chasControlWorkingVersion
ALCATEL-ENT1-CHASSIS-MIB ·
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.10
Object
The path to the currently specified working image directory. Value may be /flash/certified or /flash/<working directory name>.
Context
- MIB
- ALCATEL-ENT1-CHASSIS-MIB
- OID
.1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- chasControlModuleEntry
- Table
- chasControlModuleTable
- Siblings
- 13
Syntax
SNMP-FRAMEWORK-MIBSnmpAdminString
- Source
- SNMP-FRAMEWORK-MIBSnmpAdminString
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| chasControlActivateTimeout This value is in seconds. It represents how much time before the
switch automatically falls back to the certified version. This value
is set via the Activate(reload working) cli c… | column | Integer32 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.1 |
| chasControlRedundancyTime Time in minutes that the running image must stay up without error
before a subsequent error reset will restart the board from the
running image. If a CMM in dual-CMM switch fails … | column | Integer32 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.11 |
| chasControlEmpIpAddress deprecated This object is deprecated. Instead use alaInterfaceTable(ALCATEL-IND1-IP-MIB)
when configuring EMP interfaces.
The IP Address for the primary control module EMP int… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.12 |
| chasControlEmpIpMask deprecated This object is deprecated. Instead use alaInterfaceTable(ALCATEL-IND1-IP-MIB)
when configuring EMP interfaces.
The IP Address Mask for the primary control module EM… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.13 |
| chasControlChassisId The virtual chassis id for the action specified by
chasControlVersionMngt when operating in virtual
chassis mode. A value of 0 indicates the local
chassis. | column | Integer32 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.14 |
| chasControlVersionMngt For the primary this means:
notSignificant - No command applied.
certifySynchro - Copy the file from the working to the certified
directory and from the pri… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.2 |
| chasControlDelayedActivateTimer Timer value in seconds used to initiate a delayed activate of the primary
CMM. Writing this object to a non-zero value results in CMM reboot of the
working directory following ex… | column | Unsigned32 | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.3 |
| chasControlCertifyStatus Returned value indicates if the control module has been certified
(that is the working directory matches the certified directory) | column | Enumeration | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.4 |
| chasControlSynchronizationStatus Returned value indicates if the control module has been synchronized
(that is the working directory matches the working directory
on the other control module(s) if present). Retu… | column | Enumeration | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.5 |
| chasControlAcrossCmmWorkingSynchroStatus Returned value indicates if the /working has been synchronized
across the CMMs (that is the working directory matches the working directory
on all CMMs if present) | column | Enumeration | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.6 |
| chasControlAcrossCmmCertifiedSynchroStatus Returned value indicates if the /certified has been synchronized
across the CMMs if present) | column | Enumeration | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.7 |
| chasControlNextRunningVersion The pathname for the image directory that will be
used on the next reload. Value may be /flash/certified
or /flash/<working directory name>. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.8 |
| chasControlCurrentRunningVersion The pathname of the image directory to the version
that is currently executing. Value may be /flash/certified
or /flash/<working directory name>. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.6486.801.1.1.1.3.1.1.1.1.9 |