.23.1.8

atmfM4VpTestTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.25 · 1 row entry · 7 columns
Open in standard view 
The ATM Forum M4 VP Termination Point Test table.
This table allows tests to be run on VPL and VPC
termination points.
          
The operation of this table is entirely analogous to
that of the ifTestTable in RFC 1573 (which was later
deprecated in RFC 2233), except that the indexes into
this table are different.
atmfM4VpTestEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.25.1
An entry containing objects for invoking tests on a
VPL or VPC termination point.
Indexes
IF-MIBifIndex ATM-MIBatmVplVpi atmfM4VpTestObject
Column Syntax OID
atmfM4VpTestObject
Specifies whether the test applies to the VPL termination
point with the specified VPI, or the VPC termination point.
Enumeration
Enumerated Values:
1vplTp
2vpcTp
 .1.3.6.1.4.1.353.5.1.3.1.1.25.1.1
atmfM4VpTestId
This object identifies the current invocation of the
interface's test.
SNMPv2-TCTestAndIncrr/w
Textual Convention: SNMPv2-TCTestAndIncr Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.25.1.2
atmfM4VpTestStatus
This object indicates whether or not some manager
currently has the necessary 'ownership' required to
invoke a test on this interface. A write to this
object is only successful when it changes its value
from 'notInUse(…
Enumerationr/w
Enumerated Values:
1notInUse
2inUse
 .1.3.6.1.4.1.353.5.1.3.1.1.25.1.3
atmfM4VpTestType
A control variable used to start and stop operator-
initiated interface tests. Most OBJECT IDENTIFIER
values assigned to tests are defined elsewhere, in
association with specific types of interface.
However, this docum…
SNMPv2-TCAutonomousTyper/w
Textual Convention: SNMPv2-TCAutonomousType ObjectIdentifier
 .1.3.6.1.4.1.353.5.1.3.1.1.25.1.4
atmfM4VpTestResult
This object contains the result of the most recently
requested test, or the value none(1) if no tests have
been requested since the last reset. Note that this
facility provides no provision for saving the results
of on…
Enumeration
Enumerated Values:
1none
2success
3inProgress
4notSupported
5unAbleToRun
6aborted
7failed
 .1.3.6.1.4.1.353.5.1.3.1.1.25.1.5
atmfM4VpTestCode
This object contains a code which contains more
specific information on the test result, for example
an error-code after a failed test. Error codes and
other values this object may take are specific to the
type of inte…
ObjectIdentifier .1.3.6.1.4.1.353.5.1.3.1.1.25.1.6
atmfM4VpTestOwner
The entity which currently has the 'ownership'
required to invoke a test on this interface.
IF-MIBOwnerStringr/w
Textual Convention: IF-MIBOwnerString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.353.5.1.3.1.1.25.1.7

atmfM4VcTestTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.26 · 1 row entry · 7 columns
Open in standard view 
The ATM Forum M4 VC Termination Point Test table.
This table allows tests to be run on VCL and VCC
termination points.
          
The operation of this table is entirely analogous to
that of the ifTestTable in RFC 1573 (which was later
deprecated in RFC 2233), except that the indexes into
this table are different.
atmfM4VcTestEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.26.1
An entry containing objects for invoking tests on a
VCL or VCC termination point.
Indexes
IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci atmfM4VcTestObject
Column Syntax OID
atmfM4VcTestObject
Specifies whether the test applies to the VCL termination
point with the specified VPI and VCI values, or to the VCC
termination point.
Enumeration
Enumerated Values:
1vclTp
2vccTp
 .1.3.6.1.4.1.353.5.1.3.1.1.26.1.1
atmfM4VcTestId
This object identifies the current invocation of the
interface's test.
SNMPv2-TCTestAndIncrr/w
Textual Convention: SNMPv2-TCTestAndIncr Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.26.1.2
atmfM4VcTestStatus
This object indicates whether or not some manager
currently has the necessary 'ownership' required to
invoke a test on this interface. A write to this
object is only successful when it changes its value
from 'notInUse(…
Enumerationr/w
Enumerated Values:
1notInUse
2inUse
 .1.3.6.1.4.1.353.5.1.3.1.1.26.1.3
atmfM4VcTestType
A control variable used to start and stop operator-
initiated interface tests. Most OBJECT IDENTIFIER
values assigned to tests are defined elsewhere, in
association with specific types of interface.
However, this docum…
SNMPv2-TCAutonomousTyper/w
Textual Convention: SNMPv2-TCAutonomousType ObjectIdentifier
 .1.3.6.1.4.1.353.5.1.3.1.1.26.1.4
atmfM4VcTestResult
This object contains the result of the most recently
requested test, or the value none(1) if no tests have
been requested since the last reset. Note that this
facility provides no provision for saving the results
of on…
Enumeration
Enumerated Values:
1none
2success
3inProgress
4notSupported
5unAbleToRun
6aborted
7failed
 .1.3.6.1.4.1.353.5.1.3.1.1.26.1.5
atmfM4VcTestCode
This object contains a code which contains more
specific information on the test result, for example
an error-code after a failed test. Error codes and
other values this object may take are specific to the
type of inte…
ObjectIdentifier .1.3.6.1.4.1.353.5.1.3.1.1.26.1.6
atmfM4VcTestOwner
The entity which currently has the 'ownership'
required to invoke a test on this termination point.
IF-MIBOwnerStringr/w
Textual Convention: IF-MIBOwnerString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.353.5.1.3.1.1.26.1.7

