adGenEthernetDslamFlowNetworkIngressPbit
ADTRAN-ETHERNET-DSLAM-FLOW-MIB ·
.1.3.6.1.4.1.664.5.70.2.2.1.11
Object
column
r/w
Integer32
This option is a bitmask used to specify a list of allowable P-bit values of the S-Tag ingressing from the network. A value of 255 indicates that this value is not used to classify network ingress traffic.
Context
- MIB
- ADTRAN-ETHERNET-DSLAM-FLOW-MIB
- OID
.1.3.6.1.4.1.664.5.70.2.2.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adGenEthernetDslamFlowEntry
- Table
- adGenEthernetDslamFlowTable
- Siblings
- 76
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenEthernetDslamFlowIndex Index that specifies an individual
map. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.1 |
| adGenEthernetDslamFlowDownstreamPbitMapping If the network Pbit mode is mapped then this variable
specifies the ingress/egress priority mapping index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.10 |
| adGenEthernetDslamFlowNetworkIngressEtherType Specify the EtherType value that will be used to
classify NetworkIngress traffic. A value of 0x0000
indicates this filter is disabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.12 |
| adGenEthernetDslamFlowNetworkIngressDSCP Specify a single DSCP value that will be used to classify
NetworkIngress traffic. A value of 64 indicates this filter
is disabled. If multiple DSCP values should be specified,
us… | column | Integer32 | .1.3.6.1.4.1.664.5.70.2.2.1.13 |
| adGenEthernetDslamFlowNetworkIngressIPProtocolID Specify the IP Protocol ID that will be used to
classify NetworkIngress traffic. A value of 0x0000
indicates this filter is disabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.14 |
| adGenEthernetDslamFlowUpstreamForwardingMode Specify how ethernet frames on this flow are forwarded through the switch. This
value is bitmasked so that forwarding modes can be combined.
src (0x1) - Use the ethernet interface… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.15 |
| adGenEthernetDslamFlowUpstreamSTagPbitMethod Specify the PBit mapping mode in from the
Customer to Network STag.
Inherit - upstream STags should egress
with the priority from the customer.
Marked - upstream STags should a… | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.16 |
| adGenEthernetDslamFlowUpstreamSTagPbitMarking If the Customer Pbit mode is marked then this variable
specifies the upstream STag pBit. | column | Integer32 | .1.3.6.1.4.1.664.5.70.2.2.1.17 |
| adGenEthernetDslamFlowUpstreamSTagPbitMapping If the Customer Pbit mode is mapped then this variable
specifies the ingress/egress STag priority mapping index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.18 |
| adGenEthernetDslamFlowUpstreamCTagPbitMethod Specify the CTag PBit mapping mode in from the
Customer to Network.
Inherit - upstream traffic should egress
with the priority from the customer.
Marked - upstream traffic shou… | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.19 |
| adGenEthernetDslamFlowName This object is provided so that the user can identify
the ethernet flow uniquely. The profile will be stored in the EMS by
name and applied to the user-specified flows.
This profi… | column | OctetString | .1.3.6.1.4.1.664.5.70.2.2.1.2 |
| adGenEthernetDslamFlowUpstreamCTagPbitMarking If the Customer Pbit mode is marked then this variable
specifies the upstream CTag pBit. | column | Integer32 | .1.3.6.1.4.1.664.5.70.2.2.1.20 |
| adGenEthernetDslamFlowUpstreamCTagPbitMapping If the Customer Pbit mode is mapped then this variable
specifies the ingress/egress CTag priority mapping index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.21 |
| adGenEthernetDslamFlowCustomerIngressPbit This option is a bitmask used to specify a list of allowable P-bit values
of the CEVlan ingressing from the customer. A value of
255 indicates that this value is not used to class… | column | Integer32 | .1.3.6.1.4.1.664.5.70.2.2.1.22 |
| adGenEthernetDslamFlowCustomerIngressEtherType Specify the EtherType value that will be used to
classify CustomerIngress traffic. A value of 0x0000
indicates this filter is disabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.23 |
| adGenEthernetDslamFlowCustomerIngressDSCP Specify a single DSCP value that will be used to classify
CustomerIngress traffic. A value of 64 indicates this filter
is disabled. If multiple DSCP values should be specified,
u… | column | Integer32 | .1.3.6.1.4.1.664.5.70.2.2.1.24 |
| adGenEthernetDslamFlowCustomerIngressIPProtocolID Specify the IP Protocol ID that will be used to
classify CustomerIngress traffic. A value of 0x0000
indicates this filter is disabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.25 |
| adGenEthernetDslamFlowCustomerIngressBroadcast This variable specifies whether or not to
drop CustomerIngress broadcasts on this map. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.26 |
| adGenEthernetDslamFlowCustomerIngressMulticast This variable specifies whether or not to
drop CustomerIngress multicasts on this map. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.27 |
| adGenEthernetDslamFlowCustomerIngressUnicast This variable specifies whether or not to
drop CustomerIngress unicasts on this map. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.28 |
| adGenEthernetDslamFlowCustomerIngressPolicer Indicate which policer to on customer ingress traffic. A value of 0 means no
policer is used on customer ingress traffic. A non-zero value represents
a row from the adGenEthernet… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.29 |
| adGenEthernetDslamFlowTrafficDirection Specify the traffic direction to which this
map applies.
