ADTRAN-SHDSL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

189

adEShdslInventoryTable

table

.1.3.6.1.4.1.664.5.59.1.2.1 · 1 row entry · 17 columns

Open in standard view

This table supports retrieval of unit inventory information
available via the EOC from units in a SHDSL line.
          
Entries in this table are dynamically created during the
line discovery process.  The life cycle for these entries
is as follows:
          
   - stu discovers a device, either a far-end stu or an sru
   - an inventory table entry is created for the device
   - the line goes down for whatever reason
   - inventory table entries for unreachable devices are
     destroyed.
          
As these entries are created/destroyed dynamically, they
are NOT persistent.

adEShdslInventoryEntry entry .1.3.6.1.4.1.664.5.59.1.2.1.1

An entry in the adEShdslInventoryTable. Each entry
represents inventory information for a single unit in a
SHDSL line. It is indexed by the ifIndex of the
SHDSL line and the adEShdslUnitId of the
associated unit.

Indexes

IF-MIBifIndex adEShdslInvIndex

Column Syntax OID

adEShdslInvVendorID

Vendor ID as reported in an Inventory Response message.

OctetString

Constraints:
range: 8-8

.1.3.6.1.4.1.664.5.59.1.2.1.1.1

adEShdslInvVendorModelNumber

Vendor model number as reported in an Inventory Response
message.

OctetString

Constraints:
range: 12-12

.1.3.6.1.4.1.664.5.59.1.2.1.1.2

adEShdslInvVendorSerialNumber

Vendor serial number as reported in an Inventory Response
message.

OctetString

Constraints:
range: 25-25

.1.3.6.1.4.1.664.5.59.1.2.1.1.3

adEShdslInvStandardVersion

Version of the SHDSL standard implemented, as reported
in an Inventory Response message.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.2.1.1.4

adEShdslInvVendorListNumber

Vendor list number as reported in an Inventory Response
message.

OctetString

Constraints:
range: 3-3

.1.3.6.1.4.1.664.5.59.1.2.1.1.5

adEShdslInvVendorIssueNumber

Vendor issue number as reported in an Inventory Response
message.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.664.5.59.1.2.1.1.6

adEShdslInvVendorSoftwareVersion

Vendor software version as reported in an Inventory Response
message.

OctetString

Constraints:
range: 6-6

.1.3.6.1.4.1.664.5.59.1.2.1.1.7

adEShdslInvEquipmentCode

Equipment code conforming to ANSI T1.213, Coded Identification
of Equipment Entities.

OctetString

Constraints:
range: 10-10

.1.3.6.1.4.1.664.5.59.1.2.1.1.8

adEShdslInvVendorOther

Other vendor information as reported in an Inventory Response
message.

OctetString

Constraints:
range: 12-12

.1.3.6.1.4.1.664.5.59.1.2.1.1.9

adEShdslInvVendorEOCSoftwareVersion

Vendor EOC version as reported in a Discovery Response
message.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.2.1.1.10

adEShdslInvMfrDate

Optional Date of manufacture. Some products support.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.59.1.2.1.1.11

adEShdslInvCircuitID

Optional Circuit ID assigned to all elements in the xdsl circuit.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.59.1.2.1.1.12

adEShdslInvScratchPad

Optional Scratch Pad. 50 bytes long.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.59.1.2.1.1.13

adEShdslInvDspHwVersion

Returns the hardware version of the DSP

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.59.1.2.1.1.14

adEShdslInvDspFwVersion

Returns the firmware version of the DSP

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.59.1.2.1.1.15

adEShdslInvElementPresent

Returns true(1) if the element specified by adEShdslInvIndex is
present in the circuit. Returns false(2) otherwise

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.664.5.59.1.2.1.1.16

adEShdslInvPhysicalLinkId

Returns the physical link number associated with the element
specified by adEShdslInvIndex. For example, a 2 port repeater
would return 1 or 2 while an 8 port NTU would return a value
between 1 and 8 depending on which…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.2.1.1.17

adEShdslProvTable

table

.1.3.6.1.4.1.664.5.59.1.3.1 · 1 row entry · 24 columns

Open in standard view

This table supports definitions of the configuration
of SHDSL lines.

adEShdslProvEntry entry .1.3.6.1.4.1.664.5.59.1.3.1.1

An entry in the adEShdslProvTable.

Indexes

IF-MIBifIndex

Column Syntax OID

adEShdslProvWireInterfaceMode

This object configures the two-wire or optional four-wire
operation for SHDSL Lines.

Enumerationr/w

Enumerated Values:

1	twoWire
2	fourWire

.1.3.6.1.4.1.664.5.59.1.3.1.1.1

adEShdslProvMinLineRate

This object configures the minimum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If
the minimum line rate equals the maximum line rate
(adEShdslSpanMaxLineRate), the line rate is considered
…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.3.1.1.2

adEShdslProvMaxLineRate

This object configures the maximum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If
the minimum line rate equals the maximum line rate
(adEShdslSpanMaxLineRate), the line rate is considered
…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.3.1.1.3

adEShdslProvG9912Annex

This object specifies the G991.2 Annex setting for the SHDSL
line.

Enumerationr/w

Enumerated Values:

1	annexA
2	annexB
3	annexAorB
4	efm
5	annexAorEfm
6	annexBorEfm
7	annexAorBorEfm

.1.3.6.1.4.1.664.5.59.1.3.1.1.4

adEShdslProvCurrCondTargetMargin

This object specifies the current condition target
SNR margin for a SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR margin
is the desired SNR margin for a unit.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.3.1.1.5

adEShdslProvWorstCaseTargetMargin

This object specifies the worst case target
SNR margin for a SHDSL line. The SNR margin is the difference
between the desired SNR and the actual SNR. Target SNR margin
is the desired SNR margin for a unit.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.3.1.1.6

adEShdslProvUsedTargetMargins

Indicates which target SNR margin is enabled currently being used
in line probing. This has no meaning if line probing is disabled.

