ADTRAN-ETHERNET-DSLAM-FLOW-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

204

adGenEthernetInterfaceTable

table

.1.3.6.1.4.1.664.5.70.2.1 · 1 row entry · 6 columns

Open in standard view

This table specifies the parameters specific to a Interface.
A Interface can be a physical ethernet port, an EFM Bonding
group, an ATM VCL, a PON Gem port,
or other logical ethernet customer port. It
serves primarily as an attach point for
maps and filters.

adGenEthernetInterfaceEntry entry .1.3.6.1.4.1.664.5.70.2.1.1

An entry in the adGenEthernetInterfaceTable.

Indexes

IF-MIBifIndex adGenEthernetInterfaceLogicalIndex

Column Syntax OID

adGenEthernetInterfaceLogicalIndex

An implementation specific index defining a Logical Interface on a particular physical ifIndex.
It is the same number as the subinterface in the CLI. For example, this index would be zero for
ethernet ports, EFM bonding…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.1.1.1

adGenEthernetInterfaceMaxMACAddresses

Specify the maximum number of MAC addresses
for this Interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.1.1.2

adGenEthernetInterfaceFlowList

A string of indices of flows applied to this
Interface.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.70.2.1.1.3

adGenEthernetInterfaceSourceAuthentication

If this is enabled then only authenticated flows will pass traffic for this Ethernet
Interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.664.5.70.2.1.1.4

adGenEthernetInterfaceType

Describes the interface type of ethernet interface

ADTRAN-SHARED-CND-SYSTEM-TC-MIBGenSystemInterfaceType

Textual Convention: ADTRAN-SHARED-CND-SYSTEM-TC-MIBGenSystemInterfaceType Enumeration

Type Values:

1	unknown
2	ds1
3	dsx1
4	e1
5	dsxE1
6	gigabitEthernet
7	ds3
8	portChannel
9	tenGigabitEthernet
10	erps
11	shdsl
12	adsl
13	vdsl
14	efmGroup
15	efmLink
16	efmPort
17	lagGroup
18	pppGroup
19	imaGroup
20	imaLink
21	atm
22	fxs
23	hdsl2
24	hdsl4
25	adsl2
26	vdsl2
27	ethernet
28	fast
29	interleave
30	hdsl
31	gpon
32	ipHost
33	frpvc
34	sonet
35	otn
36	wan
37	defaultEthernet
38	genericBridge
39	fibreChannel
40	otnTenGigabitEthernet
41	hundredGigabitEthernet
42	otnHundredGigabitEthernet
43	xgigabitEthernet

.1.3.6.1.4.1.664.5.70.2.1.1.5

adGenEthernetInterfaceTypeSpecific

OctetString

.1.3.6.1.4.1.664.5.70.2.1.1.6

adGenEthernetDslamFlowTable

table

.1.3.6.1.4.1.664.5.70.2.2 · 1 row entry · 77 columns

Open in standard view

This table consists of the mapping from a user ethernet interface
into an S-Tag or S-Tag/C-Tag.

adGenEthernetDslamFlowEntry entry .1.3.6.1.4.1.664.5.70.2.2.1

An entry in the adGenEthernetDslamFlowTable. Each entry is an
entry in a list of maps that can be applied to a user
port.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowIndex

Column Syntax OID

adGenEthernetDslamFlowIndex

Index that specifies an individual
map.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.1

adGenEthernetDslamFlowName

This object is provided so that the user can identify
the ethernet flow uniquely. The profile will be stored in the EMS by
name and applied to the user-specified flows.
This profile name is NOT intended to be used in th…

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.664.5.70.2.2.1.2

adGenEthernetDslamFlowTrafficDirection

Specify the traffic direction to which this
map applies.
Upstream:
Customer C-Tag, Pbit, Ethertype,
DSCP, and IP Protocol are used to classify traffic
upstream.
The Upstream Pbit Mode specifies how PBits are…

Enumerationr/w

Enumerated Values:

1	upstream
2	downstream
3	bidirectional

.1.3.6.1.4.1.664.5.70.2.2.1.3

adGenEthernetDslamFlowNetworkSTag

Specify the STag seen on network traffic.

Integer32r/w

Constraints:
range: 2-4094

.1.3.6.1.4.1.664.5.70.2.2.1.4

adGenEthernetDslamFlowNetworkCTag

Specify the CTag seen on network ingress/egress traffic. A value of 4095
indicates that no Network CTag is used. A value of 4096 indicates that
that the Network CTag should match the CEVlan in the upstream direction
an…

Integer32r/w

Constraints:
range: 2-4096

.1.3.6.1.4.1.664.5.70.2.2.1.5

adGenEthernetDslamFlowCEVlan

Specify the CEVlan seen on customer ingress/egress traffic. A value of 4095
indicates that no CEVlan is present. A value of 4097 indicates that customer traffic can
be tagged or untagged. A value of 4098 indicates that…

Integer32r/w

Constraints:
range: 0-4098

.1.3.6.1.4.1.664.5.70.2.2.1.6

adGenEthernetDslamFlowDownstreamForwardingMode

Specify how ethernet frames on this flow are forwarded through the switch. This
value is bitmasked so that forwarding modes can be combined.
src (0x1) - Use the network port as the source for forwarding
flow (0x2) - Use…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.7

adGenEthernetDslamFlowDownstreamPbitMethod

Specify the PBit mapping mode in from the
network to customer.
Inherit - downstream traffic should egress
the Interface with the priority from the
network.
Marked - downstream traffic should always
egress the I…

Enumerationr/w

Enumerated Values:

1	inherit
2	marked
3	mapped

.1.3.6.1.4.1.664.5.70.2.2.1.8

adGenEthernetDslamFlowDownstreamPbitMarking

If the network Pbit mode is marked then this variable
specifies the downstream pBit.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.664.5.70.2.2.1.9

adGenEthernetDslamFlowDownstreamPbitMapping

If the network Pbit mode is mapped then this variable
specifies the ingress/egress priority mapping index.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.10

adGenEthernetDslamFlowNetworkIngressPbit

This option is a bitmask used to specify a list of allowable P-bit values
of the S-Tag ingressing from the network. A value of
255 indicates that this value is not used to classify network ingress
traffic.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.664.5.70.2.2.1.11

adGenEthernetDslamFlowNetworkIngressEtherType

Specify the EtherType value that will be used to
classify NetworkIngress traffic. A value of 0x0000
indicates this filter is disabled.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.12

adGenEthernetDslamFlowNetworkIngressDSCP

Specify a single DSCP value that will be used to classify
NetworkIngress traffic. A value of 64 indicates this filter
is disabled. If multiple DSCP values should be specified,
use adGenEthernetDslamFlowNetworkIngressDS…