atmfM4EquipTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.28 · 1 row entry · 7 columns
Open in standard view 
The ATM Forum M4 Equipment table.  This table augments the
entPhysicalTable.
atmfM4EquipEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.28.1
An entry in the ATM Forum M4 Equipment table. Each entry
of this table represents a piece of equipment within the ATM
NE that neither is nor accepts a replaceable plug-in unit.
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
atmfM4EquipAdminStatus
Used by the administrator to lock and unlock the object.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.353.5.1.3.1.1.28.1.1
atmfM4EquipLocation
The specific or general location of the component.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.353.5.1.3.1.1.28.1.2
atmfM4EquipOperStatus
This attributes identifies whether or not the component is
capable of performing its normal functions.
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.353.5.1.3.1.1.28.1.3
atmfM4EquipVendor
The vendor of the component.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.353.5.1.3.1.1.28.1.4
atmfM4EquipVersion
The version of the component.
SNMPv2-TCAutonomousType
Textual Convention: SNMPv2-TCAutonomousType ObjectIdentifier
 .1.3.6.1.4.1.353.5.1.3.1.1.28.1.5
atmfM4EquipUserLabel
A user-friendly name for the piece of equipment. The
default value of this object is the null string.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.353.5.1.3.1.1.28.1.6
atmfM4EquipAlarmSeverityIndex
An index into the alarm severity profile table, specifying
the severity assignments for M4 alarms reported for this
component. The default value of this object is zero.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.28.1.7

atmfM4EquipHolderTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.29 · 1 row entry · 4 columns
Open in standard view 
The ATM Forum M4 Equipment Holder table.  This table
augments the entPhysicalTable.
atmfM4EquipHolderEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.29.1
An entry in the ATM Forum M4 Equipment Holder table. Each
entry of this table represents a component within the ATM NE
that accepts a replaceable plug-in unit.
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
atmfM4EquipHolderType
The type of the component.
Enumeration
Enumerated Values:
1rack
2shelf
3drawer
4slot
 .1.3.6.1.4.1.353.5.1.3.1.1.29.1.1
atmfM4EquipHolderAcceptableTypes
The types of plug-in units that can be supported by the
slot, separated by newline characters.

This attribute shall be present only when the Equipment
Holder represents a slot.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.353.5.1.3.1.1.29.1.2
atmfM4EquipHolderSlotStatus
This attributes identifies whether or not a plug-in unit is
present in the slot.

This attribute shall be present only when the Equipment
Holder represents a slot.
Enumeration
Enumerated Values:
1empty
2full
 .1.3.6.1.4.1.353.5.1.3.1.1.29.1.3
atmfM4EquipHolderSwLoad
An index into the installed software table, specifying
the software that is to be loaded into the plug-in unit
whenever an automatic reload of software is needed.