Enumeration

Enumerated Values:

1	currCond
2	worstCase

.1.3.6.1.4.1.664.5.59.1.3.1.1.7

adEShdslProvClockMode

This object configures the clock reference for the STU-C
in a SHDSL Line.

Enumerationr/w

Enumerated Values:

1	clockMode1
2	clockMode2
3	clockMode3a
4	clockMode3b

.1.3.6.1.4.1.664.5.59.1.3.1.1.8

adEShdslProvLineProbing

This object enables/disables support for Line Probe of
the units in a SHDSL line. When Line Probe is enabled, the
system performs Line Probing to find the best possible
rate.

A SET to disable(1) enables …

Enumerationr/w

Enumerated Values:

1	disable
2	enableCurrCond
3	enableWorseCase
4	enableANFP
5	enableMaxRate
6	enableT1417
7	enableG9912
8	enableG9912nl
9	disableLineProbeEnableExtFixed
10	enableANFPWorstCase
11	enableANFPCurrentCond

.1.3.6.1.4.1.664.5.59.1.3.1.1.9

adEShdslProvConstellation

This object sets the constellation size for each SHDSL
line. The selected constellation size is rate dependent.
16-TCPAM can only be used for rates ranging from 3 to 60
DS0's (192kbps to 3840kbps). 32-TCPAM can only b…

Enumerationr/w

Enumerated Values:

1	tcpam16
2	tcpam32

.1.3.6.1.4.1.664.5.59.1.3.1.1.10

adEShdslProvPowerBackoff

This object sets the power backoff value for each SHDSL
line. If 255 is selected, the power backoff will automatically
be applied up to 6 dB. Valid values for forcing the backoff
are from 0 to 31dB.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.3.1.1.11

adEShdslProvName

This object sets a display name associated with the selected
SHDSL interface.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.59.1.3.1.1.12

adEShdslProvSpanPower

Span power. This is usually NOT applicable to a remote/NCTE unit.
Usually only applies for CO equipment (e.g. an access module).

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.664.5.59.1.3.1.1.13

adEShdslProvNIUloopback

NIU Loopback enable. May not be applicate for all units.

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.664.5.59.1.3.1.1.14

adEShdslProvConstellationCrossoverRate

This object defines the rate (in bits per second) at which the number
of bits per symbol used automatically changes from 3 (16-TCPAM) to
4 (32-TCPAM). When the SHDSL line rate reaches this value, the \
constellation s…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.3.1.1.15

adEShdslProvAnfp100KhzLoss

This object specifies the customer measured loss at 100Khz on the respective
SHDSL line. When adEShdslProvLineProbing is set to enableANFP(4) this value
sets the maximum rate according to the ANFP spec

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.3.1.1.16

adEShdslProvAnfpTargetMargin

This object specifies the target SNR margin for a SHDSL line when the ANFP
rate mode has been selected. The SNR margin is the difference between the
desired SNR and the actual SNR. Target SNR margin is the desired SNR
m…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.3.1.1.17

adEShdslProvEmergencyFreeze

This object controls Emergency Freeze operation which provides enhanced
immunity to micro interruptions and short duration overvoltage conditions.

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.664.5.59.1.3.1.1.18

adEShdslProvExtendedFixedRateAndConstellation

This object provisions the rate and constellation to be used in Extended Fixed mode.
The first octet contains the rate in 64kbps increments (Nx64k). The second octet contains
the constellation in bits/baud. One thing …

OctetStringr/w

Constraints:
range: 2-2

.1.3.6.1.4.1.664.5.59.1.3.1.1.19

adEShdslProvExtendedFixedLastError

This object returns the last error encountered during a SET of adEShdslProvExtendedFixedRateAndConstellation.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.59.1.3.1.1.20

adEShdslProvAnfp100KhzLossLetter

When adEShdslProvLineProbing is set to enableANFPWorstCase(10)
or enableANFPCurrentCond(11) this object sets the maximum
rate according to the ANFP spec
U (Ultra Short, 100k loss<=11)
X (Extra Short, 100k loss<=21)
S…

Enumerationr/w

Enumerated Values:

1	ultrashortU
2	extrashortX
3	shortS
4	mediumM
5	longL

.1.3.6.1.4.1.664.5.59.1.3.1.1.21

adEShdslProvAnfpMaxLineRate

This object configures the maximum transmission rate for
the associated SHDSL Line in bits-per-second (bps) when
an ANFP training mode is enabled. The maximum train rate
of the line will be the minimum of the ANFP limi…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.3.1.1.22

adEShdslProvSCIAlarmThresh

This object configures the SCI alarm threshold for adEShdslSCIThreshCrossed in seconds.
A value of 0 means the alarm is disabled.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.3.1.1.23

adEShdslProvSCIAlarmSeverity

Sets the severity for adEShdslSCIThreshCrossed.
Valid options listed below:
critical (0)
major (1)
minor (2)
alert (3)
info (4)

Enumerationr/w

Enumerated Values:

2	info
3	alert
4	minor
5	major
6	critical

.1.3.6.1.4.1.664.5.59.1.3.1.1.24

adEShdslAlarmProvTable

table

.1.3.6.1.4.1.664.5.59.1.3.2 · 1 row entry · 18 columns

Open in standard view

This table supports definitions of the alarm configuration
of SHDSL lines.

adEShdslAlarmProvEntry entry .1.3.6.1.4.1.664.5.59.1.3.2.1

An entry in the adEShdslAlarmProvTable.