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.664.5.70.2.2.1.13

adGenEthernetDslamFlowNetworkIngressIPProtocolID

Specify the IP Protocol ID that will be used to
classify NetworkIngress traffic. A value of 0x0000
indicates this filter is disabled.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.14

adGenEthernetDslamFlowUpstreamForwardingMode

Specify how ethernet frames on this flow are forwarded through the switch. This
value is bitmasked so that forwarding modes can be combined.
src (0x1) - Use the ethernet interface as the source for forwarding
flow (0x2)…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.15

adGenEthernetDslamFlowUpstreamSTagPbitMethod

Specify the PBit mapping mode in from the
Customer to Network STag.
Inherit - upstream STags should egress
with the priority from the customer.
Marked - upstream STags should always
egress with the specified prior…

Enumerationr/w

Enumerated Values:

1	inherit
2	marked
3	mapped

.1.3.6.1.4.1.664.5.70.2.2.1.16

adGenEthernetDslamFlowUpstreamSTagPbitMarking

If the Customer Pbit mode is marked then this variable
specifies the upstream STag pBit.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.664.5.70.2.2.1.17

adGenEthernetDslamFlowUpstreamSTagPbitMapping

If the Customer Pbit mode is mapped then this variable
specifies the ingress/egress STag priority mapping index.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.18

adGenEthernetDslamFlowUpstreamCTagPbitMethod

Specify the CTag PBit mapping mode in from the
Customer to Network.
Inherit - upstream traffic should egress
with the priority from the customer.
Marked - upstream traffic should always
egress with the specified p…

Enumerationr/w

Enumerated Values:

1	inherit
2	marked
3	mapped

.1.3.6.1.4.1.664.5.70.2.2.1.19

adGenEthernetDslamFlowUpstreamCTagPbitMarking

If the Customer Pbit mode is marked then this variable
specifies the upstream CTag pBit.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.664.5.70.2.2.1.20

adGenEthernetDslamFlowUpstreamCTagPbitMapping

If the Customer Pbit mode is mapped then this variable
specifies the ingress/egress CTag priority mapping index.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.21

adGenEthernetDslamFlowCustomerIngressPbit

This option is a bitmask used to specify a list of allowable P-bit values
of the CEVlan ingressing from the customer. A value of
255 indicates that this value is not used to classify customer ingress
traffic.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.664.5.70.2.2.1.22

adGenEthernetDslamFlowCustomerIngressEtherType

Specify the EtherType value that will be used to
classify CustomerIngress traffic. A value of 0x0000
indicates this filter is disabled.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.23

adGenEthernetDslamFlowCustomerIngressDSCP

Specify a single DSCP value that will be used to classify
CustomerIngress traffic. A value of 64 indicates this filter
is disabled. If multiple DSCP values should be specified,
use adGenEthernetDslamFlowCustomerIngress…

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.664.5.70.2.2.1.24

adGenEthernetDslamFlowCustomerIngressIPProtocolID

Specify the IP Protocol ID that will be used to
classify CustomerIngress traffic. A value of 0x0000
indicates this filter is disabled.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.25

adGenEthernetDslamFlowCustomerIngressBroadcast

This variable specifies whether or not to
drop CustomerIngress broadcasts on this map.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.2.1.26

adGenEthernetDslamFlowCustomerIngressMulticast

This variable specifies whether or not to
drop CustomerIngress multicasts on this map.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.2.1.27

adGenEthernetDslamFlowCustomerIngressUnicast

This variable specifies whether or not to
drop CustomerIngress unicasts on this map.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.2.1.28

adGenEthernetDslamFlowCustomerIngressPolicer

Indicate which policer to on customer ingress traffic. A value of 0 means no
policer is used on customer ingress traffic. A non-zero value represents
a row from the adGenEthernetDslamFlowProfilesTable.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.29

adGenEthernetDslamFlowEncapsMode

Encapsulation mode/type if applicable; 'notApplicable' otherwise. IPoE and PPPoE
specify a particular protocol over ethernet. 'Ethernet' specifies that any protocol over
ethernet is applicable including IP and PPP.

Enumerationr/w

Enumerated Values:

1	ipoe
2	pppoe
3	pppoa
4	notApplicable
5	atmoe
6	pppoaVcMux
7	autoDetect
8	ethernet

.1.3.6.1.4.1.664.5.70.2.2.1.30

adGenEthernetDslamFlowManualAddrAging

Manual Address Aging in minutes for unicast MACs.

Integer32r/w

Constraints:
range: 1-1440

.1.3.6.1.4.1.664.5.70.2.2.1.31

adGenEthernetDslamFlowIntermedAgent

Enable/disable Intermediate Agent if applicable; 'notApplicable' otherwise.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.2.1.32

adGenEthernetDslamFlowDhcpRelay

Set the DHCPv4 processing mode:

Enabled(1)- Use DHCPv4 for subscriber authentication
Disabled(2)- Discard DHCPv4
Not Applicable(3)- Unused
Transparent(4)- Ignore DHCPv4
Snoop(5)- Process DHCPv4 without pe…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable
4	transparent
5	snoop

.1.3.6.1.4.1.664.5.70.2.2.1.33

adGenEthernetDslamFlowOption82Insert

Enable/disable Option 82 Insertion if applicable; 'notApplicable' otherwise.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.2.1.34

adGenEthernetDslamFlowLearnedIpAddrAgingMethod

Method for Learned IP Address Aging if applicable; 'notApplicable' otherwise.

Enumerationr/w

Enumerated Values:

1	lease
2	fixed
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.2.1.35

adGenEthernetDslamFlowIgmpProcessing

Method for IGMP Processing if applicable; 'notApplicable' otherwise.

Enumerationr/w

Enumerated Values:

1	block
2	forward
3	snooping
4	proxy
5	notApplicable
6	transparent
7	forking

.1.3.6.1.4.1.664.5.70.2.2.1.36

adGenEthernetDslamFlowIgmpVersion

IGMP Version if applicable: v3 implies v1, v2, and v3;
v2 implies v1 and v2; v1 is v1 only; 'notApplicable' otherwise.

Enumerationr/w

Enumerated Values:

1	v1
2	v2
3	v3
4	notApplicable

.1.3.6.1.4.1.664.5.70.2.2.1.37

adGenEthernetDslamFlowLastMemberQueryInterval

Last Member Query Interval in milliseconds.
This is the amount of time between Queries. Low
value results in faster detection of missed leaves.

Integer32r/w

Constraints:
range: 100-65535

.1.3.6.1.4.1.664.5.70.2.2.1.38

adGenEthernetDslamFlowLastMemberQueryCount

Last Member Query Count. This is the number of
queries before declaring no membership of a group
(channel).

