ALCATEL-ENT1-CHASSIS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
132

chasEntPhysicalTable

table
.1.3.6.1.4.1.6486.801.1.1.1.1.1.1 · 1 row entry · 35 columns
Open in standard view 
This table contains one row per physical entity. It is an extension for
the entity physical table (rfc 2737) that is instantiated for every physical entity
object. The fields are not always significant for every object.
chasEntPhysicalEntry entry .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1
Information about a particular physical entity.
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
chasEntPhysAdminStatus
All modules (even empty slots) are in unknown state when the chassis
first powers up.

Chassis status possible value:
powerOn <=> powered up

Control Module possible value:
powerOn <=> …
Enumerationr/w
Enumerated Values:
1unknown
2powerOff
3powerOn
4reset
5takeover
6resetAll
7standby
8resetWithFabric
9takeoverWithFabrc
10vcTakeover
11resetVcAll
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.1
chasEntPhysOperStatus
All modules (even empty slots) are in unknown state when the chassis
first powers up.

Chassis status possible value :
up <=> powered up

Control Module possible value :
notPr…
Enumeration
Enumerated Values:
1up
2down
3testing
4unknown
5secondary
6notPresent
7unpowered
8master
9idle
10pwrsave
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.2
chasEntPhysPower
This value is only applicable to the NI, PS and Control Modules. It
corresponds to a a static value for the power consumption of an NI
module or Control Module. This value is in Watts.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.3
chasEntPhysModuleType
This object is the unique Module Type or ID from the entities eeprom.
This value is guarrantteed to be unique to each type of Module.
This value is only intended for Alcatel internal use.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.4
chasEntPhysPartNumber
This object contains the Alcatel Part Number for the entity.
This value is used to identify what is
needed when placing orders with Alcatel.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.5
chasEntPhysLedStatusOk1
Chassis Management Module (CMM) front panel LED OK1 status indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.6
chasEntPhysLedStatusOk2
Chassis Management Module (CMM) front panel LED OK2 status indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.7
chasEntPhysLedStatusPrimaryCMM
Chassis Management Module (CMM) front panel LED Primary chassis indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.8
chasEntPhysLedStatusSecondaryCMM
Chassis Management Module (CMM) front panel LED Secondary chassis indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.9
chasEntPhysLedStatusTemperature
Chassis Management Module (CMM) front panel LED temperature status indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.10
chasEntPhysLedStatusFan
For Hawk stacks used as a fan group status LED. For eagle CMM's user instead:
Fan 1 (top left), Fan 2 (top right), Fan 3 (rear)
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.11
chasEntPhysLedStatusBackupPS
Chassis backup power supply status indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.12
chasEntPhysLedStatusInternalPS
Chassis internal power supply status indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.13
chasEntPhysLedStatusControl
Chassis control status
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.14
chasEntPhysLedStatusFabric
Chassis Management Module (CMM) Fabric status indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.15
chasEntPhysLedStatusPS
Chassis Power Supply Unit status indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.16
chasEntPhysAsic1Rev
This object contains the ASIC revision Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.17
chasEntPhysAsic2Rev
This object contains the ASIC revision Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.18
chasEntPhysAsic3Rev
This object contains the ASIC revision Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.19
chasEntPhysAsic4Rev
This object contains the ASIC revision Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.20
chasEntPhysAsic5Rev
This object contains the ASIC revision Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.21
chasEntPhysAsic6Rev
This object contains the ASIC revision Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.22
chasEntPhysCpldRev
This object contains the CPLD revision Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.23
chasEntPhysDaughterFpga1Rev
This object contains the daughter fpga revision Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.24
chasEntPhysDaughterFpga2Rev
This object contains the daughter fpga revision Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.25
chasEntPhysNiNum
This value is only applicable to the NI. It indicates an NI associated with this physicalEntry
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.26
chasEntPhysGbicNum
This value is only applicable to the NI. It indicates a gbic associated with this ni
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.27
chasEntPhysWaveLen
This object contains the wave length of a SFP device
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.28
chasEntPhysUbootRev
This object contains the uboot version Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.29
chasEntPhysUbootMinibootRev
This object contains the uboot miniboot version Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.30
chasEntPhysMacAddress
This object contains the MAC address of the ni entity
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.31
chasEntPhysCpuModel
This object contains the model description of the cmm/ni cpu
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.32
chasEntPhysAirflow
Chassis PS fan airflow direction
Enumeration
Enumerated Values:
0frontToRear
1rearToFront
2notApplicable
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.33
chasEntPhysPowerUsed
This value is only applicable to the PS. It is the current
reading for the power usage of the PS. This value is in Watts.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.34
chasEntPhysPowerType
This object is the type of the power supply, It corresponds to AC,
DC or BPS. This value is only intended for Alcatel internal use.
Enumeration
Enumerated Values:
0notApplicable
1ac
2dc
3bps
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.35

