atmfM4AlarmSevProfileTable
ATM-FORUM-SNMP-M4-MIB ·
.1.3.6.1.4.1.353.5.1.3.1.1.36
Object
table
The ATM Forum M4 alarm severity profile table. This table specifies which profiles exist. Creating or deleting an entry in this table automatically creates or deletes the corresponding entries in the atmfM4AlarmSeverityTable.
Context
- MIB
- ATM-FORUM-SNMP-M4-MIB
- OID
.1.3.6.1.4.1.353.5.1.3.1.1.36- Type
- table
- Status
- current
- Parent
- atmfM4MIBObjects
- Siblings
- 44
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmfM4NeVendor The vendor of the ATM network element. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.1 |
| atmfM4VclTable The ATM Forum M4 VCL Termination Point Configuration
table extensions. This table augments the VCL
configuration table in RFC 1695. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.10 |
| atmfM4VpXConnTable The ATM Forum M4 VP Cross-Connect Configuration
table extensions. This table augments the VP Cross-Connect
configuration table in RFC 1695. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.11 |
| atmfM4VcXConnTable The ATM Forum M4 VC Cross-Connect Configuration
table extensions. This table augments the VC Cross-Connect
configuration table in RFC 1695. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.12 |
| atmfM4VpNextVpiTable The ATM Forum M4 VP Next VPI value table. This optional
table supplies unused VPI values for use in creating
entries in the atmVplTable. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.13 |
| atmfM4VcNextVciTable The ATM Forum M4 VC Next VCI value table. This optional
table supplies unused VCI values for use in creating
entries in the atmVclTable. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.14 |
| atmfM4CellProtoCurrTable The ATM Forum M4 Cell Protocol Monitoring Current Data
table.
This table maintains per-interface statistics for the
fifteen-minute interval currently being collected. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.15 |
| atmfM4CellProtoHistTable The ATM Forum M4 Cell Protocol Monitoring History Data
table.
This table maintains per-interface statistics for previous
fifteen-minute intervals. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.16 |
| atmfM4CellProtoErrorTable The ATM Forum M4 Cell Protocol Monitoring Error Log
table.
This table maintains a record of the last error of each
type encountered on each interface, as a result of AT… | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.17 |
| atmfM4TcProtoCurrTable The ATM Forum M4 TC Adapter Protocol Monitoring Current
Data table.
This table maintains per-interface statistics for the
fifteen-minute interval currently being collec… | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.18 |
| atmfM4TcProtoHistTable The ATM Forum M4 TC Adapter Protocol Monitoring History
Data table.
This table maintains per-interface statistics for previous
fifteen-minute intervals. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.19 |
| atmfM4NeVersion The version of the ATM network element. | scalar | SNMPv2-TCAutonomousType | .1.3.6.1.4.1.353.5.1.3.1.1.2 |
| atmfM4VpUpcNpcCurrTable The ATM Forum M4 UPC/NPC Disagreement Monitoring Current
Data table for VPL termination points.
This table maintains per-TP statistics for the
fifteen-minute interval c… | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.20 |
| atmfM4VpUpcNpcHistTable The ATM Forum M4 UPC/NPC Disagreement Monitoring History
Data table for VPL termination points.
This table maintains per-interface statistics for previous
fifteen-minut… | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.21 |
| atmfM4VcUpcNpcCurrTable The ATM Forum M4 UPC/NPC Disagreement Monitoring Current
Data table for VCL termination points.
This table maintains per-TP statistics for the
fifteen-minute interval c… | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.22 |
| atmfM4VcUpcNpcHistTable The ATM Forum M4 UPC/NPC Disagreement Monitoring History
Data table for VCL termination points.
This table maintains per-interface statistics for previous
fifteen-minut… | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.23 |
| atmfM4TestTypes | node | - | .1.3.6.1.4.1.353.5.1.3.1.1.24 |
| atmfM4VpTestTable The ATM Forum M4 VP Termination Point Test table.
This table allows tests to be run on VPL and VPC
termination points.
The operation of this table is entirely analogous… | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.25 |
| atmfM4VcTestTable The ATM Forum M4 VC Termination Point Test table.
This table allows tests to be run on VCL and VCC
termination points.