Indexes

IF-MIBifIndex adEShdslInvIndex adEShdslSideIndex adEShdslWirePairIndex

Column	Syntax	OID
adEShdslAlarmProvLoopAttenThresh This object configures the loop attenuation alarm threshold. A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.1`
adEShdslAlarmProvSNRMarginThresh This object configures the SNR margin alarm threshold. A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.2`
adEShdslAlarmProvESThresh This object configures the 15-Minute Errored Second alarm threshold. A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.3`
adEShdslAlarmProvSESThresh This object configures the 15-Minute Severely Errored Second alarm threshold. A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.4`
adEShdslAlarmProvUASThresh This object configures the 15-Minute Unavailable Second alarm threshold. A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.5`
adEShdslAlarmProvCVCThresh This object configures the 15-Minute Code Violation Count alarm threshold. A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.6`
adEShdslAlarmProvLOSWSThresh This object configures the 15-Minute Loss of Sync Word Second alarm threshold. A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.7`
adEShdslAlarmProvOSThresh This object configures the 15-Minute Outage Second alarm threshold. A value of 0 means the alarm is disabled.	Integer32r/w Constraints: `range: 0-900`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.8`
adEShdslAlarmProvES24HrThresh This object configures the 24-Hour Errored Second alarm threshold. A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.9`
adEShdslAlarmProvSES24HrThresh This object configures the 24-Hour Severely Errored Second alarm threshold. A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.10`
adEShdslAlarmProvUAS24HrThresh This object configures the 24-Hour Unavailable Second alarm threshold. A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.11`
adEShdslAlarmProvCVC24HrThresh This object configures the 24-Hour Code Violation Count alarm threshold. A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.12`
adEShdslAlarmProvLOSWS24HrThresh This object configures the 24-Hour Loss of Sync Word Second alarm threshold. A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.13`
adEShdslAlarmProvOS24HrThresh This object configures the 24-Hour Outage Second alarm threshold. A value of 0 means the alarm is disabled.	Integer32r/w Constraints: `range: 0-900`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.14`
adEShdslAlarmProvRetrains15MinThresh This object configures the 15 minute alarm threshold for the number of times the specified interface transitions from handshaking to training. A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.15`
adEShdslAlarmProvHandshakeFailures15MinThresh This object configures the 15 minute alarm threshold for the number of times a handshake session fails to converge on the specified interface A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.16`
adEShdslAlarmProvRetrains24HrThresh This object configures the 24 hour alarm threshold for the number of times the specified interface transitions from handshaking to training. A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.17`
adEShdslAlarmProvHandshakeFailures24HrThresh This object configures the 24 hour alarm threshold for the number of times a handshake session fails to converge on the specified interface A value of 0 means the alarm is disabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.3.2.1.18`

adEShdslTestProvTable

table

.1.3.6.1.4.1.664.5.59.1.3.3 · 1 row entry · 2 columns

Open in standard view

This table supports definitions of the test configuration
of SHDSL lines.

adEShdslTestProvEntry entry .1.3.6.1.4.1.664.5.59.1.3.3.1

An entry in the adEShdslTestProvTable.

Indexes

IF-MIBifIndex adEShdslInvIndex

Column Syntax OID

adEShdslTestProvLoopbackTimeout

This object configures the loopback timeout. The
timeout is a 12-bit unsigned integer that represents
the number of minutes after which the loopback will be
removed. A value of 0 means there is no timeout and
any loopb…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.3.3.1.1

adEShdslTestProvEnumeratedLoopbackTimeout

This object configures the loopback timeout. The
timeout is selected from the enumerated list. Products that
support this method do not support adEShdslTestProvLoopbackTimeout.

Enumerationr/w

Enumerated Values:

1	timeoutDisabled
2	timeout20Minutes
3	timeout60Minutes
4	timeout120Minutes
5	timeout8Hours
6	timeout24Hours

.1.3.6.1.4.1.664.5.59.1.3.3.1.2

adEShdslStatusTable

table

.1.3.6.1.4.1.664.5.59.1.4.1 · 1 row entry · 26 columns

Open in standard view

This table contains entries that report the current status of each point
along the SHDSL line.

adEShdslStatusEntry entry .1.3.6.1.4.1.664.5.59.1.4.1.1

An entry in the adEShdslStatusTable.

Indexes

IF-MIBifIndex adEShdslInvIndex adEShdslSideIndex adEShdslWirePairIndex

Column Syntax OID

adEShdslStatusCurrStatus

Indicates the current status of the requested SHDSL interface.

Enumeration

Enumerated Values:

1	linkDown
2	handshaking
3	training
4	linkUp
5	alarmsPresent
6	inTest

.1.3.6.1.4.1.664.5.59.1.4.1.1.1

adEShdslStatusCurrLoopAtten

Indicates the current value of the loop attenuation at the requested
SHDSL interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.2

adEShdslStatusMinLoopAtten

Indicates the minimum value of the loop attenuation since the last reset.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.3

adEShdslStatusMaxLoopAtten

Indicates the maximum value of the loop attenuation since the last reset.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.4

adEShdslStatusCurrSNRMargin

Indicates the current value of the SNR margin at the requested
SHDSL interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.5

adEShdslStatusMinSNRMargin

Indicates the minimum value of the SNR margin since the last reset.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.6

adEShdslStatusMaxSNRMargin

Indicates the maximum value of the SNR margin since the last reset.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.7

adEShdslStatusES

Indicates the number of Errored Seconds since the last reset.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.8

adEShdslStatusSES

Indicates the number of Severely Errored Seconds since the last reset.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.9

adEShdslStatusUAS

Indicates the number of Unavailable Seconds since the last reset.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.10

adEShdslStatusCVC

Indicates the number of Code Violations since the last reset.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.11

adEShdslStatusLOSWS

Indicates the number of Loss of Sync Word Seconds since the last reset.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.12

adEShdslStatusOS

Indicates the number of Outage Seconds since the last reset.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.13

adEShdslStatusResetStatistics

A SET causes the status information to be reset. A GET returns a 1.

