A3Com-RIP-IPextns-r4-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

a3RipIpCtlTable

table mandatory

.1.3.6.1.4.1.43.2.8.2 · 1 row entry · 23 columns

Open in standard view

This table contains parameters that affect the
operation of RIP for IP.

a3RipIpCtlEntry entry .1.3.6.1.4.1.43.2.8.2.1

Each entry contains parameters specific to each
network port on this system.

Indexes

a3RipIpPortIndex

Column Syntax OID

a3RipIpPortIndex mandatory

This provides the port index to which the RIP-IP
parameters in this table entry apply.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.2.8.2.1.1

a3RipIpTalkCtl mandatory

If talk (1) is specified, RIP-IP sends update and
request packets on the specified port. If noTalk (2)
is specified, no updates or requests are sent over
this port.

If talk(1) is specified, 3RipIpDynNbr…

Enumerationr/w

Enumerated Values:

1	talk
2	noTalk

.1.3.6.1.4.1.43.2.8.2.1.2

a3RipIpListenCtl mandatory

If listen (1) is selected, RIP-IP receives and
processes incoming update and request packets. If
a3RipIpTalkCtl is set to noTalk (2), this system does
not send any response packets for the request
packets it receives.

Enumerationr/w

Enumerated Values:

1	listen
2	noListen

.1.3.6.1.4.1.43.2.8.2.1.3

a3RipIpTrustedNbrCtl mandatory

This object controls how the list of trusted neighbors in
a3RipIpTrustedNbrTable is to be interpreted. If this is
set to include (1), RIP-IP will accept routing packets from
the set of addresses in a3RipIpTrustedNbrTab…

Enumerationr/w

Enumerated Values:

1	include
2	exclude

.1.3.6.1.4.1.43.2.8.2.1.4

a3RipIpPoisonCtl mandatory

This parameter determines how split horizon is
performed. To achieve split horizon, RIP-IP
refrains from advertising a route to a port if
the gateway for this route can be reached on the
same port. If poison (1) is s…

Enumerationr/w

Enumerated Values:

1	poison
2	noPoison

.1.3.6.1.4.1.43.2.8.2.1.5

a3RipIpTriggerCtl mandatory

This parameter determines if RIP-IP sends trigger
update packets. Trigger update packets are
sent when a route's metric has changed. By
sending these update packets, RIP does not need to
wait for the update interval, …

Enumerationr/w

Enumerated Values:

1	trigger
2	noTrigger

.1.3.6.1.4.1.43.2.8.2.1.6

a3RipIpDefMetric mandatory

This parameter specifies whether RIP-IP advertises
the default route. The default route is the
network with internet address 0.0.0.0 and is
reported with a metric equal to the value of this
parameter. If this is set …

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.43.2.8.2.1.7

a3RipIpExtPolCtl mandatory

This parameter controls which routes learned
by the Exterior Gateway Protocol (EGP) are
reported by RIP-IP. If this is set to all (1),
all routes learned from EGP or BGP are reported, provided
those routes are allowed …

Enumerationr/w

Enumerated Values:

1	all
2	none
3	include
4	exclude

.1.3.6.1.4.1.43.2.8.2.1.8

a3RipIpIntPolCtl mandatory

This parameter determines which routes learned by
an Interior Gateway Protocol (IGP) are reported by RIP-IP.

If this is set to all (1), all routes learned from an IGP
are reported, provided those routes…

Enumerationr/w

Enumerated Values:

1	all
2	none
3	include
4	exclude

.1.3.6.1.4.1.43.2.8.2.1.9

a3RipIpNetPolCtl mandatory

This parameter determines which routes are reported by
RIP-IP. The policies defined by this object and
a3RipIpNetPolTable overrides the policies defined in
a3RipIpIntPolCtl/Table, a3RipIpExtPolCtl/Table, and
a3RipIpS…

Enumerationr/w

Enumerated Values:

1	all
2	none
3	include
4	exclude

.1.3.6.1.4.1.43.2.8.2.1.10

a3RipIpRcvPolCtl mandatory

This parameter is used to filter routing updates
from trusted neighbors. It allows control over
which RIP routes are received and stored in the
routing table.

If this is set to all (1), all routes rep…

Enumerationr/w

Enumerated Values:

1	all
2	none
3	include
4	exclude

.1.3.6.1.4.1.43.2.8.2.1.11

a3RipIpStaPolCtl mandatory

This parameter is used to filter the reporting
of static routes. It allows control over
which static RIP routes are reported.

