PW-MPLS-STD-R-MIB Table View

This table controls MPLS specific parameters when the PW is
going to be carried over MPLS PSN.

pwMplsEntry row .1.3.6.1.4.1.164.20.12.1.1.1

A row in this table represents parameters specific to MPLS
PSN for a pseudo-wire (PW). The row is created
automatically by the local agent if the pwPsnType is
MPLS. It is indexed by pwIndex, which uniquely
identifying a…

Indexes

PW-STD-R-MIBpwIndex

Column	Syntax	OID
pwMplsMplsType This object is set by the operator to indicate the outer tunnel types, if exists. mplsTe(0) is used if the outer tunnel is set up by MPLS-TE, and mplsNonTe(1) is used if the outer tunnel is set up by LDP or manually. Co…	Bitsr/w Enumerated Values: 0 mplsTe 1 mplsNonTe 2 pwOnly	.1.3.6.1.4.1.164.20.12.1.1.1.1
pwMplsExpBitsMode This object is set by the operator to determine the PW shim label EXP bits. The value of outerTunnel(1) is used where there is an outer tunnel - pwMplsMplsType equals to mplsTe(0) or mplsNonTe(1). Note that in this case…	Enumerationr/w Enumerated Values: 1 outerTunnel 2 specifiedValue 3 serviceDependant	.1.3.6.1.4.1.164.20.12.1.1.1.2
pwMplsExpBits This object is set by the operator to indicate the MPLS EXP bits to be used on the PW shim label if pwMplsExpBitsMode is specifiedValue(2), zero otherwise.	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.164.20.12.1.1.1.3
pwMplsTtl This object is set by the operator to indicate the PW TTL value to be used on the PW shim label.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.164.20.12.1.1.1.4
pwMplsLocalLdpID The local LDP identifier of the LDP entity creating this PW in the local node. As the PW labels are always set from the per-platform label space, the last two octets in the LDP ID MUST always both be zeros.	MPLS-TC-STD-MIBMplsLdpIdentifierr/w Type Constraints: range: 6	.1.3.6.1.4.1.164.20.12.1.1.1.5
pwMplsLocalLdpEntityIndex The local node LDP Entity Index of the LDP entity creating this PW.	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.164.20.12.1.1.1.6
pwMplsPeerLdpID The peer LDP identifier as identified from the LDP session. Should return the value of zero if not applicable or not known yet.	MPLS-TC-STD-MIBMplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.164.20.12.1.1.1.7
pwMplsStorageType This variable indicates the storage type for this row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.164.20.12.1.1.1.8

This table reports and configures the current outbound MPLS
tunnels (i.e. toward the PSN) or the physical interface in
the case of a PW label only that carries the PW traffic. It
also reports the current outer tunnel and LSP which forward
the PW traffic.

pwMplsOutboundEntry row .1.3.6.1.4.1.164.20.12.1.2.1

A row in this table configures the outer tunnel used for
carrying the PW traffic toward the PSN.
In the case of PW labels only, it configures the interface
that will carry the PW traffic.

An entry in this t…

Indexes

No indexes recorded

Column	Syntax	OID
pwMplsOutboundLsrXcIndex This object is applicable if pwMplsMplsType mplsNonTe(1) bit is set, and MUST return a value of zero otherwise. If the outer tunnel is signaled, the object is read-only and indicates the XC index in the MPLS-LSR-STD-MIB…	MPLS-LSR-STD-MIBMplsIndexTyper/w Type Constraints: range: 1..24	.1.3.6.1.4.1.164.20.12.1.2.1.1
pwMplsOutboundTunnelIndex This object is applicable if pwMplsMplsType mplsTe(0) bit is set, and MUST return a value of zero otherwise. It is part of the set of indexes for the outbound tunnel. The operator sets this object to represent the desir…	MPLS-TC-STD-MIBMplsTunnelIndexr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.164.20.12.1.2.1.2
pwMplsOutboundTunnelInstance This object is applicable if pwMplsMplsType mplsTe(0) bit is set, and MUST return a value of zero otherwise. It indicates the actual tunnel instance that is currently active and carrying the PW traffic. It SHOULD return…	MPLS-TC-STD-MIBMplsTunnelInstanceIndex Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.12.1.2.1.3
pwMplsOutboundTunnelLclLSR This object is applicable if pwMplsMplsType mplsTe(0) bit is set, and MUST return a value of all zeros otherwise. It is part of the set of indexes for the outbound tunnel. The operator sets this object to represent the …	MPLS-TC-STD-MIBMplsLsrIdentifierr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.20.12.1.2.1.4
pwMplsOutboundTunnelPeerLSR This object is applicable if pwMplsMplsType mplsTe(0) bit is set, and MUST return a value of zero otherwise. It is part of the set of indexes for the outbound tunnel. It is typically equals to pwPeerAddr.	MPLS-TC-STD-MIBMplsLsrIdentifierr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.20.12.1.2.1.5
pwMplsOutboundIfIndex This object is applicable if pwMplsMplsType pwOnly(0) bit is set, and MUST return a value of zero otherwise. The operator configures the ifIndex of the outbound port in this case.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.164.20.12.1.2.1.6
pwMplsOutboundTunnelTypeInUse This object indicates the current tunnel that is carrying the PW traffic. The value of notYetKnown(1) should be used if the agent is currently unable to determine which tunnel or interface is carrying the PW, for exampl…	Enumeration Enumerated Values: 1 notYetKnown 2 mplsTe 3 mplsNonTe 4 pwOnly	.1.3.6.1.4.1.164.20.12.1.2.1.7