Enumerationr/w

Enumerated Values:

reset

.1.3.6.1.4.1.664.5.59.1.4.1.1.14

adEShdslStatusMaxAttainableRate

Indicates the maximum attainable line rate for this interface in bps.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.15

adEShdslStatusUpstreamPBO

Indicates the value of the power backoff (in dB) in the upstream direction.
(i.e. the closest SHDSL network interface to the endpoint selected.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.16

adEShdslStatusDownstreamPBO

Indicates the value of the power backoff (in dB) in the downstream direction.
(i.e. the closest SHDSL customer interface to the endpoint selected.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.17

adEShdslStatusCurrRate

This object returns the currently configured rate for
the associated SHDSL Line in bits-per-second (bps). This
represents the actual rate the line is trained at.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.18

adEShdslStatusRetrains

Indicates the number of times, since last reset, that
the specified interface has transitioned from handshaking
to training.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.19

adEShdslStatusHandshakeFailures

Indicates the number of times, since last reset, that
a handshake session failed to converge on the specified
interface

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.20

adEShdslStatusCurrSNRMarginCurrTrain

Indicates the current value of the SNR margin at the requested
SHDSL interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.21

adEShdslStatusMinSNRMarginCurrTrain

Indicates the minimum value of the SNR margin observed since the
last retrain.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.22

adEShdslStatusMaxSNRMarginCurrTrain

Indicates the maximum value of the SNR margin observed since the
last retrain.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.23

adEShdslStatusMinSNRMarginPrevTrain

Indicates the minimum value of the SNR margin observed before the
last retrain.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.24

adEShdslStatusMaxSNRMarginPrevTrain

Indicates the maximum value of the SNR margin observed before the
last retrain.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.4.1.1.25

adEShdslStatusPhysicalLinkLabel

Returns the label used to physically identify the specified side of an element.
For example, SHDSL repeaters have an A side and a B side.
For elements without such a label, this will return an empty string.

OctetString

Constraints:
range: 0-1

.1.3.6.1.4.1.664.5.59.1.4.1.1.26

adEShdslStatusInfoTable

table

.1.3.6.1.4.1.664.5.59.1.4.2 · 1 row entry · 4 columns

Open in standard view

This table contains entries that report the current status of each point
along the SHDSL line.

adEShdslStatusInfoEntry entry .1.3.6.1.4.1.664.5.59.1.4.2.1

An entry in the adEShdslStatusInfoTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adEShdslStatusInfoRepeaterNumber Number of repeaters/regenerators detected on this interface	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.4.2.1.1`
adEShdslStatusInfoPairReversal A stream of bytes representing the pair reversal status for each span. The MSB is for span 1 (e.g. from the H4TUC to the H4TUR/H4RU1), the next byte is for span 2 (e.g. from the H4RU1 to the H4TUR/H4RU2), and next byte…	OctetString Constraints: `range: 8-8`	`.1.3.6.1.4.1.664.5.59.1.4.2.1.2`
adEShdslStatusInfoLoopAlarmStatus A stream of byte codes identifying the current alarm status of each DSL loop point. For SHDSL:The bytes are in order from the MSB: LTU L1, LTU L2, NTU L1, NTU L2, then (if necessary) 0 = No alarms, lo…	OctetString	`.1.3.6.1.4.1.664.5.59.1.4.2.1.3`
adEShdslStatusInfoTopology A stream of bytes used to represent the topology of a given circuit. The format is show below: Version 1 --------- Octet Description ----- --------…	OctetString	`.1.3.6.1.4.1.664.5.59.1.4.2.1.4`

adEShdslStatusIfTable

table

.1.3.6.1.4.1.664.5.59.1.4.3 · 1 row entry · 1 columns

Open in standard view

This table contains entries that report the current status of each SHDSL interface.

adEShdslStatusIfEntry entry .1.3.6.1.4.1.664.5.59.1.4.3.1

An entry in the adEShdslStatusIfTable.

Indexes

IF-MIBifIndex

Column Syntax OID

adEShdslStatusIfTrainingMode

Indicates the mode of the SHDSL interface. Only valid for products that
support direct MIB access.

Enumeration

Enumerated Values:

1	ltu
2	ntu

.1.3.6.1.4.1.664.5.59.1.4.3.1.1

adEShdslTestTable

table

.1.3.6.1.4.1.664.5.59.1.5.1 · 1 row entry · 3 columns

Open in standard view

This table contains entries that allow the user to run tests at
different points along the SHDSL line.

adEShdslTestEntry entry .1.3.6.1.4.1.664.5.59.1.5.1.1

An entry in the adEShdslTestTable.

Indexes

IF-MIBifIndex adEShdslInvIndex

Column Syntax OID

adEShdslTestLoopback

Controls enabling/disabling loopbacks along each SHDSL interface

Enumerationr/w

Enumerated Values:

1	dualSidedLoopback
2	networkTransparentLoopback
3	networkNonTransparentLoopback
4	customerTransparentLoopback
5	customerNonTransparentLoopback
6	noLoopback

.1.3.6.1.4.1.664.5.59.1.5.1.1.1

adEShdslTestLoopdownAll

This object is a command to loopdown all the interfaces in the
circuit when set. This applies to all interfaces currently looped
back. There is no significance on a get. A get always returns 1,
but does not imply any st…

Enumerationr/w

Enumerated Values:

1	loopdownAllNow

.1.3.6.1.4.1.664.5.59.1.5.1.1.2

adEShdslTestinitMinMax

Reset Min/Max characteristics of the Loops. Always returns 1 on get.