This attribute shall be present only when…
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.29.1.4

atmfM4PlugInUnitTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.30 · 1 row entry · 6 columns
Open in standard view 
The ATM Forum M4 Plug-In Unit table.  This table augments
the entPhysicalTable.
atmfM4PlugInUnitEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.30.1
An entry in the ATM Forum M4 Plug-In Unit table. Each
entry of this table represents a piece of equipment within
the ATM NE that is inserted into and removed from an
Equipment Holder.
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
atmfM4PlugInUnitAdminStatus
Used by the administrator to lock and unlock the object.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.353.5.1.3.1.1.30.1.1
atmfM4PlugInUnitAvailStatus
Provides further information regarding the state of the
component.
Enumeration
Enumerated Values:
1available
2inTest
3failed
4powerOff
5notInstalled
6offLine
7dependency
 .1.3.6.1.4.1.353.5.1.3.1.1.30.1.2
atmfM4PlugInUnitOperStatus
This attributes identifies whether or not the component is
capable of performing its normal functions.
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.353.5.1.3.1.1.30.1.3
atmfM4PlugInUnitVendor
The vendor of the component.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.353.5.1.3.1.1.30.1.4
atmfM4PlugInUnitVersion
The version of the component.
SNMPv2-TCAutonomousType
Textual Convention: SNMPv2-TCAutonomousType ObjectIdentifier
 .1.3.6.1.4.1.353.5.1.3.1.1.30.1.5
atmfM4PlugInUnitAlarmSeverityIndex
An index into the alarm severity profile table, specifying
the severity assignments for M4 alarms reported for this
component. The default value of this object is zero.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.30.1.6

atmfM4HwRunningSwTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.32 · 1 row entry · 3 columns
Open in standard view 
The ATM Forum M4 Hardware Unit/Running Software
relationship table.  This table describes the software that
is running on each hardware unit in the ATM NE.
atmfM4HwRunningSwEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.32.1
An entry in the ATM Forum M4 Hardware Unit/Running Software
relationship table. Each entry of this table identifies an
entry in the entPhysicalTable and one in the hrSWRunTable.
Indexes
atmfM4HwRunningSwHwIndex atmfM4HwRunningSwIndex
Column Syntax OID
atmfM4HwRunningSwHwIndex
The index, in the entPhysicalTable, of the containing
hardware unit in this pair.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.32.1.1
atmfM4HwRunningSwIndex
A unique number within the context of the containing
hardware unit.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.32.1.2
atmfM4HwRunningSwSwIndex
The index, in the hrSWRunTable, of the software product
represented by this entry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.32.1.3

atmfM4HwInstalledSwTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.33 · 1 row entry · 4 columns
Open in standard view 
The ATM Forum M4 Hardware Unit/Installed Software
relationship table.  This table describes the software that
is installed on each hardware unit in the ATM NE.
atmfM4HwInstalledSwEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.33.1
An entry in the ATM Forum M4 Hardware Unit/Installed
Software relationship table. Each entry of this table
identifies an entry in the entPhysicalTable and one in
the hrSWInstalledTable.
Indexes
atmfM4HwInstalledSwHwIndex atmfM4HwInstalledSwIndex
Column Syntax OID
atmfM4HwInstalledSwHwIndex
The index, in the entPhysicalTable, of the containing
physical entity in this pair.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.33.1.1
atmfM4HwInstalledSwIndex
A unique number within the context of the containing
hardware unit.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.33.1.2
atmfM4HwInstalledSwSwIndex
The index, in the hrSWInstalledTable, of the software
product represented by this entry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.33.1.3
atmfM4HwSwAlarmSeverityIndex
An index into the alarm severity profile table, specifying
the severity assignments for M4 alarms reported for this
piece of software installed on the hardware unit. The
default value of this object is zero.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.33.1.4

atmfM4AlarmSevProfileTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.36 · 1 row entry · 2 columns
Open in standard view 
The ATM Forum M4 alarm severity profile table.
This table specifies which profiles exist. Creating
or deleting an entry in this table automatically
creates or deletes the corresponding entries in the
atmfM4AlarmSeverityTable.
atmfM4AlarmSevProfileEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.36.1
A group of severities, one for each alarm type in
the communications alarm group.
Indexes
atmfM4AlarmSevProfileIndex
Column Syntax OID
atmfM4AlarmSevProfileIndex
A number identifying this alarm severity profile.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.36.1.1
atmfM4AlarmSevProfileRowStatus
This object is used to create a new row or to delete
an existing row in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.353.5.1.3.1.1.36.1.2

