adGenEthernetInterfaceType

ADTRAN-ETHERNET-DSLAM-FLOW-MIB · .1.3.6.1.4.1.664.5.70.2.1.1.5

Object

column ADTRAN-SHARED-CND-SYSTEM-TC-MIBGenSystemInterfaceType

Describes the interface type of ethernet interface

Type Values

`1`	unknown
`2`	ds1
`3`	dsx1
`4`	e1
`5`	dsxE1
`6`	gigabitEthernet
`7`	ds3
`8`	portChannel
`9`	tenGigabitEthernet
`10`	erps
`11`	shdsl
`12`	adsl
`13`	vdsl
`14`	efmGroup
`15`	efmLink
`16`	efmPort
`17`	lagGroup
`18`	pppGroup
`19`	imaGroup
`20`	imaLink
`21`	atm
`22`	fxs
`23`	hdsl2
`24`	hdsl4
`25`	adsl2
`26`	vdsl2
`27`	ethernet
`28`	fast
`29`	interleave
`30`	hdsl
`31`	gpon
`32`	ipHost
`33`	frpvc
`34`	sonet
`35`	otn
`36`	wan
`37`	defaultEthernet
`38`	genericBridge
`39`	fibreChannel
`40`	otnTenGigabitEthernet
`41`	hundredGigabitEthernet
`42`	otnHundredGigabitEthernet
`43`	xgigabitEthernet

Sibling Objects

Object	Type	Syntax	OID
adGenEthernetInterfaceLogicalIndex An implementation specific index defining a Logical Interface on a particular physical ifIndex. It is the same number as the subinterface in the CLI. For example, this index would…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.664.5.70.2.1.1.1`
adGenEthernetInterfaceMaxMACAddresses Specify the maximum number of MAC addresses for this Interface.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.664.5.70.2.1.1.2`
adGenEthernetInterfaceFlowList A string of indices of flows applied to this Interface.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.664.5.70.2.1.1.3`
adGenEthernetInterfaceSourceAuthentication If this is enabled then only authenticated flows will pass traffic for this Ethernet Interface.	column	Enumeration	`.1.3.6.1.4.1.664.5.70.2.1.1.4`
adGenEthernetInterfaceTypeSpecific This item returns a vector of interface type specific data byte# \| Descr ATM - 0 \| Upper 4 bits = 0, Lower 4 bits = Upper 4 bits of VPI 1 \| Lower 8 bits of VPI 2 \| Upp…	column	OctetString	`.1.3.6.1.4.1.664.5.70.2.1.1.6`