Upstream:
Customer C-Tag, Pbit, Ethertype,
DSCP, and IP Protocol are used to classify traffic
upstream.
The Up… | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.3 |
| adGenEthernetDslamFlowEncapsMode Encapsulation mode/type if applicable; 'notApplicable' otherwise. IPoE and PPPoE
specify a particular protocol over ethernet. 'Ethernet' specifies that any protocol over
ethernet … | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.30 |
| adGenEthernetDslamFlowManualAddrAging Manual Address Aging in minutes for unicast MACs. | column | Integer32 | .1.3.6.1.4.1.664.5.70.2.2.1.31 |
| adGenEthernetDslamFlowIntermedAgent Enable/disable Intermediate Agent if applicable; 'notApplicable' otherwise. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.32 |
| adGenEthernetDslamFlowDhcpRelay Set the DHCPv4 processing mode:
Enabled(1)- Use DHCPv4 for subscriber authentication
Disabled(2)- Discard DHCPv4
Not Applicable(3)- Unused
Transparent(4)- Ignore DH… | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.33 |
| adGenEthernetDslamFlowOption82Insert Enable/disable Option 82 Insertion if applicable; 'notApplicable' otherwise. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.34 |
| adGenEthernetDslamFlowLearnedIpAddrAgingMethod Method for Learned IP Address Aging if applicable; 'notApplicable' otherwise. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.35 |
| adGenEthernetDslamFlowIgmpProcessing Method for IGMP Processing if applicable; 'notApplicable' otherwise. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.36 |
| adGenEthernetDslamFlowIgmpVersion IGMP Version if applicable: v3 implies v1, v2, and v3;
v2 implies v1 and v2; v1 is v1 only; 'notApplicable' otherwise. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.37 |
| adGenEthernetDslamFlowLastMemberQueryInterval Last Member Query Interval in milliseconds.
This is the amount of time between Queries. Low
value results in faster detection of missed leaves. | column | Integer32 | .1.3.6.1.4.1.664.5.70.2.2.1.38 |
| adGenEthernetDslamFlowLastMemberQueryCount Last Member Query Count. This is the number of
queries before declaring no membership of a group
(channel). | column | Integer32 | .1.3.6.1.4.1.664.5.70.2.2.1.39 |
| adGenEthernetDslamFlowNetworkSTag Specify the STag seen on network traffic. | column | Integer32 | .1.3.6.1.4.1.664.5.70.2.2.1.4 |
| adGenEthernetDslamFlowImmediateLeave Enable/disable Immediate Leave if applicable; 'notApplicable' otherwise.
Disable is the equivalent of setting Last Member Query Count to 0. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.40 |
| adGenEthernetDslamFlowMaxAllowedMcastGroups Maximum Allowed Non-Guaranteed Multicast Groups. This value is only
considered if multicast groups are enabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.41 |
| adGenEthernetDslamFlowDhcpPPPoERemoteId Enable/disable Remote ID insertion into DHCPv4 Option 82 or
DHCPv6 relay agent in option 37 or PPPoE Vendor Specific tag
if applicable. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.42 |
| adGenEthernetDslamFlowDhcpPPPoELoopCharacteristics Enable/disable loop characteristics insertion into DHCPv4 Option 82 or
DHCPv6 relay agent option 17 (vendor specific) loop characteristics or
PPPoE Vendor Specific tag if applicab… | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.43 |
| adGenEthernetDslamFlowDhcpPPPoECircuitIdFormat Used to provision the format of the circuit ID string. This
string is returned by the PPPoE intermediate agent and
DHCP relay agent in v4 sub option 1 or in v6 option 18.