chasEntTemperatureTable

table
.1.3.6.1.4.1.6486.801.1.1.1.1.1.2 · 1 row entry · 4 columns
Open in standard view 
This table contains one row per temperature sensor located on an entity
represented by the associated row in the entPhysicalTable.
chasEntTemperatureEntry entry .1.3.6.1.4.1.6486.801.1.1.1.1.1.2.1
Information about a particular physical temperature sensor.
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
chasEntTempCurrent
This object indicates the current output of the temperature
sensor in degrees Celsius.
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.2.1.1
chasEntTempThreshold
This object is the threshold temperature in degrees Celsius for the
sensor. When the value of chasEntTempCurrent exceeds this value,
a temperature notification is provided to the user.
Integer32
Constraints:
range: 1-150
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.2.1.2
chasEntTempDangerThreshold
This object is the danger threshold temperature in degrees Celsius for
the sensor. When the value of chasEntTempCurrent exceeds this value, the
associated physical entity is powered down.
Integer32
Constraints:
range: 30-150
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.2.1.3
chasEntTempStatus
This object is the status value of the temperature sensor.
It reflects the temperature relative to the chasEntTempThreshold
and chasEntTempDangerThreshold values.
Enumeration
Enumerated Values:
1unknown
2notPresent
3underThreshold
4overFirstThreshold
5overDangerThreshold
 .1.3.6.1.4.1.6486.801.1.1.1.1.1.2.1.4

chasControlModuleTable

table
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1 · 1 row entry · 14 columns
Open in standard view 
This table contains one row for the primary control module.
chasControlModuleEntry entry .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1
Information about the primary control module. This table is an extension
of the entity physical table but this class is instanciated only for a
the primary control module that has a particular Index. When operatiing
in …
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
chasControlActivateTimeout
This value is in seconds. It represents how much time before the
switch automatically falls back to the certified version. This value
is set via the Activate(reload working) cli command.
An Activate reboot must be initi…
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.1
chasControlVersionMngt
For the primary this means:
notSignificant - No command applied.
certifySynchro - Copy the file from the working to the certified
directory and from the primary to the secondary
…
Enumerationr/w
Enumerated Values:
1notSignificant
2certifySynchro
3certifyNoSynchro
4flashSynchro
5restore
6activate
7issu
8shutdown
9vcConvert
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.2
chasControlDelayedActivateTimer
Timer value in seconds used to initiate a delayed activate of the primary
CMM. Writing this object to a non-zero value results in CMM reboot of the
working directory following expiration of the specified activate timer…
Unsigned32r/w
Constraints:
range: 0-31622400
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.3
chasControlCertifyStatus
Returned value indicates if the control module has been certified
(that is the working directory matches the certified directory)
Enumeration
Enumerated Values:
1unknown
2needCertify
3certified
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.4
chasControlSynchronizationStatus
Returned value indicates if the control module has been synchronized
(that is the working directory matches the working directory
on the other control module(s) if present). Returned value is
monoControlModule when no …
Enumeration
Enumerated Values:
1unknown
2monoControlModule
3notSynchronized
4synchronized
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.5
chasControlAcrossCmmWorkingSynchroStatus
Returned value indicates if the /working has been synchronized
across the CMMs (that is the working directory matches the working directory
on all CMMs if present)
Enumeration
Enumerated Values:
1unknown
2monoCMM
3no
4yes
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.6
chasControlAcrossCmmCertifiedSynchroStatus
Returned value indicates if the /certified has been synchronized
across the CMMs if present)
Enumeration
Enumerated Values:
1unknown
2monoCMM
3no
4yes
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.7
chasControlNextRunningVersion
The pathname for the image directory that will be
used on the next reload. Value may be /flash/certified
or /flash/<working directory name>.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.8
chasControlCurrentRunningVersion
The pathname of the image directory to the version
that is currently executing. Value may be /flash/certified
or /flash/<working directory name>.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.9
chasControlWorkingVersion
The path to the currently specified working image directory.
Value may be /flash/certified or /flash/<working directory name>.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.10
chasControlRedundancyTime
Time in minutes that the running image must stay up without error
before a subsequent error reset will restart the board from the
running image. If a CMM in dual-CMM switch fails after a reload
and before chasControlRed…
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.11
chasControlEmpIpAddress deprecated
This object is deprecated. Instead use alaInterfaceTable(ALCATEL-IND1-IP-MIB)
when configuring EMP interfaces.