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.664.5.70.2.2.1.39

adGenEthernetDslamFlowImmediateLeave

Enable/disable Immediate Leave if applicable; 'notApplicable' otherwise.
Disable is the equivalent of setting Last Member Query Count to 0.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.2.1.40

adGenEthernetDslamFlowMaxAllowedMcastGroups

Maximum Allowed Non-Guaranteed Multicast Groups. This value is only
considered if multicast groups are enabled.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.41

adGenEthernetDslamFlowDhcpPPPoERemoteId

Enable/disable Remote ID insertion into DHCPv4 Option 82 or
DHCPv6 relay agent in option 37 or PPPoE Vendor Specific tag
if applicable.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.2.1.42

adGenEthernetDslamFlowDhcpPPPoELoopCharacteristics

Enable/disable loop characteristics insertion into DHCPv4 Option 82 or
DHCPv6 relay agent option 17 (vendor specific) loop characteristics or
PPPoE Vendor Specific tag if applicable.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.2.1.43

adGenEthernetDslamFlowDhcpPPPoECircuitIdFormat

Used to provision the format of the circuit ID string. This
string is returned by the PPPoE intermediate agent and
DHCP relay agent in v4 sub option 1 or in v6 option 18.
TR-101 states that the format of the circuit ID
…

OctetStringr/w

Constraints:
range: 0-63

.1.3.6.1.4.1.664.5.70.2.2.1.44

adGenEthernetDslamFlowPPPoASessionTimeout

Used to set the PPPoA Session timeout when the
mapping is provisioned for PPPoA encapsulation.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.45

adGenEthernetDslamFlowInterfaceIfIndex

Specifies the IfIndex of the Interface this mapping is tied to.
If the value is 0 then this map is not applied to a Interface. This
value must be nonzero before the flow can be activated.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.46

adGenEthernetDslamFlowInterfaceLogicalIndex

Specifies the logical indes within the ifIndex of the ethernet interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.47

adGenEthernetDslamFlowLastErrorString

Returns the reason for the last error.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.70.2.2.1.48

adGenEthernetDslamFlowRowStatus

This object is used to create
a new row or modify or delete an
existing map in this table. A row cannot be set to active
until the ethernet interface ifIndex is set.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.664.5.70.2.2.1.49

adGenEthernetDslamFlowNetworkIngressPolicer

Indicate which policer to on network ingress traffic. A value of 0 means no
policer is used on network ingress traffic. A non-zero value represents
a row from the adGenEthernetDslamFlowProfilesTable.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.50

adGenEthernetDslamFlowUpstreamDiscard

Indicate that any packets matching the upstream criteria will be discarded.

Enumerationr/w

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.664.5.70.2.2.1.51

adGenEthernetDslamFlowMaxAllowedMulticastBandwidth

Specify the maximum downstream bandwidth(kbps) available for this flow.
This value is only considered if multicast bandwidth is enabled.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.53

adGenEthernetDslamFlowMaxAllowedMulticastBandwidthEnable

When enabled joins for multicast streams by the subscriber are checked to make
sure that the maximum multicast bandwidth will not be exceeded by the join.

Enumerationr/w

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.664.5.70.2.2.1.54

adGenEthernetDslamFlowProfileName

This object is provided so that the user can describe a particular flow by any
means desired. This is not related to policers in the adGenEthernetDslamFlowProfilesTable.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.664.5.70.2.2.1.55

adGenEthernetDslamFlowMaxAllowedMcastGroupsEnable

When enabled joins for multicast streams by the subscriber are checked to make
sure that the maximum number of non-guarenteed multicast groups will not be
exceeded by the join.

Enumerationr/w

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.664.5.70.2.2.1.56

adGenEthernetDslamFlowNetworkIngressDSCPList

This object is a string used to specify the DSCP values that will
be used to classify NetworkIngress traffic. The DSCP values can
be specified using both list and range notation. For example,
to specify DSCP values 27…

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.70.2.2.1.57

adGenEthernetDslamFlowCustomerIngressDSCPList

This object is a string used to specify the DSCP values that will
be used to classify CustomerIngress traffic. The DSCP values can
be specified using both list and range notation. For example,
to specify DSCP values 2…

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.70.2.2.1.58

adGenEthernetDslamFlowIgmpRouterIP

The source IP address that the DSLAM places in IGMP messages destined
for the subscriber. This value only applies when IGMP is in proxy mode.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.664.5.70.2.2.1.59

adGenEthernetDslamFlowActivationStatus

Provides an indication of whether the flow is actually activated.
If adGenEthernetDslamFlowRowStatus is not active, this object will
return notActivated. When rowStatus is successfully set to active,
the flow begins at…

Enumeration

Enumerated Values:

1	notActivated
2	inProgress
3	active
4	error

.1.3.6.1.4.1.664.5.70.2.2.1.60

adGenEthernetDslamFlowARPProcessing

Set the ARP processing mode.

Enumerationr/w

Enumerated Values:

1	block
2	proxy
3	transparent

.1.3.6.1.4.1.664.5.70.2.2.1.61

adGenEthernetDslamFlowPPPoEProcessing

Set the PPPoE processing mode.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable
4	transparent

.1.3.6.1.4.1.664.5.70.2.2.1.62

adGenEthernetDslamFlowSubscriberIpRowCreateError

Returns the reason for the last row create error
on Subscriber Access Static IP Table.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.70.2.2.1.63

adGenEthernetDslamFlowDhcpPPPoEVendorNumber

Used to provision the IANA Enterprise Number.
This Number is returned by the PPPoE intermediate agent and
DHCPv4 relay agent in sub option 9.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.2.1.64

adGenEthernetDslamFlowDhcpPPPoEVendorIdFormat

Used to provision the format of the vendor ID string. This
string is returned by the PPPoE intermediate agent and
DHCPv4 relay agent in sub option 9. TR-101 states that the
format of the vendor ID should be user definea…

OctetStringr/w

Constraints:
range: 0-63

.1.3.6.1.4.1.664.5.70.2.2.1.65

adGenEthernetDslamFlowEvcName

Set the name of the EVC that this flow is connected to.
When this object is set, other objects that relate to
EVC parameters (e.g. network S-tag, MAC switching, etc.)
will be changed to match the named EVC parameters.

OctetStringr/w

Constraints:
range: 1-50

.1.3.6.1.4.1.664.5.70.2.2.1.66

adGenEthernetDslamFlowEvcRoot

Indicates whether the mapped interface is connected to the
EVC as a root or a leaf. Root interfaces may forward to
leaves and other roots; leaf interfaces may only forard to
roots. When enabled, the mapped interface i…

Enumerationr/w

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.664.5.70.2.2.1.67

adGenEthernetDslamFlowDhcpv6Mode

Set the DHCPv6 processing mode:

authenticate(1)- Use DHCPv6 for subscriber authentication
block(2)- Discard DHCPv6
transparent(3)- Ignore DHCPv6
snoop(4)- Process DHCPv6 without performing authentication
…

Enumerationr/w

Enumerated Values:

1	authenticate
2	block
3	transparent
4	snoop
5	sameAsDhcpv4

.1.3.6.1.4.1.664.5.70.2.2.1.68

adGenEthernetDslamFlowDhcpv6RelayAgent

Set the DHCPv6 Relay Agent Mode:
enabled(1) - enable the relay agent
disabled(2) - disable the relay agent
sameAsDhcpv4(3) - use the same mode on DHCPv6 Relay Agent as what is provisioned on adGenEthernetDslamFlowOption…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	sameAsDhcpv4