Enumerationr/w

Enumerated Values:

1	resetMinMax

.1.3.6.1.4.1.664.5.59.1.5.1.1.3

adEShdslTestRepeaterPoweringTable

table

.1.3.6.1.4.1.664.5.59.1.5.2 · 1 row entry · 11 columns

Open in standard view

This table contains entries that allow the user control
the powering sequence of SHDSL repeaters.

adEShdslTestRepeaterPoweringEntry entry .1.3.6.1.4.1.664.5.59.1.5.2.1

An entry in the adEShdslTestRepeaterPoweringTable.

Indexes

IF-MIBifIndex

Column Syntax OID

adEShdslTestRepeaterPoweringState

Determines the method by which the repeaters provide power. The default mode is normal(1) where
the repeaters read their hardware dip switches to determine whether to send power on to the next
repeater. Setting the st…

Enumerationr/w

Enumerated Values:

1	normal
2	manual

.1.3.6.1.4.1.664.5.59.1.5.2.1.1

adEShdslTestRepeaterPoweringNumRepeaters

The number of repeaters to power. Only valid if adEShdslTestRepeaterPoweringState is set to manual(2).

Integer32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.664.5.59.1.5.2.1.2

adEShdslTestRepeaterPoweringTimeout

The amount of time after which adEShdslTestRepeaterPoweringState will be set back to normal(1).
A value of 0 means there is no timeout and the state will not revert to normal(1) automatically.
Only valid if adEShdslTest…

minutesInteger32r/w

Constraints:
range: 0-99999

.1.3.6.1.4.1.664.5.59.1.5.2.1.3

adEShdslTestRepeaterPoweringTimeRemaining

The amount of time remaining before adEShdslTestRepeaterPoweringState will be set back to normal(1).
Only valid if adEShdslTestRepeaterPoweringTimeout is non-zero and
adEShdslTestRepeaterPoweringState is set to manual(2…

minutesInteger32

Constraints:
range: 0-99999

.1.3.6.1.4.1.664.5.59.1.5.2.1.4

adEShdslTestRepeaterPoweringSRU1Discovered

Returns true(1) if SRU1 is present. Returns false(2) otherwise.
Only valid if adEShdslTestRepeaterPoweringState is set to manual(2).

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.664.5.59.1.5.2.1.5

adEShdslTestRepeaterPoweringSRU2Discovered

Returns true(1) if SRU2 is present. Returns false(2) otherwise.
Only valid if adEShdslTestRepeaterPoweringState is set to manual(2).

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.664.5.59.1.5.2.1.6

adEShdslTestRepeaterPoweringSRU3Discovered

Returns true(1) if SRU3 is present. Returns false(2) otherwise.
Only valid if adEShdslTestRepeaterPoweringState is set to manual(2).

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.664.5.59.1.5.2.1.7

adEShdslTestRepeaterPoweringSRU4Discovered

Returns true(1) if SRU4 is present. Returns false(2) otherwise.
Only valid if adEShdslTestRepeaterPoweringState is set to manual(2).

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.664.5.59.1.5.2.1.8

adEShdslTestRepeaterPoweringShortDetected

Returns the location of a detected powering short. This will be the repeater
at the end of the powered span. Returns none(0) if no short has been detected.
Only valid if adEShdslTestRepeaterPoweringState is set to man…

Enumeration

Enumerated Values:

0	none
1	sru1
2	sru2
3	sru3
4	sru4

.1.3.6.1.4.1.664.5.59.1.5.2.1.9

adEShdslTestRepeaterPoweringGroundFaultDetected

Returns the location of a detected powering ground fault. This will be the repeater
at the end of the powered span. Returns none(0) if no short has been detected.
Only valid if adEShdslTestRepeaterPoweringState is set…

Enumeration

Enumerated Values:

0	none
1	sru1
2	sru2
3	sru3
4	sru4

.1.3.6.1.4.1.664.5.59.1.5.2.1.10

adEShdslTestRepeaterPoweringLastErrorString

Text string describing the last error encountered when attempting to SET one of the entries
in this table.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.59.1.5.2.1.11

adEShdslTestLoopLocatorLastErrorTable

table

.1.3.6.1.4.1.664.5.59.1.5.3 · 1 row entry · 1 columns

Open in standard view

This table contains the last error message generated by operations on the entries in 
adEShdslTestLoopLocatorTable.

adEShdslTestLoopLocatorLastErrorEntry entry .1.3.6.1.4.1.664.5.59.1.5.3.1

An entry in the adEShdslTestLoopLocatorLastErrorTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adEShdslTestLoopLocatorLastErrorString Text string describing the last error encountered when attempting to SET one of the entries in adEShdslTestLoopLocatorTable.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.664.5.59.1.5.3.1.1`

adEShdslTestLoopLocatorTable

table

.1.3.6.1.4.1.664.5.59.1.5.4 · 1 row entry · 3 columns

Open in standard view

This table contains entries that allows the user to inject modulated noise to identify
a particular loop with a handset.

adEShdslTestLoopLocatorEntry entry .1.3.6.1.4.1.664.5.59.1.5.4.1

An entry in the adEShdslTestLoopLocatorTable.

Indexes

IF-MIBifIndex adEShdslInvIndex

Column Syntax OID

adEShdslTestLoopLocatorState

Activates the loop locator test, injecting modulated noise onto the specified loop. The default
mode is disabled(1). This is primarily used to diagnose wiring issues.