If this is set to all (1), all static routes
are reported, provided those ro…

Enumerationr/w

Enumerated Values:

1	all
2	none
3	include
4	exclude

.1.3.6.1.4.1.43.2.8.2.1.12

a3RipIpUnnAdvCtl mandatory

This parameter specifies which routes are reported
by RIP updates sent over an unnumbered link.
If this object is set to subnetAdvUnn (1), RIP explicitly
reports each subnetted route the system knows about.
If this ob…

Enumerationr/w

Enumerated Values:

1	subnetAdvUnn
2	netAdvUnn

.1.3.6.1.4.1.43.2.8.2.1.13

a3RipIpBcastCtl mandatory

This object specifies the destination IP address
to which RIP updates are sent over this port. If
this object is set to subnetBcast(1), the RIP
advertisement is sent using a directed broadcast
IP address as its destina…

Enumerationr/w

Enumerated Values:

1	subnetBcast
2	all1sBcast

.1.3.6.1.4.1.43.2.8.2.1.14

a3RipIpExtPolAllMet mandatory

When a3RipIpExtPolCtl is set to all, this object specifies
the metric used in RIP updates of routes learned via EGP or BGP.
If this object is set to zero, the metric is calculated from
the metric learned from EGP or BG…

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.43.2.8.2.1.15

a3RipIpIntPolAllMet mandatory

When a3RipIpIntPolCtl is set to all, this object specifies
the metric used in RIP updates of routes learned via OSPF or IISIS.
If this object is set to zero, the metric is calculated from
the metric learned from OSPF o…

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.43.2.8.2.1.16

a3RipIpNetPolAllMet mandatory

When a3RipIpNetPolCtl is set to all, this object specifies
the metric used in RIP updates of routes learned via RIP.
If this object is set to zero, the metric is taken directly from
the routing table.

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.43.2.8.2.1.17

a3RipIpRcvPolAllMet mandatory

When a3RipIpRcvPolCtl is set to all, this object specifies
the metric stored in the routing table when routing updates are
received via RIP (from trusted neighbors).

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.43.2.8.2.1.18

a3RipIpStaPolAllMet mandatory

When a3RipIpStaPolCtl is set to all, this object specifies
the metric used in RIP updates of static routes (ie, those
routes entered by a user). If this object is set to zero, the
metric is calculated from the metric…

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.43.2.8.2.1.19

a3RipIpDynNbrCtl mandatory

When a3RipIpDynNbrCtl is set to dynamicNbr over FR or X.25,
and -RIP CONTrol is set to TALK, the neighbor list is learnt
dynamically as InArp learn the IP addresses of the dlcis or
as addresses are added to the ARP ta…

Enumerationr/w

Enumerated Values:

1	dynamicNbr
2	noDynamicNbr

.1.3.6.1.4.1.43.2.8.2.1.20

a3RipIpAggregateCtl mandatory

This parameter determines if RIP-IP aggregates
subnetworks with variable-length subnet masks
into one network.

Enumerationr/w

Enumerated Values:

1	aggregate
2	noAggregate

.1.3.6.1.4.1.43.2.8.2.1.21

a3RipIpDeAggregateCtl mandatory

This parameter determines if RIP-IP de-aggregate
a network into many subnetted network.

Enumerationr/w

Enumerated Values:

1	deAggregate
2	noDeAggregate

.1.3.6.1.4.1.43.2.8.2.1.22

a3RipIpNBMAmodeCtl mandatory

This parameter determines if the underlying NBMA
network is full-mesh or non-mesh. Partial-mesh
is treated as non-mesh. When this object is set
to fullMesh(1), RIP-IP advertises routes based on
regular split-horizon. …

Enumerationr/w

Enumerated Values:

1	fullMesh
2	nonMesh

.1.3.6.1.4.1.43.2.8.2.1.23

a3RipIpExtPolTable

table mandatory

.1.3.6.1.4.1.43.2.8.3 · 1 row entry · 4 columns

Open in standard view

The table contains a list of addresses learned via EGP
that are to be included or excluded from RIP reports.

a3RipIpExtPolEntry entry .1.3.6.1.4.1.43.2.8.3.1

Each entry contains a single IP destination address.
This destination is either included or excluded from
RIP reports about routes learned via EGP. Each entry
also contains a metric to be used in the reports.

Indexes

a3RipIpExtPolPort a3RipIpExtPolAddr

Column Syntax OID

a3RipIpExtPolPort mandatory

This defines the port to which this entry applies.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.2.8.3.1.1

a3RipIpExtPolAddr mandatory

This specifies a route destination learned via EGP
that is to be included or excluded (based on a3RipIpExtPolCtl)
from RIP reports.

RFC1155-SMIIpAddress

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.43.2.8.3.1.2

a3RipIpExtPolMetric mandatory

The metric that is to be used in RIP reports of this
route. If a metric value in the range of 1 to 15 is
specified, the route, together with the specified metric,
is reported. If the metric 0 is specified, the routing…

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.43.2.8.3.1.3

a3RipIpExtPolStatus mandatory

This object is used to add and delete entries
in this table. See the notes describing
RowStatus at the beginning of this MIB.