.1.3.6.1.4.1.664.5.70.2.2.1.69

adGenEthernetDslamFlowDhcpv6RelayAgentTrusted

Enable/disable DHCPv6 relay agent trusted mode.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.664.5.70.2.2.1.70

adGenEthernetDslamFlowDhcpPPPoERemoteIdFormat

Used to provision the format of the remote ID string. This
string is returned by the DHCPv4 relay agent in option 82
or DHCPv6 relay agent in option 37 or in PPPoE Vendor Specific tag.
TR-101 states that the format of t…

OctetStringr/w

Constraints:
range: 0-63

.1.3.6.1.4.1.664.5.70.2.2.1.71

adGenEthernetDslamFlowDownstreamQosMapProfile

The attached QoS Map Profile from the adGenQosMapProfileProvisioningTable
used to classify downstream traffic into egress queues. An empty string
signifies that the default system cos-map will be used instead of a
cust…

OctetStringr/w

Constraints:
range: 1-80

.1.3.6.1.4.1.664.5.70.2.2.1.72

adGenEthernetDslamFlowUpstreamChannel

This OID specifies the upstream channel connected to this evc-map.
Setting the channel to 0 selects the system default channel.
When the evc-map is connected to an UNI interface the user can specify
a channel number in …

Integer32r/w

Constraints:
range: 0-4

.1.3.6.1.4.1.664.5.70.2.2.1.73

adGenEthernetDslamFlowDhcpv6CurrMode

View the current DHCPv6 processing mode:

Authenticate(1)- Use DHCPv6 for subscriber authentication
Block(2)- Discard DHCPv6
Transparent(3)- Ignore DHCPv6
Snoop(4)- Process DHCPv6 without performing authen…

Enumeration

Enumerated Values:

1	authenticate
2	block
3	transparent
4	snoop

.1.3.6.1.4.1.664.5.70.2.2.1.74

adGenEthernetDslamFlowDhcpPPPoEVendorIdInsert

Enable/disable Vendor ID information insertion into DHCPv4 Option 82
or DHCPv6 relay agent. Enabling this feature will insert the
adGenEthernetDslamFlowDhcpPPPoEVendorNumber and
adGenEthernetDslamFlowDhcpPPPoEVendorIdFo…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.664.5.70.2.2.1.75

adGenEthernetDslamFlowMatchSourceMacList

Contains a list of source MAC addresses and mask on which to match
in the following format:

Byte number(s) Description
1 Number of match source MAC address entries (N, 0 to M,
…

OctetStringr/w

.1.3.6.1.4.1.664.5.70.2.2.1.76

adGenEthernetDslamFlowMatchSourceMacLastErrorString

Returns the reason for the last error when setting adGenEthernetDslamFlowMatchSourceMacList or
adGenEthernetDslamFlowRev2MatchSourceLastErrorString.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.70.2.2.1.77

adGenEthernetDslamFlowMatchNonIp

Enables/disables matching non-IP customer ingress traffic.
True - enables match non-IP.
False - disables match non-IP.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.664.5.70.2.2.1.78

adGenEthernetDslamFlowIndexNextTable

table

.1.3.6.1.4.1.664.5.70.2.3 · 1 row entry · 1 columns

Open in standard view

This table is a read only table that has one row per slot. It returns the
next available ethernet dslam flow index to be uses as the index for the
EthernetDslamFlow table.

adGenEthernetDslamFlowIndexNextEntry entry .1.3.6.1.4.1.664.5.70.2.3.1

An entry in the adGenEthernetDslamFlowIndexNextTable.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenEthernetDslamFlowIndexNext This variable returns the next available Ethernet Flow Index.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.70.2.3.1.1`

adGenEthernetDslamFlowProfilesTable

table

.1.3.6.1.4.1.664.5.70.2.4 · 1 row entry · 12 columns

Open in standard view

The Profile (i.e. Policer) provisioning table. Policers can be
created and applied to multiple maps or Interfaces. If a policer
is applied to a Interface then all maps applied to that Interface
follow the Interface's policer.

adGenEthernetDslamFlowProfilesEntry entry .1.3.6.1.4.1.664.5.70.2.4.1

An entry in the Policer provisioning table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowProfileIndex

Column Syntax OID

adGenEthernetDslamFlowProfileIndex

This variable is used as an index into the Policer table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.4.1.1

adGenEthernetDslamFlowProfileAlias

A user configurable alias for the Policer. Upon creation of
the Policer, the associated alias will default to a unique value.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.664.5.70.2.4.1.2

adGenEthernetDslamFlowProfileCIR

This variable is used to configure the CIR (in kbps).

Integer32r/w

Constraints:
range: 0-100000

.1.3.6.1.4.1.664.5.70.2.4.1.3

adGenEthernetDslamFlowProfileCBS

This variable is used to configure the CBS (in bytes).

Integer32r/w

Constraints:
range: 0-999999

.1.3.6.1.4.1.664.5.70.2.4.1.4

adGenEthernetDslamFlowProfileEIR

This variable is used to configure the EIR (in kbps).
A null string is used to configure the EIR for no limit.
The maximum CIR value is 100000.

Integer32r/w

Constraints:
range: 0-100000

.1.3.6.1.4.1.664.5.70.2.4.1.5

adGenEthernetDslamFlowProfileEBS

This variable is used to configure the EBS (in bytes).

Integer32r/w

Constraints:
range: 0-999999

.1.3.6.1.4.1.664.5.70.2.4.1.6

adGenEthernetDslamFlowProfileLastErrorString

Returns the reason for the last error.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.70.2.4.1.7

adGenEthernetDslamFlowProfileRowStatus

This object is used to create
a new row or modify or delete an
existing row in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.664.5.70.2.4.1.8

adGenEthernetDslamFlowProfileActualCIR

This variable shows the actual CIR (in kbps). Policer
attributes are set to the closest possible value in
hardware based on platform speed, which means the
configured CIR may not be the same as the actual CIR.

Integer32

Constraints:
range: 0-100000

.1.3.6.1.4.1.664.5.70.2.4.1.9

adGenEthernetDslamFlowProfileActualCBS

This variable shows the actual CBS (in bytes). Policer
attributes are set to the closest possible value in
hardware based on platform speed, which means the
configured CBS may not be the same as the actual CBS.

Integer32

Constraints:
range: 0-999999

.1.3.6.1.4.1.664.5.70.2.4.1.10

adGenEthernetDslamFlowProfileActualEIR

This variable shows the actual EIR (in kbps). Policer
attributes are set to the closest possible value in
hardware based on platform speed, which means the
configured EIR may not be the same as the actual EIR.

Integer32

Constraints:
range: 0-100000

.1.3.6.1.4.1.664.5.70.2.4.1.11

adGenEthernetDslamFlowProfileActualEBS

This variable shows the actual EBS (in bytes). Policer
attributes are set to the closest possible value in
hardware based on platform speed, which means the
configured EBS may not be the same as the actual EBS.