The IP Address for the primary control module EMP interface.
This address is used for managin…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.12
chasControlEmpIpMask deprecated
This object is deprecated. Instead use alaInterfaceTable(ALCATEL-IND1-IP-MIB)
when configuring EMP interfaces.

The IP Address Mask for the primary control module EMP interface.
This address mask is used f…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.13
chasControlChassisId
The virtual chassis id for the action specified by
chasControlVersionMngt when operating in virtual
chassis mode. A value of 0 indicates the local
chassis.
Integer32r/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.14

chasControlRedundantTable

table
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.2 · 1 row entry · 3 columns
Open in standard view 
This table contains one row per control module. There is always at least
one control module in the system.
chasControlRedundantEntry entry .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.2.1
Information about a particular control module this table is an extension
of the entity physical table but this class is instanciated only for a
particular type of physical entity: the control module that has a
particula…
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
chasControlNumberOfTakeover
This object is a count of the number of times the control module has
changed from primary to secondary mode as a result of a Takeover. Note
that this object can be accessed via user interface to either the
primary or se…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.2.1.1
chasControlDelayedRebootTimer
Timer value (in seconds) used to initiate a delayed reboot of the primary
or secondary CMM using the certified configuration. Writing this object to
a non-zero value results in a CMM reboot following expiration of the
…
Unsigned32r/w
Constraints:
range: 0-31622400
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.2.1.2
chasControlDelayedResetAll
This object is used to schedule a delayed reset all action for a chassis
when running in virtual chassis mode. If set to -1 - cancel the timer,
0 - reset all immediately, any other value will start counting down the
tim…
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.2.1.3

