a3RipIpUnnAdvCtl

A3Com-RIP-IPextns-r4-MIB · .1.3.6.1.4.1.43.2.8.2.1.13

Object

column mandatory r/w Enumeration

This parameter specifies which routes are reported
by RIP updates sent over an unnumbered link.  
If this object is set to subnetAdvUnn (1), RIP explicitly
reports each subnetted route the system knows about.
If this object is set to netAdvUnn (2), RIP reports
only the IP network rather than each subnet.

Context

MIB: A3Com-RIP-IPextns-r4-MIB
OID: .1.3.6.1.4.1.43.2.8.2.1.13
Type: column
Access: readwrite
Status: mandatory
Parent: a3RipIpCtlEntry
Table: a3RipIpCtlTable
Siblings: 22

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	subnetAdvUnn
`2`	netAdvUnn

Related Objects

Sibling Objects

Object	Type	Syntax	OID
a3RipIpPortIndex mandatory This provides the port index to which the RIP-IP parameters in this table entry apply.	column	Integer32	`.1.3.6.1.4.1.43.2.8.2.1.1`
a3RipIpNetPolCtl mandatory This parameter determines which routes are reported by RIP-IP. The policies defined by this object and a3RipIpNetPolTable overrides the policies defined in a3RipIpIntPolCtl/Tab…	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.10`
a3RipIpRcvPolCtl mandatory This parameter is used to filter routing updates from trusted neighbors. It allows control over which RIP routes are received and stored in the routing table. I…	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.11`
a3RipIpStaPolCtl mandatory This parameter is used to filter the reporting of static routes. It allows control over which static RIP routes are reported. If this is set to all (1), all static…	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.12`
a3RipIpBcastCtl mandatory This object specifies the destination IP address to which RIP updates are sent over this port. If this object is set to subnetBcast(1), the RIP advertisement is sent using a dire…	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.14`
a3RipIpExtPolAllMet mandatory When a3RipIpExtPolCtl is set to all, this object specifies the metric used in RIP updates of routes learned via EGP or BGP. If this object is set to zero, the metric is calculate…	column	Integer32	`.1.3.6.1.4.1.43.2.8.2.1.15`
a3RipIpIntPolAllMet mandatory When a3RipIpIntPolCtl is set to all, this object specifies the metric used in RIP updates of routes learned via OSPF or IISIS. If this object is set to zero, the metric is calcul…	column	Integer32	`.1.3.6.1.4.1.43.2.8.2.1.16`
a3RipIpNetPolAllMet mandatory When a3RipIpNetPolCtl is set to all, this object specifies the metric used in RIP updates of routes learned via RIP. If this object is set to zero, the metric is taken directly f…	column	Integer32	`.1.3.6.1.4.1.43.2.8.2.1.17`
a3RipIpRcvPolAllMet mandatory When a3RipIpRcvPolCtl is set to all, this object specifies the metric stored in the routing table when routing updates are received via RIP (from trusted neighbors).	column	Integer32	`.1.3.6.1.4.1.43.2.8.2.1.18`
a3RipIpStaPolAllMet mandatory When a3RipIpStaPolCtl is set to all, this object specifies the metric used in RIP updates of static routes (ie, those routes entered by a user). If this object is set to zero, t…	column	Integer32	`.1.3.6.1.4.1.43.2.8.2.1.19`
a3RipIpTalkCtl mandatory If talk (1) is specified, RIP-IP sends update and request packets on the specified port. If noTalk (2) is specified, no updates or requests are sent over this port. …	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.2`
a3RipIpDynNbrCtl mandatory When a3RipIpDynNbrCtl is set to dynamicNbr over FR or X.25, and -RIP CONTrol is set to TALK, the neighbor list is learnt dynamically as InArp learn the IP addresses of the dlcis …	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.20`
a3RipIpAggregateCtl mandatory This parameter determines if RIP-IP aggregates subnetworks with variable-length subnet masks into one network.	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.21`
a3RipIpDeAggregateCtl mandatory This parameter determines if RIP-IP de-aggregate a network into many subnetted network.	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.22`
a3RipIpNBMAmodeCtl mandatory This parameter determines if the underlying NBMA network is full-mesh or non-mesh. Partial-mesh is treated as non-mesh. When this object is set to fullMesh(1), RIP-IP advertises…	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.23`
a3RipIpListenCtl mandatory If listen (1) is selected, RIP-IP receives and processes incoming update and request packets. If a3RipIpTalkCtl is set to noTalk (2), this system does not send any response packe…	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.3`
a3RipIpTrustedNbrCtl mandatory This object controls how the list of trusted neighbors in a3RipIpTrustedNbrTable is to be interpreted. If this is set to include (1), RIP-IP will accept routing packets from the …	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.4`
a3RipIpPoisonCtl mandatory This parameter determines how split horizon is performed. To achieve split horizon, RIP-IP refrains from advertising a route to a port if the gateway for this route can be reache…	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.5`
a3RipIpTriggerCtl mandatory This parameter determines if RIP-IP sends trigger update packets. Trigger update packets are sent when a route's metric has changed. By sending these update packets, RIP does no…	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.6`
a3RipIpDefMetric mandatory This parameter specifies whether RIP-IP advertises the default route. The default route is the network with internet address 0.0.0.0 and is reported with a metric equal to the v…	column	Integer32	`.1.3.6.1.4.1.43.2.8.2.1.7`
a3RipIpExtPolCtl mandatory This parameter controls which routes learned by the Exterior Gateway Protocol (EGP) are reported by RIP-IP. If this is set to all (1), all routes learned from EGP or BGP are repo…	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.8`
a3RipIpIntPolCtl mandatory This parameter determines which routes learned by an Interior Gateway Protocol (IGP) are reported by RIP-IP. If this is set to all (1), all routes learned from an…	column	Enumeration	`.1.3.6.1.4.1.43.2.8.2.1.9`