pwCepPerfIntervalEntry
PW-CEP-STD-MIB ·
.1.3.6.1.2.1.200.1.6.1
Object
row
An entry in this table is created by the agent for
every pwCepPerfCurrentEntry that is 15 minutes old.
The contents of the Current entry are copied to the new
entry here. The Current entry then resets its counts
to zero for the next current 15-minute interval.
pwCepIndex is found in the pwCepCfg table.
Context
- MIB
- PW-CEP-STD-MIB
- OID
.1.3.6.1.2.1.200.1.6.1- Type
- row
- Status
- current
- Parent
- pwCepPerfIntervalTable
- Table
- pwCepPerfIntervalTable
- Children
- 23
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pwCepPerfIntervalNumber A number (between 1 and 96 to cover a 24-hour
period) that identifies the interval for which the set
of statistics is available. The interval identified by 1
is the most recently… | column | Integer32 | .1.3.6.1.2.1.200.1.6.1.1 |
| pwCepPerfIntervalOutNegPtrAdjust Number of negative pointer adjustments seen on the
SONET path and encoded onto sent CEP packets. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.10 |
| pwCepPerfIntervalOutPosPtrAdjust Number of positive pointer adjustments seen on the
SONET path and encoded onto sent CEP packets. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.11 |
| pwCepPerfIntervalOutPtrAdjustSecs Number of seconds in which a positive or negative
pointer adjustment was seen on the SONET path. | column | seconds PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.12 |
| pwCepPerfIntervalAbsPtrAdjust The relative adjustment drift between inbound
and outbound streams.
It is calculated as absolute value of:
(InPosPtrAdjust - InNegPtrAdjust) -
(OutPosPtrAd… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.200.1.6.1.13 |
| pwCepPerfIntervalMissingPkts Number of missing packets (as detected via CEP header
sequence number gaps). | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.14 |
| pwCepPerfIntervalPktsOoseq Number of packets detected out of sequence (via CEP
header sequence numbers) but successfully reordered.
Note: Some implementations mat not support this
feature (see pwCepCfgPktRe… | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.15 |
| pwCepPerfIntervalPktsOoRngDropped Number of packets detected out of range (via CEP
header sequence numbers) and could not be reordered
or could not fit in the jitter buffer. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.16 |
| pwCepPerfIntervalJtrBfrUnderruns Number of times a packet needed to be played
out and the jitter buffer was empty. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.17 |
| pwCepPerfIntervalPktsMalformed Number of packets detected with unexpected size or bad
headers stack. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.18 |
| pwCepPerfIntervalSummaryErrors A summary of all the packet-error types above (from
missing packets to bad length packets). | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.19 |
| pwCepPerfIntervalValidData This variable indicates if the data for this interval
is valid. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.200.1.6.1.2 |
| pwCepPerfIntervalESs The counter associated with the number of Errored
Seconds encountered. | column | seconds PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.20 |
| pwCepPerfIntervalSESs The counter associated with the number of
Severely Errored Seconds encountered. | column | seconds PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.21 |
| pwCepPerfIntervalUASs The counter associated with the number of
Unavailable Seconds encountered. | column | seconds PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.22 |
| pwCepPerfIntervalFC CEP Failure Counts (FC-CEP). The number of CEP failure
events. A failure event begins when the LOPS failure
is declared and ends when the failure is cleared. A
failure event th… | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.23 |
| pwCepPerfIntervalReset Used in cases where the user knows that the errors
within this interval should not be counted. Writing
'reset' sets all error counts to zero. The value of
0 is not used here due… | column | Enumeration | .1.3.6.1.2.1.200.1.6.1.3 |
| pwCepPerfIntervalTimeElapsed The duration of a particular interval in seconds.
Adjustments in the system's time-of-day clock may
cause the interval to be greater or less than the
normal value. Therefore, thi… | column | seconds HC-PerfHist-TC-MIBHCPerfTimeElapsed | .1.3.6.1.2.1.200.1.6.1.4 |
| pwCepPerfIntervalDbaInPacketsHC Number of DBA packets received. | column | HC-PerfHist-TC-MIBHCPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.5 |
| pwCepPerfIntervalDbaOutPacketsHC Number of DBA packets sent. | column | HC-PerfHist-TC-MIBHCPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.6 |
| pwCepPerfIntervalInNegPtrAdjust Number of negative pointer adjustments sent on the
SONET path based on CEP pointer adjustments received. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.7 |
| pwCepPerfIntervalInPosPtrAdjust Number of positive pointer adjustments sent on the
SONET path based on CEP pointer adjustments received. | column | PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.8 |
| pwCepPerfIntervalInPtrAdjustSecs Number of seconds in which a positive or negative
pointer adjustment was sent on the SONET path. | column | seconds PerfHist-TC-MIBPerfIntervalCount | .1.3.6.1.2.1.200.1.6.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| PW-STD-MIBpwIndex A unique index for the conceptual row identifying a PW within
this table. | column | PW-TC-STD-MIBPwIndexType | .1.3.6.1.2.1.10.246.1.2.1.1 |
| pwCepPerfIntervalNumber A number (between 1 and 96 to cover a 24-hour
period) that identifies the interval for which the set
of statistics is available. The interval identified by 1
is the most recently… | column | Integer32 | .1.3.6.1.2.1.200.1.6.1.1 |