Integer32

Constraints:
range: 0-999999

.1.3.6.1.4.1.664.5.70.2.4.1.12

adGenEthernetDslamFlowNameLookupTable

table

.1.3.6.1.4.1.664.5.70.2.5 · 1 row entry · 2 columns

Open in standard view

This read-only table allows a lookup from the flow's name and the
flow's index.

adGenEthernetDslamFlowNameLookupEntry entry .1.3.6.1.4.1.664.5.70.2.5.1

An entry in the Profile provisioning table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowNameLookupName

Column	Syntax	OID
adGenEthernetDslamFlowNameLookupName Specifies the name of the flow.	OctetString Constraints: `range: 1-32`	`.1.3.6.1.4.1.664.5.70.2.5.1.1`
adGenEthernetDslamFlowNameLookupIndex Specifies the index of the flow given the name.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.70.2.5.1.2`

adGenEthernetDslamFlowShaperTable

table

.1.3.6.1.4.1.664.5.70.2.6 · 1 row entry · 11 columns

Open in standard view

Defines egress shapers applied to ethernet interfaces.

adGenEthernetDslamFlowShaperEntry entry .1.3.6.1.4.1.664.5.70.2.6.1

A shaper indexed by ethernet interface and the set of priorities on that
ethernet interface to which it applies.

Indexes

IF-MIBifIndex adGenEthernetDslamFlowShaperInterfaceLogicalIndex adGenEthernetDslamFlowShaperPrioritySet

Column Syntax OID

adGenEthernetDslamFlowShaperInterfaceLogicalIndex

The logical interface index of the ethernet interface to which this shaper applies

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.6.1.1

adGenEthernetDslamFlowShaperPrioritySet

A bit-mask of priorities to which this shaper applies. Bit 0 indicates queue 0.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.6.1.2

adGenEthernetDslamFlowShaperRate

The peak information rate in kbps of this shaper. Note that for a very short
time the units were specified as bps. This was only implemented by a VDSL device,
and will be corrected. It was quickly realized that kbps wou…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.6.1.3

adGenEthernetDslamFlowShaperRowStatus

This object is used to create
a new row or modify or delete an
existing row in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.664.5.70.2.6.1.4

adGenEthernetDslamFlowShaperLastErrorString

Returns the reason for the last error.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.70.2.6.1.5

adGenEthernetDslamFlowShaperAlias

A user configurable alias for the Shaper. Upon creation of
the Shaper, the associated alias will default to a unique value.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.664.5.70.2.6.1.6

adGenEthernetDslamFlowShaperOperationalStatus

Provides an indication if the shaper is actually running or not. Provides notRunning if the shaper cannot start shaping, provides Running if the shaper is shaping on an interface

Enumeration

Enumerated Values:

1	shaperNotRunning
2	shaperRunning

.1.3.6.1.4.1.664.5.70.2.6.1.7

adGenEthernetDslamFlowShaperBurstSize

The burst size in bytes, specified for per-port shapers.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.6.1.8

adGenEthernetDslamFlowShaperFixedRate

The fixed rate in kbps of this shaper. This rate is guaranteed, and the
interface will generate idle frames to transmit if the rate is not met. This
means the bandwidth for fixed rates cannot be used by other sources.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.6.1.9

adGenEthernetDslamFlowShaperAssuredRate

The assured rate in kbps of this shaper. This rate is guaranteed, but
the interface will not generate idle frames if the rate is not met. This
means the bandwidth for assured rates can be used by other sources if the
…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.6.1.10

adGenEthernetDslamFlowShaperDownstreamMinRate

The downstream min-rate in kbps of this shaper.

kbpsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.6.1.11

adGenSubscriberAccessStaticIpTable

table

.1.3.6.1.4.1.664.5.70.2.7 · 1 row entry · 6 columns

Open in standard view

Defines list of subscriber static ip addresses attached on the flow.

adGenSubscriberAccessStaticIpEntry entry .1.3.6.1.4.1.664.5.70.2.7.1

It is indexed by ip address and the flow to which it is attached.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowIndex adGenSubscriberAccessStaticIpAddress

Column Syntax OID

adGenSubscriberAccessStaticIpAddress

The value of the subscriber static ip

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.664.5.70.2.7.1.1

adGenSubscriberAccessStaticIpMacAddress

The subscriber mac address that is associated with this static ip entry.

SNMPv2-TCPhysAddressr/w

Textual Convention: SNMPv2-TCPhysAddress OctetString

.1.3.6.1.4.1.664.5.70.2.7.1.2

adGenSubscriberAccessStaticIpGatewayIp

The subscriber gateway ip address that is associated with this static ip entry

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.664.5.70.2.7.1.3

adGenSubscriberAccessStaticIpGatewayMac

The subscriber gateway mac address that is associated with this static ip entry.

SNMPv2-TCPhysAddressr/w

Textual Convention: SNMPv2-TCPhysAddress OctetString

.1.3.6.1.4.1.664.5.70.2.7.1.4

adGenSubscriberAccessStaticIpLastErrorString

Returns the reason for the last error.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.70.2.7.1.5

adGenSubscriberAccessStaticIpRowStatus

This object is used to create
a new row or modify or delete an
existing row in this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.664.5.70.2.7.1.6

adGenEthernetDslamFlowProfilesIndexNextTable

table

.1.3.6.1.4.1.664.5.70.2.8 · 1 row entry · 1 columns

Open in standard view

This table is a read only table that has one row per slot. It returns the
next available policer index to be used as the index for the
Policer table.

adGenEthernetDslamFlowProfilesIndexNextEntry entry .1.3.6.1.4.1.664.5.70.2.8.1

An entry in the adGenEthernetDslamFlowProfilesIndexNextTable.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenEthernetDslamFlowProfilesIndexNext This variable returns the next available Policer Index.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.70.2.8.1.1`

adGenEthernetDslamFlowProfilesLookupTable

table

.1.3.6.1.4.1.664.5.70.2.9 · 1 row entry · 2 columns

Open in standard view

This read-only table allows a lookup from the policer's name and the
policer's index.

adGenEthernetDslamFlowProfilesLookupEntry entry .1.3.6.1.4.1.664.5.70.2.9.1

An entry in the policer lookup table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowProfileLookupAlias

Column	Syntax	OID
adGenEthernetDslamFlowProfileLookupAlias Specifies the name of the policer.	OctetString Constraints: `range: 1-32`	`.1.3.6.1.4.1.664.5.70.2.9.1.1`
adGenEthernetDslamFlowProfileLookupIndex Specifies the index of the policer given the name.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.70.2.9.1.2`

adGenEthernetDslamFlowShaperLookupTable

table

.1.3.6.1.4.1.664.5.70.2.10 · 1 row entry · 4 columns

Open in standard view

This read-only table allows a lookup from the shaper's name and the
shaper's index.

