PW-CEP-STD-MIB
This MIB module contains managed object definitions for
Circuit Emulation over Packet (CEP) as in [RFC4842]: Malis,
A., Prayson, P., Cohen, R., and D. Zelig. 'Synchronous
Optical Network/Synchronous Digital Hierarchy (SONET/SDH)
Circuit Emulation over Packet (CEP)', RFC 4842.
Copyright (c) 2011 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
- Source file
PW-CEP-STD-MIB- Last revised
- Identity
pwCepStdMIB- Base OID
1.3.6.1.2.1.200
Imported Objects
| HC-PerfHist-TC-MIB | HCPerfCurrentCount HCPerfIntervalCount HCPerfTimeElapsed HCPerfValidIntervals |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount |
| PW-STD-MIB | pwIndex |
| PW-TC-STD-MIB | PwCfgIndexOrzero |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 Integer32 mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'PW-CEP-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PW-CEP-STD-MIB::pwCepStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-CEP-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-CEP-STD-MIB::pwCepStdMIB'
Objects (129)
Showing 129 of 129 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.200 |
||
.1.3.6.1.2.1.200.1 |
||
.1.3.6.1.2.1.200.1.1 |
||
.1.3.6.1.2.1.200.1.1.1 |
||
|
|
Enumeration
|
.1.3.6.1.2.1.200.1.1.1.1 |
.1.3.6.1.2.1.200.1.1.1.2 |
||
|
Bits
|
.1.3.6.1.2.1.200.1.1.1.3 |
|
|
|
.1.3.6.1.2.1.200.1.1.1.4 |
|
.1.3.6.1.2.1.200.1.1.1.5 |
||
.1.3.6.1.2.1.200.1.1.1.6 |
||
|
|
Bits
|
.1.3.6.1.2.1.200.1.1.1.7 |
.1.3.6.1.2.1.200.1.1.1.8 |
||
.1.3.6.1.2.1.200.1.1.1.9 |
||
.1.3.6.1.2.1.200.1.2 |
||
.1.3.6.1.2.1.200.1.3 |
||
.1.3.6.1.2.1.200.1.3.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.200.1.3.1.1 |
|
|
Unsigned32
|
.1.3.6.1.2.1.200.1.3.1.10 |
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.200.1.3.1.11 |
|
|
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.200.1.3.1.12 |
|
secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.200.1.3.1.13 |
|
|
|
.1.3.6.1.2.1.200.1.3.1.14 |
|
.1.3.6.1.2.1.200.1.3.1.15 |
||
.1.3.6.1.2.1.200.1.3.1.16 |
||
.1.3.6.1.2.1.200.1.3.1.2 |
||
.1.3.6.1.2.1.200.1.3.1.3 |
||
.1.3.6.1.2.1.200.1.3.1.4 |
||
|
Bits
|
.1.3.6.1.2.1.200.1.3.1.5 |
|
.1.3.6.1.2.1.200.1.3.1.6 |
||
|