Enumerationr/w

Enumerated Values:

1	disabled
2	enabled

.1.3.6.1.4.1.664.5.59.1.5.4.1.1

adEShdslTestLoopLocatorTimeout

The amount of time after which adEShdslTestLoopLocatorState will be set back to disabled(1).
A value of 0 means there is no timeout and the state will not revert to disabled(1) automatically.
Only valid if adEShdslTestL…

minutesInteger32r/w

Constraints:
range: 0-99999

.1.3.6.1.4.1.664.5.59.1.5.4.1.2

adEShdslTestLoopLocatorTimeRemaining

The amount of time remaining before adEShdslTestLoopLocatorState will be set back to disabled(1).
Only valid if adEShdslTestLoopLocatorTimeout is non-zero and adEShdslTestLoopLocatorState is
set to enabled(2).

minutesInteger32

Constraints:
range: 0-99999

.1.3.6.1.4.1.664.5.59.1.5.4.1.3

adEShdslPerfCurrTable

table

.1.3.6.1.4.1.664.5.59.1.6.1 · 1 row entry · 22 columns

Open in standard view

This table contains entries that allow the user to retrieve
the current performance history values at different points
along the SHDSL line.

adEShdslPerfCurrEntry entry .1.3.6.1.4.1.664.5.59.1.6.1.1

An entry in the adEShdslPerfCurrTable.

Indexes

IF-MIBifIndex adEShdslInvIndex adEShdslSideIndex adEShdslWirePairIndex

Column	Syntax	OID
adEShdslPerfCurr15MinES Indicates the number of Errored Seconds in the current 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.1`
adEShdslPerfCurr15MinSES Indicates the number of Severely Errored Seconds in the current 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.2`
adEShdslPerfCurr15MinUAS Indicates the number of Unavailable Seconds in the current 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.3`
adEShdslPerfCurr15MinCVC Indicates the number of Code Violations in the current 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.4`
adEShdslPerfCurr15MinLOSWS Indicates the number of Loss of Sync Word Seconds in the current 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.5`
adEShdslPerfCurr15MinOS Indicates the number of Outage Seconds in the current 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.6`
adEShdslPerfCurr24HrES Indicates the number of Errored Seconds in the current 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.7`
adEShdslPerfCurr24HrSES Indicates the number of Severely Errored Seconds in the current 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.8`
adEShdslPerfCurr24HrUAS Indicates the number of Unavailable Seconds in the current 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.9`
adEShdslPerfCurr24HrCVC Indicates the number of Code Violations in the current 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.10`
adEShdslPerfCurr24HrLOSWS Indicates the number of Loss of Sync Word Seconds in the current 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.11`
adEShdslPerfCurr24HrOS Indicates the number of Outage Seconds in the current 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.12`
adEShdslPerf15MinValidIntervals The number of valid 15-Minute intervals.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.13`
adEShdslPerf24HrValidIntervals The number of valid 24-Hour intervals.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.14`
adEShdslPerfCurr15MinRetrains Indicates the number of times in the current 15 minute interval that the specified interface has transitioned from handshaking to training.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.15`
adEShdslPerfCurr15MinHandshakeFailures Indicates the number of times in the current 15 minute interval that a handshake session failed to converge on the specified interface	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.16`
adEShdslPerfCurr24HrRetrains Indicates the number of times in the current 24 hour interval that the specified interface has transitioned from handshaking to training.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.17`
adEShdslPerfCurr24HrHandshakeFailures Indicates the number of times in the current 24 hour interval that a handshake session failed to converge on the specified interface	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.18`
adEShdslPerfCurr15MinMinSNRMargin Indicates the minimum SNR margin observed in the current 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.19`
adEShdslPerfCurr15MinMaxSNRMargin Indicates the maximum SNR margin observed in the current 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.20`
adEShdslPerfCurr24HrMinSNRMargin Indicates the minimum SNR margin observed in the current 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.21`
adEShdslPerfCurr24HrMaxSNRMargin Indicates the maximum SNR margin observed in the current 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.1.1.22`

adEShdslPerfPriorTable

table

.1.3.6.1.4.1.664.5.59.1.6.2 · 1 row entry · 12 columns

Open in standard view

This table contains entries that allow the user to retrieve
the prior performance history values at different points
along the SHDSL line.

adEShdslPerfPriorEntry entry .1.3.6.1.4.1.664.5.59.1.6.2.1

An entry in the adEShdslPerfPriorTable.

Indexes

IF-MIBifIndex adEShdslInvIndex adEShdslSideIndex adEShdslWirePairIndex

Column	Syntax	OID
adEShdslPerfPrior15MinES Indicates the number of Errored Seconds in the prior 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.2.1.1`
adEShdslPerfPrior15MinSES Indicates the number of Severely Errored Seconds in the prior 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.2.1.2`
adEShdslPerfPrior15MinUAS Indicates the number of Unavailable Seconds in the prior 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.2.1.3`
adEShdslPerfPrior15MinCVC Indicates the number of Code Violations in the prior 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.2.1.4`
adEShdslPerfPrior15MinLOSWS Indicates the number of Loss of Sync Word Seconds in the prior 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.2.1.5`
adEShdslPerfPrior15MinOS Indicates the number of Outage Seconds in the prior 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.2.1.6`
adEShdslPerfPrior24HrES Indicates the number of Errored Seconds in the prior 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.2.1.7`
adEShdslPerfPrior24HrSES Indicates the number of Severely Errored Seconds in the prior 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.2.1.8`
adEShdslPerfPrior24HrUAS Indicates the number of Unavailable Seconds in the prior 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.2.1.9`
adEShdslPerfPrior24HrCVC Indicates the number of Code Violations in the prior 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.2.1.10`
adEShdslPerfPrior24HrLOSWS Indicates the number of Loss of Sync Word Seconds in the prior 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.2.1.11`
adEShdslPerfPrior24HrOS Indicates the number of Outage Seconds in the prior 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.2.1.12`

adEShdslPerfResetTable

table

.1.3.6.1.4.1.664.5.59.1.6.3 · 1 row entry · 1 columns

Open in standard view

This table contains entries that allow the user to reset
the performance history values at different points
along the SHDSL line.

adEShdslPerfResetEntry entry .1.3.6.1.4.1.664.5.59.1.6.3.1

An entry in the adEShdslPerfResetTable.