TR-101 s… | column | OctetString | .1.3.6.1.4.1.664.5.70.2.2.1.44 |
| adGenEthernetDslamFlowPPPoASessionTimeout Used to set the PPPoA Session timeout when the
mapping is provisioned for PPPoA encapsulation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.45 |
| adGenEthernetDslamFlowInterfaceIfIndex Specifies the IfIndex of the Interface this mapping is tied to.
If the value is 0 then this map is not applied to a Interface. This
value must be nonzero before the flow can be ac… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.46 |
| adGenEthernetDslamFlowInterfaceLogicalIndex Specifies the logical indes within the ifIndex of the ethernet interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.47 |
| adGenEthernetDslamFlowLastErrorString Returns the reason for the last error. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.70.2.2.1.48 |
| adGenEthernetDslamFlowRowStatus This object is used to create
a new row or modify or delete an
existing map in this table. A row cannot be set to active
until the ethernet interface ifIndex is set. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.664.5.70.2.2.1.49 |
| adGenEthernetDslamFlowNetworkCTag Specify the CTag seen on network ingress/egress traffic. A value of 4095
indicates that no Network CTag is used. A value of 4096 indicates that
that the Network CTag should match… | column | Integer32 | .1.3.6.1.4.1.664.5.70.2.2.1.5 |
| adGenEthernetDslamFlowNetworkIngressPolicer Indicate which policer to on network ingress traffic. A value of 0 means no
policer is used on network ingress traffic. A non-zero value represents
a row from the adGenEthernetDs… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.50 |
| adGenEthernetDslamFlowUpstreamDiscard Indicate that any packets matching the upstream criteria will be discarded. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.51 |
| adGenEthernetDslamFlowMaxAllowedMulticastBandwidth Specify the maximum downstream bandwidth(kbps) available for this flow.
This value is only considered if multicast bandwidth is enabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.53 |
| adGenEthernetDslamFlowMaxAllowedMulticastBandwidthEnable When enabled joins for multicast streams by the subscriber are checked to make
sure that the maximum multicast bandwidth will not be exceeded by the join. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.54 |
| adGenEthernetDslamFlowProfileName This object is provided so that the user can describe a particular flow by any
means desired. This is not related to policers in the adGenEthernetDslamFlowProfilesTable. | column | OctetString | .1.3.6.1.4.1.664.5.70.2.2.1.55 |
| adGenEthernetDslamFlowMaxAllowedMcastGroupsEnable When enabled joins for multicast streams by the subscriber are checked to make
sure that the maximum number of non-guarenteed multicast groups will not be
exceeded by the join. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.56 |
| adGenEthernetDslamFlowNetworkIngressDSCPList This object is a string used to specify the DSCP values that will
be used to classify NetworkIngress traffic. The DSCP values can
be specified using both list and range notation.… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.70.2.2.1.57 |
| adGenEthernetDslamFlowCustomerIngressDSCPList This object is a string used to specify the DSCP values that will
be used to classify CustomerIngress traffic. The DSCP values can
be specified using both list and range notation… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.70.2.2.1.58 |
| adGenEthernetDslamFlowIgmpRouterIP The source IP address that the DSLAM places in IGMP messages destined
for the subscriber. This value only applies when IGMP is in proxy mode. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.664.5.70.2.2.1.59 |
| adGenEthernetDslamFlowCEVlan Specify the CEVlan seen on customer ingress/egress traffic. A value of 4095
indicates that no CEVlan is present. A value of 4097 indicates that customer traffic can
be tagged or … | column | Integer32 | .1.3.6.1.4.1.664.5.70.2.2.1.6 |
| adGenEthernetDslamFlowActivationStatus Provides an indication of whether the flow is actually activated.
If adGenEthernetDslamFlowRowStatus is not active, this object will
return notActivated. When rowStatus is succes… | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.60 |
| adGenEthernetDslamFlowARPProcessing Set the ARP processing mode. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.61 |
| adGenEthernetDslamFlowPPPoEProcessing Set the PPPoE processing mode. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.62 |
| adGenEthernetDslamFlowSubscriberIpRowCreateError Returns the reason for the last row create error
on Subscriber Access Static IP Table. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.70.2.2.1.63 |
| adGenEthernetDslamFlowDhcpPPPoEVendorNumber Used to provision the IANA Enterprise Number.
This Number is returned by the PPPoE intermediate agent and
DHCPv4 relay agent in sub option 9. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.64 |
| adGenEthernetDslamFlowDhcpPPPoEVendorIdFormat Used to provision the format of the vendor ID string. This
string is returned by the PPPoE intermediate agent and
DHCPv4 relay agent in sub option 9. TR-101 states that the
format… | column | OctetString | .1.3.6.1.4.1.664.5.70.2.2.1.65 |
| adGenEthernetDslamFlowEvcName Set the name of the EVC that this flow is connected to.