chasChassisTable

table
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3 · 1 row entry · 25 columns
Open in standard view 
This table contains one row per chassis. There is always at least one
chassis or many when running in virtual chassis mode.
chasChassisEntry entry .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1
Information about a particular control module this table is an extension
of the entity physical table but this class is instanciated only for a
particular type of physical entity: the control module that has a
particula…
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
chasFreeSlots
The number of free NI front panel slots.
Unsigned32
Constraints:
range: 0-18
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.1
chasPowerLeft
The power still available on the chassis in Watts.
Integer32
Constraints:
range: -100000-100000
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.2
chasNumberOfResets
This object is a count of the number of times this station has been reset
since a cold-start.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.3
chasTempRange
Temp Range is the value of the temperature sensor for the chassis. The
Temp Range value reflects the temperature of the chassis relative to the
Temp Threshold value (i.e., over vs. under the threshold).
Enumeration
Enumerated Values:
1unknown
2notPresent
3underThreshold
4overFirstThreshold
5overDangerThreshold
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.4
chasTempThreshold
This object is the threshold temperature in degrees Celsius for the
chassis. Temp Threshold is the chassis temperature point at which,
when reached due to an ascending or descending temperature transition,
a temperature…
Integer32r/w
Constraints:
range: 1-150
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.5
chasDangerTempThreshold
This Threshold is a second one which is hardcoded. When the
Chassis Exceeds this value it starts shutting down NIs.
This value will be set by the factory and not changeable.
Integer32
Constraints:
range: 30-150
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.6
chasPrimaryPhysicalIndex
This value holds the Entity Table Physical Index for the Control
Module that is currently primary. This is to allow snmp managers
to determine which Control Module is currently primary so it knows
what entry in the chas…
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.7
chasCPMAHardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
CPMA control module board. This temperature is what is used for
comparing to the threshold …
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.8
chasCFMAHardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
CFMA fabric board. This temperature is what is used for comparing
to the threshold and dete…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.9
chasCPMBHardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
CPMB control module board. This temperature is what is used for
comparing to the threshold …
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.10
chasCFMBHardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
CFMB fabric board. This temperature is what is used for comparing
to the threshold and dete…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.11
chasCFMCHardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
CFMC fabric board. This temperature is what is used for comparing
to the threshold and dete…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.12
chasCFMDHardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
CFMD fabric board. This temperature is what is used for comparing
to the threshold and dete…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.13
chasFTAHardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for
Fantray 1. This temperature is what is used for comparing
to the threshold and determining whet…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.14
chasFTBHardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for
Fantry 2. This temperature is what is used for comparing
to the threshold and determining wheth…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.15
chasNI1HardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 1. This temperature is what is used for comparing
to the threshold and det…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.16
chasNI2HardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 2. This temperature is what is used for comparing
to the threshold and det…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.17
chasNI3HardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 3. This temperature is what is used for comparing
to the threshold and det…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.18
chasNI4HardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 4. This temperature is what is used for comparing
to the threshold and det…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.19
chasNI5HardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 5. This temperature is what is used for comparing
to the threshold and det…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.20
chasNI6HardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 6. This temperature is what is used for comparing
to the threshold and det…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.21
chasNI7HardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 7. This temperature is what is used for comparing
to the threshold and det…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.22
chasNI8HardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for the
NI board in slot 8. This temperature is what is used for comparing
to the threshold and det…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.23
chasPowerSupplyRedundancy
This object indicates the state of power supply redundancy mode.
When on(1), N+1 mode redundancy is enabled(default mode). In
this mode the system controls the power supplies to maintain
efficient use of the power suppl…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.24
chasPowerSupplyRedundancyReserve
When chasPowerSupplyRedundancyReserve is enabled, N+1 power supply
redundancy reserve holds the wattage of one power supply in reserve
such that the user cannot insert NIs or configure power over Ethernet (POE)
that w…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.3.1.25

chasSupervisionRfsLsTable

table
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4 · 1 row entry · 8 columns
Open in standard view 
This table contains a list of file on the remote chassis per directory.
chasSupervisionRfsLsEntry entry .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1
Information about a remote file.
A row in this table contains a file per directory per chassis
Indexes
chasSupervisionRfsLsFileIndex
Column Syntax OID
chasSupervisionRfsLsFileIndex
This value holds file Index for the RFS LS table.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.1
chasSupervisionRfsLsSlot
CMM Slot where remote file is located.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.2
chasSupervisionRfsLsDirName
The remote directory name where remote file is located in
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.3
chasSupervisionRfsLsFileName
The file name of remote file
OctetString
Constraints:
range: 0-33
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.4
chasSupervisionRfsLsFileType
The Type of a remote file
Enumeration
Enumerated Values:
1file
2directory
3undefined
4tarArchive
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.5
chasSupervisionRfsLsFileSize
size of this remote file
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.6
chasSupervisionRfsLsFileAttr
attributes of this remote file
Enumeration
Enumerated Values:
1undefined
2readOnly
3readWrite
4writeOnly
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.7
chasSupervisionRfsLsFileDateTime
the modification date and time of a remote file
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.4.1.8

chasControlReloadStatusTable

table
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.6 · 1 row entry · 2 columns
Open in standard view 
Table containing reload status of each network interface
slot or stack module
chasControlReloadEntry entry .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.6.1
Entry of a network interface reload status
Indexes
chasControlReloadIndex
Column Syntax OID
chasControlReloadIndex
The index (entPhsycialIndex) value of the network interface.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.6.1.1
chasControlReloadStatus
Returned value indicates if the network interface module is
enabled or disabled for reload.
Enumeration
Enumerated Values:
1reloadEnabled
2reloadDisabled
3noInterface
4unknown
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.6.1.2

