PW-MPLS-STD-R-MIB
This MIB module complements the PW-STD-MIB module for PW
operation over MPLS.
Copyright (C) The IETF Trust (2006). This version
of this MIB module is part of RFC yyyy; see the RFC
itself for full legal notices.
-- RFC Ed.: replace yyyy with actual RFC number & remove
-- this note
- Source file
PW-MPLS-STD-R-MIB- Last revised
- Identity
pwMplsStdMIBR- Base OID
1.3.6.1.4.1.164.20.12
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| MPLS-LSR-STD-MIB | MplsIndexType |
| MPLS-TC-STD-MIB | MplsLdpIdentifier MplsLsrIdentifier MplsTunnelIndex MplsTunnelInstanceIndex |
| PW-STD-R-MIB | pwIndex |
| PW-TC-STD-R-MIB | PwIndexType |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) transmission Unsigned32 |
| SNMPv2-TC | StorageType |
Net-SNMP examples using the rad MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'PW-MPLS-STD-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PW-MPLS-STD-R-MIB::pwMplsStdMIBR'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-MPLS-STD-R-MIB' -M '/opt/observium/mibs/rad:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-MPLS-STD-R-MIB::pwMplsStdMIBR'
Objects (42)
Showing 42 of 42 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.164.20 |
||
.1.3.6.1.4.1.164.20.12 |
||
.1.3.6.1.4.1.164.20.12.0 |
||
.1.3.6.1.4.1.164.20.12.1 |
||
.1.3.6.1.4.1.164.20.12.1.1 |
||
.1.3.6.1.4.1.164.20.12.1.1.1 |
||
|
|
Bits
|
.1.3.6.1.4.1.164.20.12.1.1.1.1 |
|
Enumeration
|
.1.3.6.1.4.1.164.20.12.1.1.1.2 |
|
|
|
Unsigned32
|
.1.3.6.1.4.1.164.20.12.1.1.1.3 |
|
|
Unsigned32
|
.1.3.6.1.4.1.164.20.12.1.1.1.4 |
|
|
.1.3.6.1.4.1.164.20.12.1.1.1.5 |
|
|
Unsigned32
|
.1.3.6.1.4.1.164.20.12.1.1.1.6 |
|
.1.3.6.1.4.1.164.20.12.1.1.1.7 |
||
.1.3.6.1.4.1.164.20.12.1.1.1.8 |
||
.1.3.6.1.4.1.164.20.12.1.2 |
||
.1.3.6.1.4.1.164.20.12.1.2.1 |
||
.1.3.6.1.4.1.164.20.12.1.2.1.1 |
||
.1.3.6.1.4.1.164.20.12.1.2.1.2 |
||
.1.3.6.1.4.1.164.20.12.1.2.1.3 |
||
.1.3.6.1.4.1.164.20.12.1.2.1.4 |
||
.1.3.6.1.4.1.164.20.12.1.2.1.5 |
||
.1.3.6.1.4.1.164.20.12.1.2.1.6 |
||
|
Enumeration
|
.1.3.6.1.4.1.164.20.12.1.2.1.7 |
|
.1.3.6.1.4.1.164.20.12.1.3 |
||
.1.3.6.1.4.1.164.20.12.1.3.1 |
||
.1.3.6.1.4.1.164.20.12.1.3.1.1 |
||
.1.3.6.1.4.1.164.20.12.1.4 |
||
.1.3.6.1.4.1.164.20.12.1.4.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.164.20.12.1.4.1.1 |
|
.1.3.6.1.4.1.164.20.12.1.4.1.2 |
||
.1.3.6.1.4.1.164.20.12.1.4.1.3 |
||
.1.3.6.1.4.1.164.20.12.1.4.1.4 |
||
.1.3.6.1.4.1.164.20.12.1.5 |
||
.1.3.6.1.4.1.164.20.12.1.5.1 |
||
.1.3.6.1.4.1.164.20.12.1.5.1.1 |
||
.1.3.6.1.4.1.164.20.12.1.5.1.2 |
||
.1.3.6.1.4.1.164.20.12.1.5.1.3 |
||
.1.3.6.1.4.1.164.20.12.1.5.1.4 |
||
.1.3.6.1.4.1.164.20.12.1.5.1.5 |
||
.1.3.6.1.4.1.164.20.12.2 |
||
.1.3.6.1.4.1.164.20.12.2.1 |
||
.1.3.6.1.4.1.164.20.12.2.2 |
Dependencies (16) 8 direct · 8 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- IANA-ADDRESS-FAMILY-NUMBERS-MIBrfc
- INET-ADDRESS-MIBrfc
- MPLS-TC-STD-MIBrfc
- MPLS-LSR-STD-MIBrfc
- HC-PerfHist-TC-MIBrfc
- IANA-PWE3-R-MIBrad
- PerfHist-TC-MIBrfc
- PW-TC-STD-R-MIBrad
- SNMP-FRAMEWORK-MIBrfc
- PW-STD-R-MIBrad
- PW-MPLS-STD-R-MIBradselected
Conformance Groups (5)
|
pwMplsMplsType pwMplsExpBitsMode pwMplsExpBits pwMplsTtl pwMplsLocalLdpID pwMplsLocalLdpEntityIndex pwMplsPeerLdpID pwMplsStorageType
Collection of objects needed for PW over MPLS PSN
configuration. |
.1.3.6.1.4.1.164.20.12.2.1.1
|
|
|
Collection of objects needed for outbound association of
PW and MPLS tunnel. |
.1.3.6.1.4.1.164.20.12.2.1.2
|
|
|
pwMplsOutboundTunnelIndex pwMplsOutboundTunnelInstance pwMplsOutboundTunnelLclLSR pwMplsOutboundTunnelPeerLSR
Collection of objects needed for outbound association of
PW and MPLS TE tunnel. |
.1.3.6.1.4.1.164.20.12.2.1.3
|
|
|
Collection of objects needed for inbound PW presentation.