The operation of this table is entirely analogous… | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.26 |
| atmfM4EquipTable The ATM Forum M4 Equipment table. This table augments the
entPhysicalTable. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.28 |
| atmfM4EquipHolderTable The ATM Forum M4 Equipment Holder table. This table
augments the entPhysicalTable. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.29 |
| atmfM4NeStartTime The time at which the agent was last started; in other
words, the time at which sysUpTime was zero. | scalar | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.353.5.1.3.1.1.3 |
| atmfM4PlugInUnitTable The ATM Forum M4 Plug-In Unit table. This table augments
the entPhysicalTable. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.30 |
| atmfM4HwRunningSwTable The ATM Forum M4 Hardware Unit/Running Software
relationship table. This table describes the software that
is running on each hardware unit in the ATM NE. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.32 |
| atmfM4HwInstalledSwTable The ATM Forum M4 Hardware Unit/Installed Software
relationship table. This table describes the software that
is installed on each hardware unit in the ATM NE. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.33 |
| atmfM4AlarmSevDefault The default severity value used for new profile
index/trap ID pairs that have not yet been modified.
This value is also used whenever an object's alarm
severity profile index is s… | scalar | AtmfM4AlarmSeverity | .1.3.6.1.4.1.353.5.1.3.1.1.34 |
| atmfM4AlarmSevProfileIndexNext This object contains an appropriate value to be used for
atmfM4AlarmSevProfileIndex when creating entries in the
atmfM4AlarmSevProfileTable.
The value -1 indicates that… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.353.5.1.3.1.1.35 |
| atmfM4AlarmSevTable The ATM Forum M4 alarm severity table.
This table associates profile index and trap
ID pairs with severities to be used for
M4 alarm traps that have occurred.
(Note that this tabl… | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.37 |
| atmfM4ForwardAllTraps This is used as the value of the object
atmfM4ForwardedTrapObject when traps from all objects
are to be forwarded, or when there is only one
object of the type that forwards the s… | node | - | .1.3.6.1.4.1.353.5.1.3.1.1.38 |
| atmfM4TrapForwardingTable The ATM Forum M4 Trap forwarding discriminator
table.
This table specifies which traps will be sent to
which management system. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.39 |
| atmfM4NeAlarmSeverityIndex An index into the alarm severity profile table, specifying
the severity assignments for M4 alarms reported for the
ATM network element. The default value for this object is
zero. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.353.5.1.3.1.1.4 |
| atmfM4TrapLogTable The ATM Forum M4 Trap Agent log table.
This table defines the trap logs currently maintained
by the agent.
The management system creates entries in this table to
specify which typ… | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.40 |
| atmfM4LoggedTrapTable The ATM Forum M4 Trap Agent logged trap table.
This table is used to maintain the traps logged. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.41 |
| atmfM4LoggedAlarmTable The ATM Forum M4 Trap Agent logged alarm trap table.
This table is used to maintain extra information for
logged traps that represent alarm types. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.42 |
| atmfM4TrapAlarmSeverity The perceived severity of the alarm, as specified by
the agent that generated it. | scalar | AtmfM4AlarmLogSeverity | .1.3.6.1.4.1.353.5.1.3.1.1.43 |
| atmfM4TrapAlarmBackedUp If the value of this object is true, the failed object
has been backed up. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.44 |
| atmfM4TrapAlarmBUObject Indicates the object that provided back-up services to
the failed object. | scalar | SNMPv2-TCRowPointer | .1.3.6.1.4.1.353.5.1.3.1.1.45 |
| atmfM4TrapAlarmSpecificProb Indicates further refinements to the problem identified
by the alarm type. If more than one specific problem
is described in this object, the problem descriptions are
separated b… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.46 |
| atmfM4TrapAlarmRepairAct Indicates proposed repair actions reported by the agent
for the problem identified by the alarm. If more than
one action is described in this object, the problem
descriptions are… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.353.5.1.3.1.1.47 |
| atmfM4NeSuppressZeroStats When the value of this object is true, no entry will be
created in any of the historical statistics tables for
intervals in which all counts are zero. The default value for
this … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.353.5.1.3.1.1.5 |
| atmfM4PhysPathTpTable The ATM Forum M4 interface Configuration table extensions
for the physical path termination point. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.6 |
| atmfM4TcAdapterTable The ATM Forum M4 interface Configuration table extensions
for the TC Adapter. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.7 |
| atmfM4AtmLayerTable The ATM Forum M4 interface Configuration table extensions
for the ATM cell layer. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.8 |
| atmfM4VplTable The ATM Forum M4 VPL Termination Point Configuration
table extensions. This table augments the VPL
configuration table in RFC 1695. | table | - | .1.3.6.1.4.1.353.5.1.3.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmfM4AlarmSevProfileEntry A group of severities, one for each alarm type in
the communications alarm group. | row | - | .1.3.6.1.4.1.353.5.1.3.1.1.36.1 |