When this object is set, other objects that relate to
EVC parameters (e.g. network S-tag, MAC switching, etc.)
will be chan… | column | OctetString | .1.3.6.1.4.1.664.5.70.2.2.1.66 |
| adGenEthernetDslamFlowEvcRoot Indicates whether the mapped interface is connected to the
EVC as a root or a leaf. Root interfaces may forward to
leaves and other roots; leaf interfaces may only forard to
root… | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.67 |
| adGenEthernetDslamFlowDhcpv6Mode Set the DHCPv6 processing mode:
authenticate(1)- Use DHCPv6 for subscriber authentication
block(2)- Discard DHCPv6
transparent(3)- Ignore DHCPv6
snoop(4)- Process D… | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.68 |
| adGenEthernetDslamFlowDhcpv6RelayAgent Set the DHCPv6 Relay Agent Mode:
enabled(1) - enable the relay agent
disabled(2) - disable the relay agent
sameAsDhcpv4(3) - use the same mode on DHCPv6 Relay Agent as what is pro… | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.69 |
| adGenEthernetDslamFlowDownstreamForwardingMode Specify how ethernet frames on this flow are forwarded through the switch. This
value is bitmasked so that forwarding modes can be combined.
src (0x1) - Use the network port as th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.70.2.2.1.7 |
| adGenEthernetDslamFlowDhcpv6RelayAgentTrusted Enable/disable DHCPv6 relay agent trusted mode. | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.70 |
| adGenEthernetDslamFlowDhcpPPPoERemoteIdFormat Used to provision the format of the remote ID string. This
string is returned by the DHCPv4 relay agent in option 82
or DHCPv6 relay agent in option 37 or in PPPoE Vendor Specific… | column | OctetString | .1.3.6.1.4.1.664.5.70.2.2.1.71 |
| adGenEthernetDslamFlowDownstreamQosMapProfile The attached QoS Map Profile from the adGenQosMapProfileProvisioningTable
used to classify downstream traffic into egress queues. An empty string
signifies that the default syste… | column | OctetString | .1.3.6.1.4.1.664.5.70.2.2.1.72 |
| adGenEthernetDslamFlowUpstreamChannel This OID specifies the upstream channel connected to this evc-map.
Setting the channel to 0 selects the system default channel.
When the evc-map is connected to an UNI interface t… | column | Integer32 | .1.3.6.1.4.1.664.5.70.2.2.1.73 |
| adGenEthernetDslamFlowDhcpv6CurrMode View the current DHCPv6 processing mode:
Authenticate(1)- Use DHCPv6 for subscriber authentication
Block(2)- Discard DHCPv6
Transparent(3)- Ignore DHCPv6
Snoop(4)- … | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.74 |
| adGenEthernetDslamFlowDhcpPPPoEVendorIdInsert Enable/disable Vendor ID information insertion into DHCPv4 Option 82
or DHCPv6 relay agent. Enabling this feature will insert the
adGenEthernetDslamFlowDhcpPPPoEVendorNumber and
a… | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.75 |
| adGenEthernetDslamFlowMatchSourceMacList Contains a list of source MAC addresses and mask on which to match
in the following format:
Byte number(s) Description
1 Number of match source MAC ad… | column | OctetString | .1.3.6.1.4.1.664.5.70.2.2.1.76 |
| adGenEthernetDslamFlowMatchSourceMacLastErrorString Returns the reason for the last error when setting adGenEthernetDslamFlowMatchSourceMacList or
adGenEthernetDslamFlowRev2MatchSourceLastErrorString. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.70.2.2.1.77 |
| adGenEthernetDslamFlowMatchNonIp Enables/disables matching non-IP customer ingress traffic.
True - enables match non-IP.
False - disables match non-IP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.70.2.2.1.78 |
| adGenEthernetDslamFlowDownstreamPbitMethod Specify the PBit mapping mode in from the
network to customer.
Inherit - downstream traffic should egress
the Interface with the priority from the
network.
Marked - downstre… | column | Enumeration | .1.3.6.1.4.1.664.5.70.2.2.1.8 |
| adGenEthernetDslamFlowDownstreamPbitMarking If the network Pbit mode is marked then this variable
specifies the downstream pBit. | column | Integer32 | .1.3.6.1.4.1.664.5.70.2.2.1.9 |