pwMplsOutboundLsrXcIndex

PW-MPLS-STD-R-MIB · .1.3.6.1.4.1.164.20.12.1.2.1.1
Commands MIB view Table view

Object

column r/w MPLS-LSR-STD-MIBMplsIndexType 
This object is applicable if pwMplsMplsType mplsNonTe(1)
bit is set, and MUST return a value of zero otherwise.
If the outer tunnel is signaled, the object is read-only
and indicates the XC index in the MPLS-LSR-STD-MIB of the
outer tunnel toward the peer. Otherwise (tunnel is set up
manually) the operator defines the XC index of the manually-
created outer tunnel through this object.

Context

MIB
PW-MPLS-STD-R-MIB
OID
.1.3.6.1.4.1.164.20.12.1.2.1.1
Type
column
Access
readwrite
Status
current
Parent
pwMplsOutboundEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-MPLS-STD-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-MPLS-STD-R-MIB::pwMplsOutboundLsrXcIndex'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'PW-MPLS-STD-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-MPLS-STD-R-MIB::pwMplsOutboundLsrXcIndex.<index>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'PW-MPLS-STD-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PW-MPLS-STD-R-MIB::pwMplsOutboundLsrXcIndex'

Syntax

MPLS-LSR-STD-MIBMplsIndexType
Source
MPLS-LSR-STD-MIBMplsIndexType
Base type
OctetString

Values & Constraints

Type Constraints
range: 1..24

Conformance

Member of
pwMplsOutboundMainGroup
Compliance refinements
pwMplsModuleFullCompliance readonly
A value other than zero MUST be supported if the
implementation supports non-TE signaling of the
outer tunnel.
A read-write access MUST be supported if the
implementation supports PW label manual setting
and carrying them over non-TE tunnels.
pwMplsModuleReadOnlyCompliance readonly
Write access is not required.
A value other than zero MUST be supported if the
implementation supports non-TE signaling of the
outer tunnel.