adGenEthernetDslamFlowShaperLookupEntry entry .1.3.6.1.4.1.664.5.70.2.10.1

An entry in the shaper lookup table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowShaperLookupAlias

Column	Syntax	OID
adGenEthernetDslamFlowShaperLookupAlias Specifies the name of the shaper.	OctetString Constraints: `range: 1-32`	`.1.3.6.1.4.1.664.5.70.2.10.1.1`
adGenEthernetDslamFlowShaperLookupIfIndex Specifies the ifIndex of the shaper given the name	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.70.2.10.1.2`
adGenEthernetDslamFlowShaperLookupInterfaceLogicalIndex Specifies the logical interface index of the ethernet interface to which this shaper applies given the name	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.70.2.10.1.3`
adGenEthernetDslamFlowShaperLookupPrioritySet Given the shaper name, specifies a bit-mask of priorities to which this shaper applies. Bit 0 indicates queue 0.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.70.2.10.1.4`

adGenEthernetDslamFlowRev2Table

table

.1.3.6.1.4.1.664.5.70.2.11 · 1 row entry · 75 columns

Open in standard view

This table consists of the mapping from a user ethernet interface
into an S-Tag or S-Tag/C-Tag. This table returns all interfaces.

adGenEthernetDslamFlowRev2Entry entry .1.3.6.1.4.1.664.5.70.2.11.1

An entry in the adGenEthernetDslamFlowRev2Table. Each entry is an
entry in a list of maps that can be applied to a user
port.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowRev2Index

Column Syntax OID

adGenEthernetDslamFlowRev2Index

Index that specifies an individual
map.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.1

adGenEthernetDslamFlowRev2Name

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.664.5.70.2.11.1.2

adGenEthernetDslamFlowRev2TrafficDirection

Enumerationr/w

Enumerated Values:

1	upstream
2	downstream
3	bidirectional

.1.3.6.1.4.1.664.5.70.2.11.1.3

adGenEthernetDslamFlowRev2NetworkSTag

Specify the STag seen on network traffic.

Integer32r/w

Constraints:
range: 2-4094

.1.3.6.1.4.1.664.5.70.2.11.1.4

adGenEthernetDslamFlowRev2NetworkCTag

Integer32r/w

Constraints:
range: 2-4096

.1.3.6.1.4.1.664.5.70.2.11.1.5

adGenEthernetDslamFlowRev2CEVlan

Integer32r/w

Constraints:
range: 0-4097

.1.3.6.1.4.1.664.5.70.2.11.1.6

adGenEthernetDslamFlowRev2DownstreamForwardingMode

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.7

adGenEthernetDslamFlowRev2DownstreamPbitMethod

Enumerationr/w

Enumerated Values:

1	inherit
2	marked
3	mapped

.1.3.6.1.4.1.664.5.70.2.11.1.8

adGenEthernetDslamFlowRev2DownstreamPbitMarking

If the network Pbit mode is marked then this variable
specifies the downstream pBit.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.664.5.70.2.11.1.9

adGenEthernetDslamFlowRev2DownstreamPbitMapping

If the network Pbit mode is mapped then this variable
specifies the ingress/egress priority mapping index.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.10

adGenEthernetDslamFlowRev2NetworkIngressPbit

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.664.5.70.2.11.1.11

adGenEthernetDslamFlowRev2NetworkIngressEtherType

Specify the EtherType value that will be used to
classify NetworkIngress traffic. A value of 0x0000
indicates this filter is disabled.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.12

adGenEthernetDslamFlowRev2NetworkIngressDSCP

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.664.5.70.2.11.1.13

adGenEthernetDslamFlowRev2NetworkIngressIPProtocolID

Specify the IP Protocol ID that will be used to
classify NetworkIngress traffic. A value of 0x0000
indicates this filter is disabled.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.14

adGenEthernetDslamFlowRev2UpstreamForwardingMode

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.15

adGenEthernetDslamFlowRev2UpstreamSTagPbitMethod

Enumerationr/w

Enumerated Values:

1	inherit
2	marked
3	mapped

.1.3.6.1.4.1.664.5.70.2.11.1.16

adGenEthernetDslamFlowRev2UpstreamSTagPbitMarking

If the Customer Pbit mode is marked then this variable
specifies the upstream STag pBit.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.664.5.70.2.11.1.17

adGenEthernetDslamFlowRev2UpstreamSTagPbitMapping

If the Customer Pbit mode is mapped then this variable
specifies the ingress/egress STag priority mapping index.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.18

adGenEthernetDslamFlowRev2UpstreamCTagPbitMethod

Enumerationr/w

Enumerated Values:

1	inherit
2	marked
3	mapped

.1.3.6.1.4.1.664.5.70.2.11.1.19

adGenEthernetDslamFlowRev2UpstreamCTagPbitMarking

If the Customer Pbit mode is marked then this variable
specifies the upstream CTag pBit.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.664.5.70.2.11.1.20

adGenEthernetDslamFlowRev2UpstreamCTagPbitMapping

If the Customer Pbit mode is mapped then this variable
specifies the ingress/egress CTag priority mapping index.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.21

adGenEthernetDslamFlowRev2CustomerIngressPbit

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.664.5.70.2.11.1.22

adGenEthernetDslamFlowRev2CustomerIngressEtherType

Specify the EtherType value that will be used to
classify CustomerIngress traffic. A value of 0x0000
indicates this filter is disabled.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.23

adGenEthernetDslamFlowRev2CustomerIngressDSCP

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.664.5.70.2.11.1.24

adGenEthernetDslamFlowRev2CustomerIngressIPProtocolID

Specify the IP Protocol ID that will be used to
classify CustomerIngress traffic. A value of 0x0000
indicates this filter is disabled.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.25

adGenEthernetDslamFlowRev2CustomerIngressBroadcast

This variable specifies whether or not to
drop CustomerIngress broadcasts on this map.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.11.1.26

adGenEthernetDslamFlowRev2CustomerIngressMulticast

This variable specifies whether or not to
drop CustomerIngress multicasts on this map.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.11.1.27

adGenEthernetDslamFlowRev2CustomerIngressUnicast

This variable specifies whether or not to
drop CustomerIngress unicasts on this map.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.11.1.28

adGenEthernetDslamFlowRev2CustomerIngressPolicer

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.29

adGenEthernetDslamFlowRev2EncapsMode

Enumerationr/w

Enumerated Values:

1	ipoe
2	pppoe
3	pppoa
4	notApplicable
5	atmoe
6	pppoaVcMux
7	autoDetect
8	ethernet

.1.3.6.1.4.1.664.5.70.2.11.1.30

adGenEthernetDslamFlowRev2ManualAddrAging

Manual Address Aging in minutes for unicast MACs.