chasSupervisionRfsDfTable

table
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.8 · 1 row entry · 5 columns
Open in standard view 
This table contains information about file system size and use.
chasSupervisionRfsDfEntry entry .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.8.1
This entry contains information about file system size and use.
Indexes
chasSupervisionRfsDfSlot
Column Syntax OID
chasSupervisionRfsDfSlot
CMM Slot where flash space is evaluated.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.8.1.1
chasSupervisionRfsDfFlashFree
Number bytes free on the file system.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.8.1.2
chasSupervisionRfsDfFlashSize
Number of total bytes on the file system.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.8.1.3
chasSupervisionRfsDfUsbFree
The amount of free space on the USB file system.
kbSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.8.1.4
chasSupervisionRfsDfUsbSize
The total amount of space on the USB file system.
kbSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.8.1.5

chasSupervisionFlashMemTable

table
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.9 · 1 row entry · 4 columns
Open in standard view 
This table contains the systems flash memory information.
chasSupervisionFlashMemEntry entry .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.9.1
This contains one entry for the flash memory table.
Indexes
chasSupervisionSlot
Column Syntax OID
chasSupervisionSlot
CMM Slot where flash space is evaluated.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.9.1.1
chasSupervisionFlashSize
Flash memory size.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.9.1.2
chasSupervisionFlashFree
Number bytes free on file system.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.9.1.3
chasSupervisionFlashUsed
A rounded up percentage of Flash Memory used.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.9.1.4

chasSupervisionCmmCertifiedTable

table
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.10 · 1 row entry · 2 columns
Open in standard view 
This table contains certification status
chasSupervisionCmmCertifiedEntry entry .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.10.1
Information about control module certification status. This class is
instanciated only when running in virtual chassis mode.
Indexes
chasSupervisionCmmNum
Column Syntax OID
chasSupervisionCmmNum
CMM Slot where /certified directory is evaluated.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.10.1.1
chasSupervisionCmmCertifiedStatus
The status of the CMM certified directory - certified or not.
Enumeration
Enumerated Values:
0notPresent
1yes
2no
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.10.1.2

alaChasEntPhysFanTable

table
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.11 · 1 row entry · 4 columns
Open in standard view 
This table contains one row per physical fan entity.
alaChasEntPhysFanEntry entry .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.11.1
Information about a particular fan in a chassis physical entity.
Indexes
ENTITY-MIBentPhysicalIndex alaChasEntPhysFanLocalIndex
Column Syntax OID
alaChasEntPhysFanLocalIndex
Index to a chassis fan entity
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.11.1.1
alaChasEntPhysFanStatus
Chassis fan operational status
Enumeration
Enumerated Values:
0noStatus
1notRunning
2running
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.11.1.2
alaChasEntPhysFanAirflow
Chassis fan airflow direction
Enumeration
Enumerated Values:
0frontToRear
1rearToFront
2notApplicable
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.11.1.3
alaChasEntPhysFanSpeed
Chassis fan speed.
rpmSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.11.1.4

alaChasBpsFwTable

table
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.1 · 1 row entry · 5 columns
Open in standard view 
This table contains one row per shelf bps firrmware
alaChasBpsFwEntry entry .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.1.1
Information about a bps firrmare
Indexes
alaChasBpsShelfId
Column Syntax OID
alaChasBpsShelfId
Bps shelf ID
AlaChasBpsShelfId
Textual Convention: AlaChasBpsShelfId Integer32
Type Constraints:
range: 1..3
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.1.1.1
alaChasBpsUpdateFirmware
This object is used to start BPS firmware update.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.1.1.2
alaChasBpsCpldRev
This object contains the CPLD revision Number of the BPS
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.1.1.3
alaChasBpsMmcuRev
This object contains the MMCU revision Number of the BPS
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.1.1.4
alaChasBpsCmcuRev
This object contains the CMCU revision Number of the BPS
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.1.1.5

