pwCepPerfIntervalSummaryErrors
PW-CEP-STD-MIB ·
.1.3.6.1.2.1.200.1.6.1.19
Object
column
PerfHist-TC-MIBPerfIntervalCount
A summary of all the packet-error types above (from missing packets to bad length packets).
Context
- MIB
- PW-CEP-STD-MIB
- OID
.1.3.6.1.2.1.200.1.6.1.19- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pwCepPerfIntervalEntry
- Table
- pwCepPerfIntervalTable
- Siblings
- 22
Syntax
PerfHist-TC-MIBPerfIntervalCount
- Source
- PerfHist-TC-MIBPerfIntervalCount
- Base type
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pwCepPerfIntervalNumber A number (between 1 and 96 to cover a 24-hour
period) that identifies the interval for which the set
of statistics is available. The interval identified by 1
is the most recently… | column | Integer32 | .1.3.6.1.2.1.200.1.6.1.1 |
| pwCepPerfIntervalOutNegPtrAdjust Number of negative pointer adjustments seen on the
SONET path and encoded onto sent CEP packets. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.10 |
| pwCepPerfIntervalOutPosPtrAdjust Number of positive pointer adjustments seen on the
SONET path and encoded onto sent CEP packets. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.11 |
| pwCepPerfIntervalOutPtrAdjustSecs Number of seconds in which a positive or negative
pointer adjustment was seen on the SONET path. | column | seconds PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.12 |
| pwCepPerfIntervalAbsPtrAdjust The relative adjustment drift between inbound
and outbound streams.
It is calculated as absolute value of:
(InPosPtrAdjust - InNegPtrAdjust) -
(OutPosPtrAd… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.200.1.6.1.13 |
| pwCepPerfIntervalMissingPkts Number of missing packets (as detected via CEP header
sequence number gaps). | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.14 |
| pwCepPerfIntervalPktsOoseq Number of packets detected out of sequence (via CEP
header sequence numbers) but successfully reordered.
Note: Some implementations mat not support this
feature (see pwCepCfgPktRe… | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.15 |
| pwCepPerfIntervalPktsOoRngDropped Number of packets detected out of range (via CEP
header sequence numbers) and could not be reordered
or could not fit in the jitter buffer. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.16 |
| pwCepPerfIntervalJtrBfrUnderruns Number of times a packet needed to be played
out and the jitter buffer was empty. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.17 |
| pwCepPerfIntervalPktsMalformed Number of packets detected with unexpected size or bad
headers stack. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.18 |
| pwCepPerfIntervalValidData This variable indicates if the data for this interval
is valid. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.200.1.6.1.2 |
| pwCepPerfIntervalESs The counter associated with the number of Errored
Seconds encountered. | column | seconds PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.20 |
| pwCepPerfIntervalSESs The counter associated with the number of
Severely Errored Seconds encountered. | column | seconds PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.21 |
| pwCepPerfIntervalUASs The counter associated with the number of
Unavailable Seconds encountered. | column | seconds PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.22 |
| pwCepPerfIntervalFC CEP Failure Counts (FC-CEP). The number of CEP failure
events. A failure event begins when the LOPS failure
is declared and ends when the failure is cleared. A
failure event th… | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.23 |
| pwCepPerfIntervalReset Used in cases where the user knows that the errors
within this interval should not be counted. Writing
'reset' sets all error counts to zero. The value of
0 is not used here due… | column | Enumeration | .1.3.6.1.2.1.200.1.6.1.3 |
| pwCepPerfIntervalTimeElapsed The duration of a particular interval in seconds.
Adjustments in the system's time-of-day clock may
cause the interval to be greater or less than the
normal value. Therefore, thi… | column | seconds HC-PerfHist-TC-MIBHCPerfTimeElapsed | .1.3.6.1.2.1.200.1.6.1.4 |
| pwCepPerfIntervalDbaInPacketsHC Number of DBA packets received. | column | HC-PerfHist-TC-MIBHCPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.5 |
| pwCepPerfIntervalDbaOutPacketsHC Number of DBA packets sent. | column | HC-PerfHist-TC-MIBHCPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.6 |
| pwCepPerfIntervalInNegPtrAdjust Number of negative pointer adjustments sent on the
SONET path based on CEP pointer adjustments received. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.7 |
| pwCepPerfIntervalInPosPtrAdjust Number of positive pointer adjustments sent on the
SONET path based on CEP pointer adjustments received. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.8 |
| pwCepPerfIntervalInPtrAdjustSecs Number of seconds in which a positive or negative
pointer adjustment was sent on the SONET path. | column | seconds PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.9 |