Integer32r/w

Constraints:
range: 1-1440

.1.3.6.1.4.1.664.5.70.2.11.1.31

adGenEthernetDslamFlowRev2IntermedAgent

Enable/disable Intermediate Agent if applicable; 'notApplicable' otherwise.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.11.1.32

adGenEthernetDslamFlowRev2DhcpRelay

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable
4	transparent
5	snoop

.1.3.6.1.4.1.664.5.70.2.11.1.33

adGenEthernetDslamFlowRev2Option82Insert

Enable/disable Option 82 Insertion if applicable; 'notApplicable' otherwise.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.11.1.34

adGenEthernetDslamFlowRev2LearnedIpAddrAgingMethod

Method for Learned IP Address Aging if applicable; 'notApplicable' otherwise.

Enumerationr/w

Enumerated Values:

1	lease
2	fixed
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.11.1.35

adGenEthernetDslamFlowRev2IgmpProcessing

Method for IGMP Processing if applicable; 'notApplicable' otherwise.

Enumerationr/w

Enumerated Values:

1	block
2	forward
3	snooping
4	proxy
5	notApplicable
6	transparent
7	forking

.1.3.6.1.4.1.664.5.70.2.11.1.36

adGenEthernetDslamFlowRev2IgmpVersion

IGMP Version if applicable: v3 implies v1, v2, and v3;
v2 implies v1 and v2; v1 is v1 only; 'notApplicable' otherwise.

Enumerationr/w

Enumerated Values:

1	v1
2	v2
3	v3
4	notApplicable

.1.3.6.1.4.1.664.5.70.2.11.1.37

adGenEthernetDslamFlowRev2LastMemberQueryInterval

Last Member Query Interval in milliseconds.
This is the amount of time between Queries. Low
value results in faster detection of missed leaves.

Integer32r/w

Constraints:
range: 100-65535

.1.3.6.1.4.1.664.5.70.2.11.1.38

adGenEthernetDslamFlowRev2LastMemberQueryCount

Last Member Query Count. This is the number of
queries before declaring no membership of a group
(channel).

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.664.5.70.2.11.1.39

adGenEthernetDslamFlowRev2ImmediateLeave

Enable/disable Immediate Leave if applicable; 'notApplicable' otherwise.
Disable is the equivalent of setting Last Member Query Count to 0.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.11.1.40

adGenEthernetDslamFlowRev2MaxAllowedMcastGroups

Maximum Allowed Non-Guaranteed Multicast Groups. This value is only
considered if multicast groups are enabled.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.41

adGenEthernetDslamFlowRev2DhcpPPPoERemoteId

Enable/disable Remote ID insertion into DHCPv4 Option 82 or
DHCPv6 relay agent in option 37 or PPPoE Vendor Specific tag
if applicable.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.11.1.42

adGenEthernetDslamFlowRev2DhcpPPPoELoopCharacteristics

Enable/disable loop characteristics insertion into DHCPv4 Option 82 or
DHCPv6 relay agent option 17 (vendor specific) loop characteristics or
PPPoE Vendor Specific tag if applicable.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable

.1.3.6.1.4.1.664.5.70.2.11.1.43

adGenEthernetDslamFlowRev2DhcpPPPoECircuitIdFormat

OctetStringr/w

Constraints:
range: 0-63

.1.3.6.1.4.1.664.5.70.2.11.1.44

adGenEthernetDslamFlowRev2PPPoASessionTimeout

Used to set the PPPoA Session timeout when the
mapping is provisioned for PPPoA encapsulation.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.45

adGenEthernetDslamFlowRev2InterfaceIfIndex

Specifies the IfIndex of the Interface this mapping is tied to.
If the value is 0 then this map is not applied to a Interface. This
value must be nonzero before the flow can be activated.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.46

adGenEthernetDslamFlowRev2InterfaceLogicalIndex

Specifies the logical indes within the ifIndex of the ethernet interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.47

adGenEthernetDslamFlowRev2LastErrorString

Returns the reason for the last error.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.70.2.11.1.48

adGenEthernetDslamFlowRev2RowStatus

This object is used to create
a new row or modify or delete an
existing map in this table. A row cannot be set to active
until the ethernet interface ifIndex is set.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.664.5.70.2.11.1.49

adGenEthernetDslamFlowRev2NetworkIngressPolicer

Indicate which policer to on network ingress traffic. A value of 0 means no
policer is used on network ingress traffic. A non-zero value represents
a row from the adGenEthernetDslamFlowRev2ProfilesTable.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.50

adGenEthernetDslamFlowRev2UpstreamDiscard

Indicate that any packets matching the upstream criteria will be discarded.

Enumerationr/w

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.664.5.70.2.11.1.51

adGenEthernetDslamFlowRev2MaxAllowedMulticastBandwidth

Specify the maximum downstream bandwidth(kbps) available for this flow.
This value is only considered if multicast bandwidth is enabled.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.53

adGenEthernetDslamFlowRev2MaxAllowedMulticastBandwidthEnable

When enabled joins for multicast streams by the subscriber are checked to make
sure that the maximum multicast bandwidth will not be exceeded by the join.

Enumerationr/w

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.664.5.70.2.11.1.54

adGenEthernetDslamFlowRev2ProfileName

This object is provided so that the user can describe a particular flow by any
means desired. This is not related to policers in the adGenEthernetDslamFlowRev2ProfilesTable.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.664.5.70.2.11.1.55

adGenEthernetDslamFlowRev2MaxAllowedMcastGroupsEnable

When enabled joins for multicast streams by the subscriber are checked to make
sure that the maximum number of non-guarenteed multicast groups will not be
exceeded by the join.

Enumerationr/w

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.664.5.70.2.11.1.56

adGenEthernetDslamFlowRev2NetworkIngressDSCPList

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.70.2.11.1.57

adGenEthernetDslamFlowRev2CustomerIngressDSCPList

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.70.2.11.1.58

adGenEthernetDslamFlowRev2IgmpRouterIP

The source IP address that the DSLAM places in IGMP messages destined
for the subscriber. This value only applies when IGMP is in proxy mode.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.664.5.70.2.11.1.59

adGenEthernetDslamFlowRev2ActivationStatus

Provides an indication of whether the flow is actually activated.
If adGenEthernetDslamFlowRev2RowStatus is not active, this object will
return notActivated. When rowStatus is successfully set to active,
the flow begin…

Enumeration

Enumerated Values:

1	notActivated
2	inProgress
3	active
4	error

.1.3.6.1.4.1.664.5.70.2.11.1.60

adGenEthernetDslamFlowRev2ARPProcessing

Set the ARP processing mode.