RowStatusr/w

Textual Convention: RowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.43.2.8.3.1.4

a3RipIpIntPolTable

table mandatory

.1.3.6.1.4.1.43.2.8.4 · 1 row entry · 4 columns

Open in standard view

The table contains a list of addresses learned via an IGP
other than RIP that are to be included or excluded from 
RIP reports.

a3RipIpIntPolEntry entry .1.3.6.1.4.1.43.2.8.4.1

Each entry contains a single IP destination address.
This destination is either included or excluded from
RIP reports. Each entry also contains a metric to be
used in the reports.

Indexes

a3RipIpIntPolPort a3RipIpIntPolAddr

Column Syntax OID

a3RipIpIntPolPort mandatory

This defines the port to which this entry applies.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.2.8.4.1.1

a3RipIpIntPolAddr mandatory

This specifies a route destination learned via an IGP
that is to be included or excluded (based on a3RipIpIntPolCtl)
from RIP reports.

RFC1155-SMIIpAddress

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.43.2.8.4.1.2

a3RipIpIntPolMetric mandatory

The metric that is to be used in RIP reports of this
route. It a metric value in the range of 1 to 15 is
specified, the route, together with the specified metric,
is reported. If the metric 0 is specified, the routing…

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.43.2.8.4.1.3

a3RipIpIntPolStatus mandatory

This object is used to add and delete entries
in this table. See the notes describing
RowStatus at the beginning of this MIB.

RowStatusr/w

Textual Convention: RowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.43.2.8.4.1.4

a3RipIpNetPolTable

table mandatory

.1.3.6.1.4.1.43.2.8.5 · 1 row entry · 4 columns

Open in standard view

The table contains a list of addresses that are to 
be included or excluded from RIP reports.  Note,
Network Policy overrides Static Policy, Interior
Policy, and Exterior Policy in deciding whether a
route is to be reported.

a3RipIpNetPolEntry entry .1.3.6.1.4.1.43.2.8.5.1

Each entry contains a single IP destination address.
This destination is either included or excluded from
RIP reports. Each entry also contains a metric to be
used in the reports.

Indexes

a3RipIpNetPolPort a3RipIpNetPolAddr

Column Syntax OID

a3RipIpNetPolPort mandatory

This defines the port to which this entry applies.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.2.8.5.1.1

a3RipIpNetPolAddr mandatory

This specifies a route destination that is to be
included or excluded (based on a3RipIpNetPolCtl) from
RIP reports.

RFC1155-SMIIpAddress

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.43.2.8.5.1.2

a3RipIpNetPolMetric mandatory

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.43.2.8.5.1.3

a3RipIpNetPolStatus mandatory

This object is used to add and delete entries
in this table. See the notes describing
RowStatus at the beginning of this MIB.

RowStatusr/w

Textual Convention: RowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.43.2.8.5.1.4

a3RipIpRcvPolTable

table mandatory

.1.3.6.1.4.1.43.2.8.6 · 1 row entry · 4 columns

Open in standard view

The table contains a list of addresses learned via trusted 
neighbors that are to be received and stored in the routing
table.

a3RipIpRcvPolEntry entry .1.3.6.1.4.1.43.2.8.6.1

Each entry contains a single IP destination address.
This destination is either stored or not stored when
RIP reports from trusted neighbors are received. Each
entry also contains a metric to be used in the routing
ta…

Indexes

a3RipIpRcvPolPort a3RipIpRcvPolAddr

Column Syntax OID

a3RipIpRcvPolPort mandatory

This defines the port to which this entry applies.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.2.8.6.1.1

a3RipIpRcvPolAddr mandatory

This specifies a route destination that is to be stored
or not stored (based on a3RipIpRcvPolCtl) when RIP reports
from trusted neighbors are received.

RFC1155-SMIIpAddress

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.43.2.8.6.1.2

a3RipIpRcvPolMetric mandatory

The metric that is to be used in the routing table entry for
this route. It a metric value in the range of 1 to 15 is
specified, the route, together with the specified metric,
is stored. If the metric 0 is specified,…

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.43.2.8.6.1.3

a3RipIpRcvPolStatus mandatory

This object is used to add and delete entries
in this table. See the notes describing
RowStatus at the beginning of this MIB.

RowStatusr/w

Textual Convention: RowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.43.2.8.6.1.4

a3RipIpStaPolTable

table mandatory

.1.3.6.1.4.1.43.2.8.7 · 1 row entry · 4 columns

Open in standard view

The table contains a list of static addresses 
that are to be included or excluded from RIP reports.

a3RipIpStaPolEntry entry .1.3.6.1.4.1.43.2.8.7.1

Each entry contains a single IP destination address
representing a static route. This destination is either
included or excluded from RIP reports. Each entry also
contains a metric to be used in the reports.