This group MUST be supported if PW signaling through LDP is used. |
.1.3.6.1.4.1.164.20.12.2.1.4
|
|
|
Collection of objects needed for mapping association of
PW and MPLS tunnel. |
.1.3.6.1.4.1.164.20.12.2.1.5
|
Compliance Statements (2)
OID
.1.3.6.1.4.1.164.20.12.2.2.1The compliance statement for agents that provide full
support for PW-MPLS MIB Module. Such devices can
then be monitored and also be configured using
this MIB module.
support for PW-MPLS MIB Module. Such devices can
then be monitored and also be configured using
this MIB module.
Required groups
| mandatory | pwMplsGroup | |
| mandatory | pwMplsOutboundMainGroup | |
| mandatory | pwMplsInboundGroup | |
| mandatory | pwMplsMappingGroup | |
| optional | pwMplsOutboundTeGroup |
This group MUST be supported if the implementation allows MPLS TE tunnels to carry PW traffic. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| pwMplsMplsType | Support of pwOnly(2) is not required. At least one of mplsTe(0) or mplsNonTe(1) MUST be supported if signaling of PW is supported. |
||
| pwMplsExpBitsMode | Support of specifiedValue(2) and serviceDependant(3) is optional. |
||
| pwMplsLocalLdpID | readonly | A read-write access is required if the implementation supports more than one LDP entity identifier for PW signaling. |
|
| pwMplsLocalLdpEntityIndex | readonly | A read-write access is required if the implementation supports more than one LDP entity index for PW signaling. |
|
| pwMplsOutboundLsrXcIndex | readonly | A value other than zero MUST be supported if the implementation supports non-TE signaling of the outer tunnel. A read-write access MUST be supported if the implementation supports PW label manual setting and carrying them over non-TE tunnels. |
|
| pwMplsOutboundIfIndex | readonly | A value other than zero and read-write operations MUST be supported if the implementation supports manually configured PW without MPLS outer tunnel. |
OID
.1.3.6.1.4.1.164.20.12.2.2.2The compliance statement for agents that provide read-
only support for the PW-MPLS-STD-MIB Module. Such
devices can then be monitored but cannot be configured
using this MIB module.
only support for the PW-MPLS-STD-MIB Module. Such
devices can then be monitored but cannot be configured
using this MIB module.
Required groups
| mandatory | pwMplsGroup | |
| mandatory | pwMplsOutboundMainGroup | |
| mandatory | pwMplsInboundGroup | |
| mandatory | pwMplsMappingGroup | |
| optional | pwMplsOutboundTeGroup |
This group MUST be supported if the implementation allows MPLS TE tunnels to carry PW traffic. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| pwMplsMplsType | readonly | Write access is not required. Support of pwOnly(2) is not required. At least one of mplsTe(0) or mplsNonTe(1) MUST be supported if signaling of PW is supported. |
|
| pwMplsExpBitsMode | readonly | Write access is not required. Support of specifiedValue(2) and serviceDependant(3) is optional. |
|
| pwMplsExpBits | readonly | Write access is not required. | |
| pwMplsTtl | readonly | Write access is not required. | |
| pwMplsLocalLdpID | readonly | Write access is not required. | |
| pwMplsLocalLdpEntityIndex | readonly | Write access is not required. | |
| pwMplsStorageType | readonly | Write access is not required. | |
| pwMplsOutboundLsrXcIndex | readonly | Write access is not required. A value other than zero MUST be supported if the implementation supports non-TE signaling of the outer tunnel. |
|
| pwMplsOutboundTunnelIndex | readonly | Write access is not required. | |
| pwMplsOutboundTunnelLclLSR | readonly | Write access is not required. | |
| pwMplsOutboundTunnelPeerLSR | readonly | Write access is not required. | |
| pwMplsOutboundIfIndex | readonly | Write access is not required. A value other than zero MUST be supported if the implementation supports manually configured PW without MPLS outer tunnel. |