alaChasBpsConnectorPriorityTable

table
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.2 · 1 row entry · 5 columns
Open in standard view 
This table contains BPS connector priority for each slot
alaChasBpsConnectorPriorityEntry entry .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.2.1
Information about bps connector priority for each slot
Indexes
alaChasBpsChassisId
Column Syntax OID
alaChasBpsChassisId
Numbers allocated for the stack NIs as follows:
- 1..8: valid and assigned slot numbers corresponding to values from the entPhysicalTable
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.2.1.1
alaChasBpsConnectorShelfId
Bps shelf ID
AlaChasBpsShelfId
Textual Convention: AlaChasBpsShelfId Integer32
Type Constraints:
range: 1..3
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.2.1.2
alaChasBpsConnectorPriority
This object specifies the bps connector priority.
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.2.1.3
alaChasBpsConnectorNum
This object specifies the bps connector num.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.2.1.4
alaChasBpsSerialNum
This object specifies the bps serial num.
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.2.1.5

alaChasBpsModeTable

table
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.3 · 1 row entry · 1 columns
Open in standard view 
This table contains one row for bps config parameters.
alaChasBpsModeEntry entry .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.3.1
Information about bps mode
Indexes
alaChasBpsShelfId
Column Syntax OID
alaChasBpsMode
This object is only applicable to BPS .Value is
used to specify current Mode of switch.
Enumerationr/w
Enumerated Values:
1single
2full
3notApplicable
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.3.1.1

alaChasBpsPowerSupplyTable

table
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4 · 1 row entry · 11 columns
Open in standard view 
This table contains   BPS power supplies details
alaChasBpsPowerSupplyEntry entry .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1
Information about a particular BPS power supply
Indexes
alaChasBpsPowerSupplyShelfId alaChasBpsPowerSupplyIndex
Column Syntax OID
alaChasBpsPowerSupplyShelfId
BPS shelf ID
AlaChasBpsShelfId
Textual Convention: AlaChasBpsShelfId Integer32
Type Constraints:
range: 1..3
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.1
alaChasBpsPowerSupplyIndex
This value hold BPS power power supply Index
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.2
alaChasBpsPowerSupplyName
This object hold name of BPS power supply
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.3
alaChasBpsPowerSupplyDescr
This object hold description of BPS power supply
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.4
alaChasBpsPowerSupplyModuleType
This object is unique module Type or ID from BPS entities eeprom
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.5
alaChasBpsPowerSupplyPartNumber
This object contains the BPS power supply Part Number
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.6
alaChasBpsPowerSupplyHardwareRev
The vendor-specific hardware revision string for the
BPS power supplies
Note that if revision information is stored internally in a
non-printable (e.g., binary) format, then the agent must
convert such information to a…
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.7
alaChasBpsPowerSupplySerialNum
The vendor-specific serial number string for the
BPS power supplies
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.8
alaChasBpsPowerSupplyMfgDate
This object contains the manufacturing date of the BPS power supplies .
Its format is mmm dd yyyy : NOV 27 2012.
OctetString
Constraints:
range: 0-11
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.9
alaChasBpsPowerSupplyOperStatus
Oper status of BPS power supply
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.10
alaChasBpsPowerSupplyPowerProv
It corresponds to max power of BPS power supply.
This value is in Watts.
Integer32
Constraints:
range: 0-2000
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.4.1.11

alaChasBpsTotalPowerAllocTable

table
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.5 · 1 row entry · 4 columns
Open in standard view 
This table contains one row for parameters which reflect total allocation by BPS .
alaChasBpsTotalPowerAllocEntry entry .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.5.1
Information about various bps config parameters
Indexes
alaChasBpsShelfId
Column Syntax OID
alaChasBpsSysTotalAvailablePower
This value is only applicable to the BPS Module. It
corresponds to system total power available on BPS
This value is in Watts.
Integer32
Constraints:
range: 0-900
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.5.1.1
alaChasBpsSysTotalAllocation
This value is only applicable to the BPS Modules. It
corresponds to total system power allocated by BPS
This value is in Watts.
Integer32
Constraints:
range: 0-900
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.5.1.2
alaChasBpsPoeTotalAvailablePower
This value is only applicable to the BPS Modules. It
corresponds to system total power available on BPS
This value is in Watts.
Integer32
Constraints:
range: 0-6000
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.5.1.3
alaChasBpsPoeTotalAllocation
This value is only applicable to the Bps Modules. It
corresponds to total POE power allocated by BPS
This value is in Watts.
Integer32
Constraints:
range: 0-6000
 .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.14.5.1.4