atmfM4AlarmSevTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.37 · 1 row entry · 2 columns
Open in standard view 
The ATM Forum M4 alarm severity table.
This table associates profile index and trap
ID pairs with severities to be used for
M4 alarm traps that have occurred.
(Note that this table does not apply to cleared alarms.)
atmfM4AlarmSevEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.37.1
An entry in this table associates an alarm severity
profile index/trap ID pair with a severity.
Deleting a particular profile's row in the alarm severity
profile table deletes all rows in this table with the
same profil…
Indexes
atmfM4AlarmSevProfileIndex atmfM4AlarmSevTrapId
Column Syntax OID
atmfM4AlarmSevTrapId
The ID of the trap type to which this entry applies.
ObjectIdentifier .1.3.6.1.4.1.353.5.1.3.1.1.37.1.1
atmfM4AlarmSeverity
The severity to be used for this trap type when the TrapId
is selected.
If no value for this object has ever been set since
the corresponding profile was created, the agent should
return the value of the object atmfM4Al…
AtmfM4AlarmSeverityr/w
Textual Convention: AtmfM4AlarmSeverity Enumeration
Type Values:
0indeterminate
1critical
2major
3minor
4warning
 .1.3.6.1.4.1.353.5.1.3.1.1.37.1.2

atmfM4TrapForwardingTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.39 · 1 row entry · 8 columns
Open in standard view 
The ATM Forum M4 Trap forwarding discriminator
table.
This table specifies which traps will be sent to
which management system.
atmfM4TrapForwardingEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.39.1
Information about a group of traps to be sent to
a particular IP address.

A new entry must have values for all attributes that
do not have default values before its RowStatus column
can be set to active(1).
Indexes
atmfM4TrapForwardingIndex
Column Syntax OID
atmfM4TrapForwardingIndex
A unique number identifying the table entry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.39.1.1
atmfM4TrapForwardingDest
The IP address to which traps identified by this
table entry should be sent.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.353.5.1.3.1.1.39.1.2
atmfM4ForwardedTrapId
The ID of the trap type to which this entry applies.
ObjectIdentifierr/w .1.3.6.1.4.1.353.5.1.3.1.1.39.1.3
atmfM4ForwardedTrapObject
The object to which this entry applies.
By convention, this is the name of the first object in
the row in the table referenced.

The special value { 0 0 } indicates that
traps of this type from all objects…
SNMPv2-TCRowPointerr/w
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.4.1.353.5.1.3.1.1.39.1.4
atmfM4TrapForwardingPort
The UDP port on the specified management system to
which traps identified by this entry should be sent.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.39.1.5
atmfM4LowestForwardedSeverity
The lowest severity of traps of this type from
the specified object that should be sent to this
address.
This object has significance only if the trap type
specified has a severity associated with it.
AtmfM4AlarmSeverityr/w
Textual Convention: AtmfM4AlarmSeverity Enumeration
Type Values:
0indeterminate
1critical
2major
3minor
4warning
 .1.3.6.1.4.1.353.5.1.3.1.1.39.1.6
atmfM4ForwardedIndeterminate
When this object has the value TRUE, traps with
indeterminate severity will be forwarded to the
specified event.
This object has significance only if the trap type
specified has a severity associated with it.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.39.1.7
atmfM4TrapForwardingRowStatus
This object is used to create a new row or to delete
an existing row in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.353.5.1.3.1.1.39.1.8

atmfM4TrapLogTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.40 · 1 row entry · 6 columns
Open in standard view 
The ATM Forum M4 Trap Agent log table.
This table defines the trap logs currently maintained
by the agent.
The management system creates entries in this table to
specify which types of traps, from which ATM network
elements, should be logged.
Deleting an entry in this table deletes all entries in
the corresponding log.
atmfM4TrapLogEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.40.1
Information about a single trap log.
Indexes
atmfM4TrapLogSrc atmfM4TrapLogType
Column Syntax OID
atmfM4TrapLogSrc
The IP address of the SNMP agent whose traps are
stored in this log.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.353.5.1.3.1.1.40.1.1
atmfM4TrapLogType
The type of traps stored in this log.
Enumeration
Enumerated Values:
1objectCreated
2objectDeleted
3configChange
4stateChange
5alarm
 .1.3.6.1.4.1.353.5.1.3.1.1.40.1.2
atmfM4TrapLogAdminStatus
The management system uses this object to stop and
start the operations of this object.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.353.5.1.3.1.1.40.1.3
atmfM4TrapLogOperStatus
Indicates whether or not the log is capable of
performing its normal operations.
Enumeration
Enumerated Values:
1up
2down
3logFull
 .1.3.6.1.4.1.353.5.1.3.1.1.40.1.4
atmfM4TrapLogFullAction
Indicates the action that should be performed when no
more log entries can be created due to a log-full
condition. If the value of this object is wrap(2),
each new log entry will cause the deletion of the oldest
entry …
Enumerationr/w
Enumerated Values:
1halt
2wrap
 .1.3.6.1.4.1.353.5.1.3.1.1.40.1.5
atmfM4TrapLogRowStatus
This object is used to create a new row or to delete
an existing row in the table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.353.5.1.3.1.1.40.1.6

