chasControlActivateTimeout

ALCATEL-ENT1-CHASSIS-MIB · .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.1
MIB view Table view

Object

column r/w Integer32 
This value is in seconds. It represents how much time before the
switch automatically falls back to the certified version. This value
is set via the Activate(reload working) cli command.
An Activate reboot must be initiated via the primary CMM and that
the timeout value can be accessed via user interface to the primary CMM
only. After the Activate reboot has been initiated, a timeout will occur
(i.e., an Activate Timeout) at the timeout value specified by the user.
If a reboot cancel has not been received prior to the timeout expiration,
the primary CMM will automatically reboot (i.e., re-reboot) using the
certified configuration. This ensures that an automatic backup reboot is
available using the certified configuration in the event that the user
is unable to interface with primary CMM as a result of the attempted
Activate reboot. If the Activate reboot is successful, the user cancels
the backup reboot via the normal reboot cancellation process (i.e., a
zero value is written for the object chasControlDelayedRebootTimer).

Context

MIB
ALCATEL-ENT1-CHASSIS-MIB
OID
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.1
Type
column
Access
readwrite
Status
current
Parent
chasControlModuleEntry
Table
chasControlModuleTable
Siblings
13

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-900

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
chasControlWorkingVersion
The path to the currently specified working image directory. Value may be /flash/certified or /flash/<working directory name>.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.10
chasControlRedundancyTime
Time in minutes that the running image must stay up without error before a subsequent error reset will restart the board from the running image. If a CMM in dual-CMM switch fails …
columnInteger32.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.11
chasControlEmpIpAddress deprecated
This object is deprecated. Instead use alaInterfaceTable(ALCATEL-IND1-IP-MIB) when configuring EMP interfaces. The IP Address for the primary control module EMP int…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.12
chasControlEmpIpMask deprecated
This object is deprecated. Instead use alaInterfaceTable(ALCATEL-IND1-IP-MIB) when configuring EMP interfaces. The IP Address Mask for the primary control module EM…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.13
chasControlChassisId
The virtual chassis id for the action specified by chasControlVersionMngt when operating in virtual chassis mode. A value of 0 indicates the local chassis.
columnInteger32.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.14
chasControlVersionMngt
For the primary this means: notSignificant - No command applied. certifySynchro - Copy the file from the working to the certified directory and from the pri…
columnEnumeration.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.2
chasControlDelayedActivateTimer
Timer value in seconds used to initiate a delayed activate of the primary CMM. Writing this object to a non-zero value results in CMM reboot of the working directory following ex…
columnUnsigned32.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.3
chasControlCertifyStatus
Returned value indicates if the control module has been certified (that is the working directory matches the certified directory)
columnEnumeration.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.4
chasControlSynchronizationStatus
Returned value indicates if the control module has been synchronized (that is the working directory matches the working directory on the other control module(s) if present). Retu…
columnEnumeration.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.5
chasControlAcrossCmmWorkingSynchroStatus
Returned value indicates if the /working has been synchronized across the CMMs (that is the working directory matches the working directory on all CMMs if present)
columnEnumeration.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.6
chasControlAcrossCmmCertifiedSynchroStatus
Returned value indicates if the /certified has been synchronized across the CMMs if present)
columnEnumeration.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.7
chasControlNextRunningVersion
The pathname for the image directory that will be used on the next reload. Value may be /flash/certified or /flash/<working directory name>.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.8
chasControlCurrentRunningVersion
The pathname of the image directory to the version that is currently executing. Value may be /flash/certified or /flash/<working directory name>.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.9