Indexes

IF-MIBifIndex adEShdslInvIndex adEShdslSideIndex adEShdslWirePairIndex

Column Syntax OID

adEShdslPerfReset

Resets the performance history values on the selected interface.

Enumerationr/w

Enumerated Values:

reset

.1.3.6.1.4.1.664.5.59.1.6.3.1.1

adEShdslPerf15MinIntTable

table

.1.3.6.1.4.1.664.5.59.1.6.4 · 1 row entry · 11 columns

Open in standard view

This table contains entries that allow the user to retrieve
the 15 minute performance history values at different points
along the SHDSL line.

adEShdslPerf15MinIntEntry entry .1.3.6.1.4.1.664.5.59.1.6.4.1

An entry in the adEShdslPerf15MinIntTable.

Indexes

IF-MIBifIndex adEShdslInvIndex adEShdslSideIndex adEShdslWirePairIndex adEShdslPerf15MinIntNumber

Column	Syntax	OID
adEShdslPerf15MinIntNumber 15-minute performance interval. Interval 1 represents the most recent previous interval. Interval 96 represents 24 hours ago. Intervals 2 through 96 are optional.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.4.1.1`
adEShdslPerf15MinIntES Indicates the number of Errored Seconds in the selected 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.4.1.2`
adEShdslPerf15MinIntSES Indicates the number of Severely Errored Seconds in the selected 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.4.1.3`
adEShdslPerf15MinIntUAS Indicates the number of Unavailable Seconds in the selected 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.4.1.4`
adEShdslPerf15MinIntCVC Indicates the number of Code Violations in the selected 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.4.1.5`
adEShdslPerf15MinIntLOSWS Indicates the number of Loss of Sync Word Seconds in the selected 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.4.1.6`
adEShdslPerf15MinIntOS Indicates the number of Outage Seconds in the selected 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.4.1.7`
adEShdslPerf15MinIntRetrains Indicates the number of times in the selected 15 minute interval that the specified interface has transitioned from handshaking to training.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.4.1.8`
adEShdslPerf15MinIntHandshakeFailures Indicates the number of times in the selected 15 minute interval that a handshake session failed to converge on the specified interface	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.4.1.9`
adEShdslPerf15MinIntMinSNRMargin Indicates the minimum SNR margin observed in the specified 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.4.1.10`
adEShdslPerf15MinIntMaxSNRMargin Indicates the maximum SNR margin observed in the specified 15 minute interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.4.1.11`

adEShdslPerf24HrIntTable

table

.1.3.6.1.4.1.664.5.59.1.6.5 · 1 row entry · 11 columns

Open in standard view

This table contains entries that allow the user to retrieve
the 24 hour performance history values at different points
along the SHDSL line.

adEShdslPerf24HrIntEntry entry .1.3.6.1.4.1.664.5.59.1.6.5.1

An entry in the adEShdslPerf24HrIntTable.

Indexes

IF-MIBifIndex adEShdslInvIndex adEShdslSideIndex adEShdslWirePairIndex adEShdslPerf24HrIntNumber

Column	Syntax	OID
adEShdslPerf24HrIntNumber 24-hour performance interval. Interval 1 represents the most recent previous interval. Interval 7 represents 7 days ago. Intervals 2 through 7 are optional. Also, intervals 8 through 30 are optional.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.5.1.1`
adEShdslPerf24HrIntES Indicates the number of Errored Seconds in the selected 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.5.1.2`
adEShdslPerf24HrIntSES Indicates the number of Severely Errored Seconds in the selected 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.5.1.3`
adEShdslPerf24HrIntUAS Indicates the number of Unavailable Seconds in the selected 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.5.1.4`
adEShdslPerf24HrIntCVC Indicates the number of Code Violations in the selected 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.5.1.5`
adEShdslPerf24HrIntLOSWS Indicates the number of Loss of Sync Word Seconds in the selected 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.5.1.6`
adEShdslPerf24HrIntOS Indicates the number of Outage Seconds in the selected 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.5.1.7`
adEShdslPerf24HrIntRetrains Indicates the number of times in the selected 24 hour interval that the specified interface has transitioned from handshaking to training.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.5.1.8`
adEShdslPerf24HrIntHandshakeFailures Indicates the number of times in the selected 24 hour interval that a handshake session failed to converge on the specified interface	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.5.1.9`
adEShdslPerf24HrIntMinSNRMargin Indicates the minimum SNR margin observed in the specified 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.5.1.10`
adEShdslPerf24HrIntMaxSNRMargin Indicates the maximum SNR margin observed in the specified 24 hour interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.6.5.1.11`

adEShdslPerfPortResetTable

table

.1.3.6.1.4.1.664.5.59.1.6.6 · 1 row entry · 1 columns

Open in standard view

This table contains entries that allow the user to reset
the performance history values for each SHDSL port.

adEShdslPerfPortResetEntry entry .1.3.6.1.4.1.664.5.59.1.6.6.1

An entry in the adEShdslPerfPortResetTable.

Indexes

IF-MIBifIndex

Column Syntax OID

adEShdslPerfPortReset

Resets the performance history values for all interfaces connected to
the selected port.

Enumerationr/w

Enumerated Values:

reset

.1.3.6.1.4.1.664.5.59.1.6.6.1.1

adEShdslSpliceDetectionTable

table

.1.3.6.1.4.1.664.5.59.1.7.1 · 1 row entry · 7 columns

Open in standard view

This table contains entries that allow the user to retrieve
the splice detection data.

adEShdslSpliceDetectionEntry entry .1.3.6.1.4.1.664.5.59.1.7.1.1

An entry in the adEShdslSpliceDetectionTable.

