a3RipIpNetPolCtl
A3Com-RIP-IPextns-r4-MIB ·
.1.3.6.1.4.1.43.2.8.2.1.10
Object
column
mandatory
r/w
Enumeration
This parameter determines which routes are reported by
RIP-IP. The policies defined by this object and
a3RipIpNetPolTable overrides the policies defined in
a3RipIpIntPolCtl/Table, a3RipIpExtPolCtl/Table, and
a3RipIpStaPolCtl/Table in deciding whether a route
is to be reported.
If this is set to all (1), all routes are reported, provided
they are allowed by either the interior policy or exterior
policy. The metric that will be reported by RIP for all routes
is specified by a3RipIpNetPolAllMet.
If this is set to none (2), none of the routes
are reported.
If this is set to include (3), routes to destinations
listed in a3RipIpNetPolTable are reported.
If this is set to exclude (4), all routes
are reported except those listed in a3RipIpNetPolTable.
If no routes are listed, no routes will be reported.
The metric reported for routes learned via RIP
in this case is taken directly from the routing table or
from the results of applying one of the other policies.
(note, in all these cases, the Interior Policy or Exterior
Policy must be passed after this policy is applied. Only
those routes that pass both sets of policies will be
advertised).
If this objects gets changed from include to exclude,
or from exclude to include, all existing entries will
be flushed from the table.
Context
- MIB
- A3Com-RIP-IPextns-r4-MIB
- OID
.1.3.6.1.4.1.43.2.8.2.1.10- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- a3RipIpCtlEntry
- Table
- a3RipIpCtlTable
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | all |
2 | none |
3 | include |
4 | exclude |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a3RipIpPortIndex mandatory This provides the port index to which the RIP-IP
parameters in this table entry apply. | column | Integer32 | .1.3.6.1.4.1.43.2.8.2.1.1 |
| a3RipIpRcvPolCtl mandatory This parameter is used to filter routing updates
from trusted neighbors. It allows control over
which RIP routes are received and stored in the
routing table.
I… | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.11 |
| a3RipIpStaPolCtl mandatory This parameter is used to filter the reporting
of static routes. It allows control over
which static RIP routes are reported.
If this is set to all (1), all static… | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.12 |
| a3RipIpUnnAdvCtl mandatory This parameter specifies which routes are reported
by RIP updates sent over an unnumbered link.
If this object is set to subnetAdvUnn (1), RIP explicitly
reports each subnetted … | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.13 |
| a3RipIpBcastCtl mandatory This object specifies the destination IP address
to which RIP updates are sent over this port. If
this object is set to subnetBcast(1), the RIP
advertisement is sent using a dire… | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.14 |
| a3RipIpExtPolAllMet mandatory When a3RipIpExtPolCtl is set to all, this object specifies
the metric used in RIP updates of routes learned via EGP or BGP.
If this object is set to zero, the metric is calculate… | column | Integer32 | .1.3.6.1.4.1.43.2.8.2.1.15 |
| a3RipIpIntPolAllMet mandatory When a3RipIpIntPolCtl is set to all, this object specifies
the metric used in RIP updates of routes learned via OSPF or IISIS.
If this object is set to zero, the metric is calcul… | column | Integer32 | .1.3.6.1.4.1.43.2.8.2.1.16 |
| a3RipIpNetPolAllMet mandatory When a3RipIpNetPolCtl is set to all, this object specifies
the metric used in RIP updates of routes learned via RIP.
If this object is set to zero, the metric is taken directly f… | column | Integer32 | .1.3.6.1.4.1.43.2.8.2.1.17 |
| a3RipIpRcvPolAllMet mandatory When a3RipIpRcvPolCtl is set to all, this object specifies
the metric stored in the routing table when routing updates are
received via RIP (from trusted neighbors). | column | Integer32 | .1.3.6.1.4.1.43.2.8.2.1.18 |
| a3RipIpStaPolAllMet mandatory When a3RipIpStaPolCtl is set to all, this object specifies
the metric used in RIP updates of static routes (ie, those
routes entered by a user). If this object is set to zero, t… | column | Integer32 | .1.3.6.1.4.1.43.2.8.2.1.19 |
| a3RipIpTalkCtl mandatory If talk (1) is specified, RIP-IP sends update and
request packets on the specified port. If noTalk (2)
is specified, no updates or requests are sent over
this port.
… | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.2 |
| a3RipIpDynNbrCtl mandatory When a3RipIpDynNbrCtl is set to dynamicNbr over FR or X.25,
and -RIP CONTrol is set to TALK, the neighbor list is learnt
dynamically as InArp learn the IP addresses of the dlcis … | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.20 |
| a3RipIpAggregateCtl mandatory This parameter determines if RIP-IP aggregates
subnetworks with variable-length subnet masks
into one network. | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.21 |
| a3RipIpDeAggregateCtl mandatory This parameter determines if RIP-IP de-aggregate
a network into many subnetted network. | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.22 |
| a3RipIpNBMAmodeCtl mandatory This parameter determines if the underlying NBMA
network is full-mesh or non-mesh. Partial-mesh
is treated as non-mesh. When this object is set
to fullMesh(1), RIP-IP advertises… | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.23 |
| a3RipIpListenCtl mandatory If listen (1) is selected, RIP-IP receives and
processes incoming update and request packets. If
a3RipIpTalkCtl is set to noTalk (2), this system does
not send any response packe… | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.3 |
| a3RipIpTrustedNbrCtl mandatory This object controls how the list of trusted neighbors in
a3RipIpTrustedNbrTable is to be interpreted. If this is
set to include (1), RIP-IP will accept routing packets from
the … | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.4 |
| a3RipIpPoisonCtl mandatory This parameter determines how split horizon is
performed. To achieve split horizon, RIP-IP
refrains from advertising a route to a port if
the gateway for this route can be reache… | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.5 |
| a3RipIpTriggerCtl mandatory This parameter determines if RIP-IP sends trigger
update packets. Trigger update packets are
sent when a route's metric has changed. By
sending these update packets, RIP does no… | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.6 |
| a3RipIpDefMetric mandatory This parameter specifies whether RIP-IP advertises
the default route. The default route is the
network with internet address 0.0.0.0 and is
reported with a metric equal to the v… | column | Integer32 | .1.3.6.1.4.1.43.2.8.2.1.7 |
| a3RipIpExtPolCtl mandatory This parameter controls which routes learned
by the Exterior Gateway Protocol (EGP) are
reported by RIP-IP. If this is set to all (1),
all routes learned from EGP or BGP are repo… | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.8 |
| a3RipIpIntPolCtl mandatory This parameter determines which routes learned by
an Interior Gateway Protocol (IGP) are reported by RIP-IP.
If this is set to all (1), all routes learned from an… | column | Enumeration | .1.3.6.1.4.1.43.2.8.2.1.9 |