pwMplsOutboundEntry
PW-MPLS-STD-R-MIB ·
.1.3.6.1.4.1.164.20.12.1.2.1
Object
row
A row in this table configures the outer tunnel used for
carrying the PW traffic toward the PSN.
In the case of PW labels only, it configures the interface
that will carry the PW traffic.
An entry in this table augments the pwMplsEntry, and is
created automatically when the corresponding row has been
created by the agent in the pwMplsEntry.
This table points to the appropriate MPLS MIB module.
In the MPLS-TE case, the three variables relevant to the
indexing of a TE tunnel head-end (as used in the
MPLS-TE-STD-MIB) are to be configured, and the tunnel
instance indicates the LSP that is currently in use for
forwarding the traffic.
In case of signaled Non-TE MPLS (an outer tunnel label
assigned by LDP) the table points to the XC entry in the
LSR-STD-MIB. If the Non-TE MPLS tunnel is manually
configured, the operator configures the XC pointer to this
tunnel.
In case of PW label only (no outer tunnel) the ifIndex of
the port to carry the PW is configured here.
It is possible to associate a PW to one TE tunnel head-end
and a non-TE tunnel together. An indication in this table
will report the currently active one. In addition, in the
TE case the table reports the active tunnel instance
(i.e. the specific LSP in use).
Any read-write object in this table MAY be changed at any
time, however change of some objects (for example
MPLS-TE indexes) during PW forwarding state MAY cause traffic
disruption.
Context
- MIB
- PW-MPLS-STD-R-MIB
- OID
.1.3.6.1.4.1.164.20.12.1.2.1- Type
- row
- Status
- current
- Parent
- pwMplsOutboundTable
- Table
- pwMplsOutboundTable
- Children
- 7
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pwMplsOutboundLsrXcIndex This object is applicable if pwMplsMplsType mplsNonTe(1)
bit is set, and MUST return a value of zero otherwise.
If the outer tunnel is signaled, the object is read-only
and indica… | column | MPLS-LSR-STD-MIBMplsIndexType | .1.3.6.1.4.1.164.20.12.1.2.1.1 |
| pwMplsOutboundTunnelIndex This object is applicable if pwMplsMplsType mplsTe(0)
bit is set, and MUST return a value of zero otherwise.
It is part of the set of indexes for the outbound tunnel.
The operator… | column | MPLS-TC-STD-MIBMplsTunnelIndex | .1.3.6.1.4.1.164.20.12.1.2.1.2 |
| pwMplsOutboundTunnelInstance This object is applicable if pwMplsMplsType mplsTe(0)
bit is set, and MUST return a value of zero otherwise.
It indicates the actual tunnel instance that is currently
active and c… | column | MPLS-TC-STD-MIBMplsTunnelInstanceIndex | .1.3.6.1.4.1.164.20.12.1.2.1.3 |
| pwMplsOutboundTunnelLclLSR This object is applicable if pwMplsMplsType mplsTe(0)
bit is set, and MUST return a value of all zeros otherwise.
It is part of the set of indexes for the outbound tunnel.
The ope… | column | MPLS-TC-STD-MIBMplsLsrIdentifier | .1.3.6.1.4.1.164.20.12.1.2.1.4 |
| pwMplsOutboundTunnelPeerLSR This object is applicable if pwMplsMplsType mplsTe(0)
bit is set, and MUST return a value of zero otherwise.
It is part of the set of indexes for the outbound tunnel.
It is typica… | column | MPLS-TC-STD-MIBMplsLsrIdentifier | .1.3.6.1.4.1.164.20.12.1.2.1.5 |
| pwMplsOutboundIfIndex This object is applicable if pwMplsMplsType pwOnly(0)
bit is set, and MUST return a value of zero otherwise.
The operator configures the ifIndex of the outbound port
in this case. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.164.20.12.1.2.1.6 |
| pwMplsOutboundTunnelTypeInUse This object indicates the current tunnel that is carrying
the PW traffic.
The value of notYetKnown(1) should be used if the agent is
currently unable to determine which tunnel or … | column | Enumeration | .1.3.6.1.4.1.164.20.12.1.2.1.7 |