Enumerationr/w

Enumerated Values:

1	block
2	proxy
3	transparent

.1.3.6.1.4.1.664.5.70.2.11.1.61

adGenEthernetDslamFlowRev2PPPoEProcessing

Set the PPPoE processing mode.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	notApplicable
4	transparent

.1.3.6.1.4.1.664.5.70.2.11.1.62

adGenEthernetDslamFlowRev2SubscriberIpRowCreateError

Returns the reason for the last row create error
on Subscriber Access Static IP Table.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.70.2.11.1.63

adGenEthernetDslamFlowRev2DhcpPPPoEVendorNumber

Used to provision the IANA Enterprise Number.
This Number is returned by the PPPoE intermediate agent and
DHCPv4 relay agent in sub option 9.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.664.5.70.2.11.1.64

adGenEthernetDslamFlowRev2DhcpPPPoEVendorIdFormat

OctetStringr/w

Constraints:
range: 0-63

.1.3.6.1.4.1.664.5.70.2.11.1.65

adGenEthernetDslamFlowRev2EvcName

OctetStringr/w

Constraints:
range: 1-50

.1.3.6.1.4.1.664.5.70.2.11.1.66

adGenEthernetDslamFlowRev2EvcRoot

Enumerationr/w

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.664.5.70.2.11.1.67

adGenEthernetDslamFlowRev2Dhcpv6Mode

Set the DHCPv6 processing mode:

Authenticate(1)- Use DHCPv6 for subscriber authentication
Block(2)- Discard DHCPv6
Transparent(3)- Ignore DHCPv6
Snoop(4)- Process DHCPv6 without performing authentication
…

Enumerationr/w

Enumerated Values:

1	authenticate
2	block
3	transparent
4	snoop
5	sameAsDhcpv4

.1.3.6.1.4.1.664.5.70.2.11.1.68

adGenEthernetDslamFlowRev2Dhcpv6RelayAgent

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	sameAsDhcpv4

.1.3.6.1.4.1.664.5.70.2.11.1.69

adGenEthernetDslamFlowRev2Dhcpv6RelayAgentTrusted

Enable/disable DHCPv6 relay agent trusted mode.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.664.5.70.2.11.1.70

adGenEthernetDslamFlowRev2DhcpPPPoERemoteIdFormat

OctetStringr/w

Constraints:
range: 0-63

.1.3.6.1.4.1.664.5.70.2.11.1.71

adGenEthernetDslamFlowRev2DownstreamQosMapProfile

OctetStringr/w

Constraints:
range: 1-80

.1.3.6.1.4.1.664.5.70.2.11.1.72

adGenEthernetDslamFlowRev2Dhcpv6CurrMode

Enumeration

Enumerated Values:

1	authenticate
2	block
3	transparent
4	snoop

.1.3.6.1.4.1.664.5.70.2.11.1.73

adGenEthernetDslamFlowRev2MatchSourceMacList

Contains a list of source MAC addresses and mask on which to match
in the following format:

Byte number(s) Description
1 Number of match source MAC address entries (N, 0 to M,
…

OctetStringr/w

.1.3.6.1.4.1.664.5.70.2.11.1.74

adGenEthernetDslamFlowRev2MatchSourceMacLastErrorString

Returns the reason for the last error when setting adGenEthernetDslamFlowMatchSourceMacList or
adGenEthernetDslamFlowRev2MatchSourceLastErrorString.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.664.5.70.2.11.1.75

adGenEthernetDslamFlowRev2MatchNonIp

Enables/disables matching non-IP customer ingress traffic.
True - enables match non-IP.
False - disables match non-IP.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.664.5.70.2.11.1.76

adGenEthernetDslamFlowRev2NameLookupTable

table

.1.3.6.1.4.1.664.5.70.2.12 · 1 row entry · 2 columns

Open in standard view

This read-only table allows a lookup from the flow's name and the
flow's index.

adGenEthernetDslamFlowRev2NameLookupEntry entry .1.3.6.1.4.1.664.5.70.2.12.1

An entry in the Profile provisioning table.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex adGenEthernetDslamFlowRev2NameLookupName

Column	Syntax	OID
adGenEthernetDslamFlowRev2NameLookupName Specifies the name of the flow.	OctetString Constraints: `range: 1-32`	`.1.3.6.1.4.1.664.5.70.2.12.1.1`
adGenEthernetDslamFlowRev2NameLookupIndex Specifies the index of the flow given the name.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.70.2.12.1.2`

adGenEthernetDslamFlowRev2IndexNextTable

table

.1.3.6.1.4.1.664.5.70.2.13 · 1 row entry · 1 columns

Open in standard view

This table is a read only table that has one row per slot. It returns the
next available ethernet dslam flow index to be uses as the index for the
EthernetDslamFlow table.

adGenEthernetDslamFlowRev2IndexNextEntry entry .1.3.6.1.4.1.664.5.70.2.13.1

An entry in the adGenEthernetDslamFlowRev2IndexNextTable.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenEthernetDslamFlowRev2IndexNext This variable returns the next available Ethernet Flow Index.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.70.2.13.1.1`

adGenEthernetDslamFlowQueueTable

table

.1.3.6.1.4.1.664.5.70.2.14 · 1 row entry · 2 columns

Open in standard view

This table is a read only table that has one row per slot. It returns the
queue information for a slot.

adGenEthernetDslamFlowQueueTableEntry entry .1.3.6.1.4.1.664.5.70.2.14.1

An entry in the adGenEthernetDslamFlowQueueTable.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column Syntax OID

adGenEthernetDslamFlowHonorsSystemPbitCosMap

Indicates whether a slot is currently honoring the system's P-bit to CoS mapping.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.664.5.70.2.14.1.1

adGenEthernetDslamFlowShaperQueuePriorityOrder

Indicates for SNMP whether adGenEthernetDslamFlowShaperPrioritySet
is represented with the left-most bit representing the highest priority queue
or the right-most bit representing the highest priority queue.
Example: r…

Enumeration

Enumerated Values:

1	rightMostHighest
2	leftMostHighest

.1.3.6.1.4.1.664.5.70.2.14.1.2

adGenEthernetDslamFlowScalarTable

table

.1.3.6.1.4.1.664.5.70.2.16 · 1 row entry · 1 columns

Open in standard view

This table is a read only table that has one row per slot. It returns the
scalar information for a slot.

adGenEthernetDslamFlowScalarTableEntry entry .1.3.6.1.4.1.664.5.70.2.16.1

An entry in the adGenEthernetDslamFlowScalarTable.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column	Syntax	OID
adGenEthernetFlowMatchSourceMacMaxAddresses Indicates the maximum number of match source MAC addresses allowed.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.5.70.2.16.1.1`

adGenEthernetDslamFlowLoggingTable

table

.1.3.6.1.4.1.664.5.70.2.17 · 1 row entry · 1 columns

Open in standard view

This table is for enabling/disabling DHCP and PPPoE debug from event log and has one row per slot.

adGenEthernetDslamFlowLoggingEntry entry .1.3.6.1.4.1.664.5.70.2.17.1

An entry in the adGenEthernetDslamFlowLoggingTable.

Indexes

ADTRAN-GENSLOT-MIBadGenSlotInfoIndex

Column Syntax OID

adGenEthernetDslamFlowDhcpPppoeEventDebug

Enables/disables extraneous DHCP and PPPoE debug from event log.
1 = Enabled
2 = Disabled

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.664.5.70.2.17.1.1