This table indicates the PW LDP XC entry in the
MPLS-LSR-STD-MIB for signaled PWs.

pwMplsInboundEntry row .1.3.6.1.4.1.164.20.12.1.3.1

A row in this table is created by the agent
for each signaled PW, and shows the XC index related to
the PW signaling in the inbound direction in the
MPLS-LSR-STD-MIB that controls and display the information
for all the…

Indexes

PW-STD-R-MIBpwIndex

Column	Syntax	OID
pwMplsInboundXcIndex The XC index representing this PW in the inbound direction. It MUST return the value of zero if the information is not yet known.	MPLS-LSR-STD-MIBMplsIndexType Type Constraints: range: 1..24	.1.3.6.1.4.1.164.20.12.1.3.1.1

This table indicates the PW association to the outbound
Tunnel in non-TE applications, maps the PW to it's (inbound)
XC entry, and indicates the PW-to-physical interface mapping
for a PW without an outer tunnel.

pwMplsNonTeMappingEntry row .1.3.6.1.4.1.164.20.12.1.4.1

A row in this table displays the association
between the PW and
- its non-TE MPLS outbound outer Tunnel or,
- its XC entry in the MPLS-LSR-STD-MIB,
- its physical interface if there is no outer tunnel
(PW label only) …

Indexes

pwMplsNonTeMappingDirection pwMplsNonTeMappingXcIndex pwMplsNonTeMappingIfIndex pwMplsNonTeMappingPwIndex

Column	Syntax	OID
pwMplsNonTeMappingDirection Index for the conceptual XC row identifying the tunnel-to-PW mappings, indicating the direction of the packet flow for this entry. psnBound(1) indicates that the entry is related to packets toward the PSN. fromPsn(2) in…	Enumeration Enumerated Values: 1 psnBound 2 fromPsn	.1.3.6.1.4.1.164.20.12.1.4.1.1
pwMplsNonTeMappingXcIndex See the description clause of pwMplsNonTeMappingEntry for the usage guidelines of this object.	MPLS-LSR-STD-MIBMplsIndexType Type Constraints: range: 1..24	.1.3.6.1.4.1.164.20.12.1.4.1.2
pwMplsNonTeMappingIfIndex See the description clause of pwMplsNonTeMappingEntry for the usage guidelines of this object.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.164.20.12.1.4.1.3
pwMplsNonTeMappingPwIndex The value that represent the PW in the pwTable.	PW-TC-STD-R-MIBPwIndexType Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.164.20.12.1.4.1.4

This table reports the PW association to the
outbound MPLS tunnel for MPLS-TE applications.

pwMplsTeMappingEntry row .1.3.6.1.4.1.164.20.12.1.5.1

A row in this table represents the association
between a PW and its MPLS-TE outer (head-end) Tunnel.

An application can use this table to quickly retrieve the
list of the PWs that are configured on a specif…

Indexes

pwMplsTeMappingTunnelIndex pwMplsTeMappingTunnelInstance pwMplsTeMappingTunnelPeerLsrID pwMplsTeMappingTunnelLocalLsrID pwMplsTeMappingPwIndex

Column	Syntax	OID
pwMplsTeMappingTunnelIndex Primary index for the conceptual row identifying the MPLS-TE tunnel that is carrying the PW traffic.	MPLS-TC-STD-MIBMplsTunnelIndex Type Constraints: range: 0..65535	.1.3.6.1.4.1.164.20.12.1.5.1.1
pwMplsTeMappingTunnelInstance This object identifies the MPLS-TE LSP that is carrying the PW traffic. It MUST return the value of zero if the information of the specific LSP is not yet known. Note that based on the recommendation in the MPLS-TC-STD-…	MPLS-TC-STD-MIBMplsTunnelInstanceIndex Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.20.12.1.5.1.2
pwMplsTeMappingTunnelPeerLsrID This object identifies the Peer LSR when the outer tunnel is MPLS-TE.	MPLS-TC-STD-MIBMplsLsrIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.164.20.12.1.5.1.3
pwMplsTeMappingTunnelLocalLsrID This object identifies the local LSR.	MPLS-TC-STD-MIBMplsLsrIdentifier Type Constraints: range: 4	.1.3.6.1.4.1.164.20.12.1.5.1.4
pwMplsTeMappingPwIndex This object returns the value that represents the PW in the pwTable.	PW-TC-STD-R-MIBPwIndexType Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.164.20.12.1.5.1.5