Indexes

IF-MIBifIndex adEShdslInvIndex adEShdslSideIndex adEShdslWirePairIndex

Column Syntax OID

adEShdslSpliceDetectionSummary

The splice detection summary for this endpoint.
A series of items in the following format: STR0.STR1.STR2 ... STR14
representing the daily splice detection summary. The first item (STR1)
represents the current day, th…

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.59.1.7.1.1.1

adEShdslSpliceCounts

A series of numbers (0-99) in the following format: N0.N1.N3 ... N17
These values represent the splice detection histogram values for the
corresponding distance values from adEShdslSpliceDistances. Note that
some rate…

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.59.1.7.1.1.2

adEShdslSpliceDistances

A series of distances in the following format: D0.D1.D3 ... D17
These values represent the distances corresponding to each bucket
in the splice detection histogram. Note that some rates may not
support 18 distances

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.59.1.7.1.1.3

adEShdslSpliceRestart

Restarts the splice detection on the selected interface. This
will cause all 24 hour counts for this interface to be cleared.

Enumerationr/w

Enumerated Values:

restart

.1.3.6.1.4.1.664.5.59.1.7.1.1.4

adEShdslSpliceDistanceType

Sets the unit of measurement used when returning the values for
adEShdslSpliceDistances. This value is set globally for the unit
and will return the same value for all interfaces on the unit.

Enumerationr/w

Enumerated Values:

1	meters
2	feet

.1.3.6.1.4.1.664.5.59.1.7.1.1.5

adEShdslSpliceRate

A last trained rate during the current interval. The value returned is the
rate in 64kbps increments (N x 64k).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.59.1.7.1.1.6

adEShdslSpliceBadSpliceDetected

Returns true if a bad splice has been detected on the specified interface. Returns false otherwise.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.664.5.59.1.7.1.1.7

adEShdslSpliceDet24HrIntTable

table

.1.3.6.1.4.1.664.5.59.1.7.2 · 1 row entry · 4 columns

Open in standard view

This table contains entries that allow the user to retrieve
24 hour splice detection historical interval data.

adEShdslSpliceDet24HrIntEntry entry .1.3.6.1.4.1.664.5.59.1.7.2.1

An entry in the adEShdslSpliceDet24HrIntTable.

Indexes

IF-MIBifIndex adEShdslInvIndex adEShdslSideIndex adEShdslWirePairIndex adEShdslSpliceDet24HrIntNumber

Column	Syntax	OID
adEShdslSpliceDet24HrIntNumber 24-hour splice detect interval. Interval 1 represents the most recent previous interval. Interval 7 represents 7 days ago. Intervals 2 through 7 are optional.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.7.2.1.1`
adEShdslSplice24HrIntCounts A series of numbers (0-99) in the following format: N0.N1.N3 ... N17 These values represent the splice detection histogram values for the corresponding distance values from adEShdslSpliceDistances for the selected inte…	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.664.5.59.1.7.2.1.2`
adEShdslSplice24HrIntDistances A series of distances in the following format: D0.D1.D3 ... D17 These values represent the distances corresponding to each bucket in the splice detection histogram for the selected interval. Note that some rates may no…	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.664.5.59.1.7.2.1.3`
adEShdslSplice24HrIntRate A last trained rate during the specified interval. The value returned is the rate in 64kbps increments (N x 64k).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.7.2.1.4`

adEShdslSpliceDet15MinCurrTable

table

.1.3.6.1.4.1.664.5.59.1.7.3 · 1 row entry · 3 columns

Open in standard view

This table contains entries that allow the user to retrieve
15 minute splice detection current interval data.

adEShdslSpliceDet15MinCurrEntry entry .1.3.6.1.4.1.664.5.59.1.7.3.1

An entry in the adEShdslSpliceDet15MinCurrTable.

Indexes

IF-MIBifIndex adEShdslInvIndex adEShdslSideIndex adEShdslWirePairIndex

Column	Syntax	OID
adEShdslSplice15MinCurrCounts A series of numbers (0-99) in the following format: N0.N1.N3 ... N17 These values represent the splice detection histogram values for the corresponding distance values from adEShdslSpliceDistances for the selected inte…	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.664.5.59.1.7.3.1.1`
adEShdslSplice15MinCurrDistances A series of distances in the following format: D0.D1.D3 ... D17 These values represent the distances corresponding to each bucket in the splice detection histogram for the current interval. Note that some rates may not…	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.664.5.59.1.7.3.1.2`
adEShdslSplice15MinCurrRate A last trained rate during the current interval. The value returned is the rate in 64kbps increments (N x 64k).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.7.3.1.3`

adEShdslSpliceDet15MinIntTable

table

.1.3.6.1.4.1.664.5.59.1.7.4 · 1 row entry · 4 columns

Open in standard view

This table contains entries that allow the user to retrieve
15 minute splice detection historical interval data.

adEShdslSpliceDet15MinIntEntry entry .1.3.6.1.4.1.664.5.59.1.7.4.1

An entry in the adEShdslSpliceDet15MinIntTable.

Indexes

IF-MIBifIndex adEShdslInvIndex adEShdslSideIndex adEShdslWirePairIndex adEShdslSpliceDet15MinIntNumber

Column	Syntax	OID
adEShdslSpliceDet15MinIntNumber 15 minute splice detect interval. Interval 1 represents the most recent previous interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.7.4.1.1`
adEShdslSplice15MinIntCounts A series of numbers (0-99) in the following format: N0.N1.N3 ... N17 These values represent the splice detection histogram values for the corresponding distance values from adEShdslSpliceDistances for the selected inte…	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.664.5.59.1.7.4.1.2`
adEShdslSplice15MinIntDistances A series of distances in the following format: D0.D1.D3 ... D17 These values represent the distances corresponding to each bucket in the splice detection histogram for the selected interval. Note that some rates may no…	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.664.5.59.1.7.4.1.3`
adEShdslSplice15MinIntRate A last trained rate during the specified interval. The value returned is the rate in 64kbps increments (N x 64k).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.59.1.7.4.1.4`