Indexes

a3RipIpStaPolPort a3RipIpStaPolAddr

Column Syntax OID

a3RipIpStaPolPort mandatory

This defines the port to which this entry applies.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.2.8.7.1.1

a3RipIpStaPolAddr mandatory

This specifies a route destination learned statically
that is to be included or excluded (based on a3RipIpStaPolCtl)
from RIP reports.

RFC1155-SMIIpAddress

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.43.2.8.7.1.2

a3RipIpStaPolMetric mandatory

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.43.2.8.7.1.3

a3RipIpStaPolStatus mandatory

This object is used to add and delete entries
in this table. See the notes describing
RowStatus at the beginning of this MIB.

RowStatusr/w

Textual Convention: RowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.43.2.8.7.1.4

a3RipIpNeighborTable

table mandatory

.1.3.6.1.4.1.43.2.8.8 · 1 row entry · 3 columns

Open in standard view

This table contains a list of neighbor addresses that
RIP-IP uses to determine to which neighbors it should
send update packets.  RIP-IP neighbors are router
that share a common network and participate in the
RIP-IP protocol.  Each RIP-IP packet can be either broadcast
or addressed individually to each neighbor.  If no
neighbors are configured on the port, RIP broadcasts
update packets on the port.

a3RipIpNeighborEntry entry .1.3.6.1.4.1.43.2.8.8.1

Each entry contains information about a single
RIP-IP neighbor. The information include the
neighbor's IP address as well as the port from
which it can be reached.

Indexes

a3RipIpNeighborPort a3RipIpNeighborAddr

Column Syntax OID

a3RipIpNeighborPort mandatory

This indicates the port from which this neighbor
can be reached. The neighbor must be attached to
the same network as this port.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.2.8.8.1.1

a3RipIpNeighborAddr mandatory

This specifies the IP address of the RIP-IP neighbor.

RFC1155-SMIIpAddress

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.43.2.8.8.1.2

a3RipIpNeighborStatus mandatory

This object is used to add and delete entries
in this table. See the notes describing
RowStatus at the beginning of this MIB.

RowStatusr/w

Textual Convention: RowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.43.2.8.8.1.3

a3RipIpTrustedNbrTable

table mandatory

.1.3.6.1.4.1.43.2.8.9 · 1 row entry · 3 columns

Open in standard view

This table contains a list of RIP-IP neighbors 
from which RIP-IP accepts packets.  If this table
contains no entries for a particular port, RIP-IP
will accept all packets from that port.

a3RipIpTrustedNbrEntry entry .1.3.6.1.4.1.43.2.8.9.1

Each entry identifies a trusted neighbor from which
RIP-IP will accept routing packets.

Indexes

a3RipIpTrustedNbrPort a3RipIpTrustedNbrAddr

Column Syntax OID

a3RipIpTrustedNbrPort mandatory

This specifies the port for which this table entry
applies.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.43.2.8.9.1.1

a3RipIpTrustedNbrAddr mandatory

This identifies the IP address of a trusted neighbor
from which RIP-IP will accept (or not, depending on the value
of a3RipIpTrustedNbrCtl) routing packets.

RFC1155-SMIIpAddress

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.43.2.8.9.1.2

a3RipIpTrustedNbrStatus mandatory

This object is used to add and delete entries
in this table. See the notes describing
RowStatus at the beginning of this MIB.

RowStatusr/w

Textual Convention: RowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.43.2.8.9.1.3

a3RipIpImpMetTable

table mandatory

.1.3.6.1.4.1.43.2.8.10 · 1 row entry · 3 columns

Open in standard view

This table specifies the operations to be performed
on metrics imported from other routing update protocols
before they are reported by RIP.

a3RipIpImpMetEntry entry .1.3.6.1.4.1.43.2.8.10.1

Each entry specifies the operations to be performed
on the metric imported from a specific routing update
protocol before it is reported by RIP.

Indexes

a3RipIpImpMetProtocol

Column Syntax OID

a3RipIpImpMetProtocol mandatory

This object identifies the routing update protocol
from which metrics (and routes) are imported.

Enumeration

Enumerated Values:

1	ospf
2	iisis
3	egp
4	bgp
5	static

.1.3.6.1.4.1.43.2.8.10.1.1

a3RipIpImpMetOperation mandatory

This specifies the operation to be performed on the
native protocol metric before it is reported by RIP.

Enumerationr/w

Enumerated Values:

1	multiply
2	divide

.1.3.6.1.4.1.43.2.8.10.1.2

a3RipIpImpMetOperand mandatory

This specifies the operand of the operation specified
by the corresponding instance of a3RipIpImpMetOperation.
See the comments describing this table for more details.

If this object has the value 0, the …

Integer32r/w

Constraints:
range: 0-1073741823

.1.3.6.1.4.1.43.2.8.10.1.3