chasEntPhysOperStatus

All modules (even empty slots) are in unknown state when the chassis
first powers up.
              
Chassis status possible value :
        up <=> powered up
              
Control Module possible value :
        notPresent <=> CM not present
        up <=> CM up and running
        down <=> CM down and powered
        secondary <=> CM in secondary mode and running
              
NI status possible value :
        notPresent <=> NI not present
        up <=> NI up and running
        down <=> NI down and powered
        unpowered <=> NI unpowered because there is not enough power in the system
                      (chasEntPhysAdminStatus = powerOn) or because the NI has to be OFF
                      (chasEntPhysAdminStatus = powerOff). This operational status has
          not full meaning without chasEntPhysAdminStatus
              
Fabric status possible value :
        master <=> up and acting as master
        up <=> up and acting as slave
        secondary <=> secondary mode for redundancy
              
Daughter board status possible value :
        notPresent <=> DB not present
        up <=> DB up and running
        down <=> DB down and powered
              
Power supply status possible value :
        up <=> PS up
        down <=> PS administratively down
        unpowered <=> PS not plugged in
        pwrsave <=> chassis in powersave mode, supply turned off
              
Fan Tray status possible value :
        up <=> powered up
        down <=> powered down
        fault <=> fault detected

MIB

ALCATEL-ENT1-CHASSIS-MIB

OID

.1.3.6.1.4.1.6486.801.1.1.1.1.1.1.1.2

Type

column

Access

readonly

Status

current

Parent

chasEntPhysicalEntry