atmfM4LoggedTrapTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.41 · 1 row entry · 5 columns
Open in standard view 
The ATM Forum M4 Trap Agent logged trap table.
This table is used to maintain the traps logged.
atmfM4LoggedTrapEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.41.1
Information about a single trap in the log.
Entries in this table are created automatically but
can be deleted by the management system.
Entries that represent 'alarm' log types are augmented
by the atmfM4LoggedAlarmEnt…
Indexes
atmfM4TrapLogSrc atmfM4TrapLogType atmfM4LoggedTrapIndex
Column Syntax OID
atmfM4LoggedTrapIndex
A unique number identifying this entry in the log.
When the maximum value for this object has been reached,
it will wrap around to 0.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.1.3.1.1.41.1.1
atmfM4LoggedTrapTime
The time at which this trap was logged.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.353.5.1.3.1.1.41.1.2
atmfM4LoggedTrapID
The type of trap to which this entry applies.
Together with the logged trap ID object, this object
specifies the entity to which this logged trap referred.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.1.3.1.1.41.1.3
atmfM4LoggedTrapObject
The object to which this entry applies.
By convention, this is the name of the first object in
the row in the table referenced.
Together with the logged trap ID object, this object
specifies the entity to which this log…
SNMPv2-TCRowPointer
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.4.1.353.5.1.3.1.1.41.1.4
atmfM4LoggedTrapRowStatus
This object is used to delete an existing row in the
table. Note that the only value to which a management
system can set this object is destroy(6).
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.353.5.1.3.1.1.41.1.5

atmfM4LoggedAlarmTable

table
.1.3.6.1.4.1.353.5.1.3.1.1.42 · 1 row entry · 5 columns
Open in standard view 
The ATM Forum M4 Trap Agent logged alarm trap table.
This table is used to maintain extra information for
logged traps that represent alarm types.
atmfM4LoggedAlarmEntry entry .1.3.6.1.4.1.353.5.1.3.1.1.42.1
Information about the alarm-specific attributes of
a single trap in the log.
Indexes
atmfM4TrapLogSrc atmfM4TrapLogType atmfM4LoggedTrapIndex
Column Syntax OID
atmfM4LoggedAlarmSeverity
The perceived severity of the alarm, as specified by
the agent that generated it.
AtmfM4AlarmLogSeverity
Textual Convention: AtmfM4AlarmLogSeverity Enumeration
Type Values:
-1cleared
0indeterminate
1critical
2major
3minor
4warning
 .1.3.6.1.4.1.353.5.1.3.1.1.42.1.1
atmfM4LoggedAlarmBackedUp
If the value of this object is true, the agent reported
in this trap that the failed object had been backed up.

This object is only present if it was included in the
alarm trap corresponding to this log e…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.353.5.1.3.1.1.42.1.2
atmfM4LoggedAlarmBUObject
Indicates the object that provided back-up services to
the failed object.

This object is only present if it was included in the
alarm trap corresponding to this log entry.
SNMPv2-TCRowPointer
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
 .1.3.6.1.4.1.353.5.1.3.1.1.42.1.3
atmfM4LoggedAlarmSpecificProb
Indicates further refinements to the problem identified
by the alarm type. If more than one specific problem
is described in this object, the problem descriptions are
separated by newline characters.

Thi…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.353.5.1.3.1.1.42.1.4
atmfM4LoggedAlarmRepairAct
Indicates proposed repair actions reported by the agent
for the problem identified by the alarm. If more than
one action is described in this object, the problem
descriptions are separated by newline characters.
…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.353.5.1.3.1.1.42.1.5