micro-secondsSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.200.1.3.1.7 |
|
.1.3.6.1.2.1.200.1.3.1.8 |
||
.1.3.6.1.2.1.200.1.3.1.9 |
||
.1.3.6.1.2.1.200.1.4 |
||
.1.3.6.1.2.1.200.1.4.1 |
||
.1.3.6.1.2.1.200.1.4.1.1 |
||
.1.3.6.1.2.1.200.1.4.1.10 |
||
.1.3.6.1.2.1.200.1.4.1.11 |
||
.1.3.6.1.2.1.200.1.4.1.12 |
||
.1.3.6.1.2.1.200.1.4.1.13 |
||
.1.3.6.1.2.1.200.1.4.1.14 |
||
.1.3.6.1.2.1.200.1.4.1.15 |
||
.1.3.6.1.2.1.200.1.4.1.16 |
||
.1.3.6.1.2.1.200.1.4.1.17 |
||
.1.3.6.1.2.1.200.1.4.1.18 |
||
.1.3.6.1.2.1.200.1.4.1.19 |
||
|
|
Enumeration
|
.1.3.6.1.2.1.200.1.4.1.2 |
.1.3.6.1.2.1.200.1.4.1.20 |
||
.1.3.6.1.2.1.200.1.4.1.21 |
||
.1.3.6.1.2.1.200.1.4.1.22 |
||
|
Bits
|
.1.3.6.1.2.1.200.1.4.1.3 |
|
|
|
.1.3.6.1.2.1.200.1.4.1.4 |
|
|
|
.1.3.6.1.2.1.200.1.4.1.5 |
|
|
|
.1.3.6.1.2.1.200.1.4.1.6 |
|
.1.3.6.1.2.1.200.1.4.1.7 |
||
|
Enumeration
|
.1.3.6.1.2.1.200.1.4.1.8 |
|
.1.3.6.1.2.1.200.1.4.1.9 |
||
.1.3.6.1.2.1.200.1.5 |
||
.1.3.6.1.2.1.200.1.5.1 |
||
.1.3.6.1.2.1.200.1.5.1.1 |
||
.1.3.6.1.2.1.200.1.5.1.10 |
||
.1.3.6.1.2.1.200.1.5.1.11 |
||
.1.3.6.1.2.1.200.1.5.1.12 |
||
.1.3.6.1.2.1.200.1.5.1.13 |
||
.1.3.6.1.2.1.200.1.5.1.14 |
||
.1.3.6.1.2.1.200.1.5.1.15 |
||
.1.3.6.1.2.1.200.1.5.1.16 |
||
.1.3.6.1.2.1.200.1.5.1.17 |
||
.1.3.6.1.2.1.200.1.5.1.18 |
||
.1.3.6.1.2.1.200.1.5.1.19 |
||
.1.3.6.1.2.1.200.1.5.1.2 |
||
.1.3.6.1.2.1.200.1.5.1.3 |
||
.1.3.6.1.2.1.200.1.5.1.4 |
||
.1.3.6.1.2.1.200.1.5.1.5 |
||
.1.3.6.1.2.1.200.1.5.1.6 |
||
.1.3.6.1.2.1.200.1.5.1.7 |
||
.1.3.6.1.2.1.200.1.5.1.8 |
||
.1.3.6.1.2.1.200.1.5.1.9 |
||
.1.3.6.1.2.1.200.1.6 |
||
.1.3.6.1.2.1.200.1.6.1 |
||
|
Integer32
|
.1.3.6.1.2.1.200.1.6.1.1 |
|
.1.3.6.1.2.1.200.1.6.1.10 |
||
.1.3.6.1.2.1.200.1.6.1.11 |
||
.1.3.6.1.2.1.200.1.6.1.12 |
||
.1.3.6.1.2.1.200.1.6.1.13 |
||
.1.3.6.1.2.1.200.1.6.1.14 |
||
.1.3.6.1.2.1.200.1.6.1.15 |
||
.1.3.6.1.2.1.200.1.6.1.16 |
||
.1.3.6.1.2.1.200.1.6.1.17 |
||
.1.3.6.1.2.1.200.1.6.1.18 |
||
.1.3.6.1.2.1.200.1.6.1.19 |
||
.1.3.6.1.2.1.200.1.6.1.2 |
||
.1.3.6.1.2.1.200.1.6.1.20 |
||
.1.3.6.1.2.1.200.1.6.1.21 |
||
.1.3.6.1.2.1.200.1.6.1.22 |
||
.1.3.6.1.2.1.200.1.6.1.23 |
||
|
Enumeration
|
.1.3.6.1.2.1.200.1.6.1.3 |
|
.1.3.6.1.2.1.200.1.6.1.4 |
||
.1.3.6.1.2.1.200.1.6.1.5 |
||
.1.3.6.1.2.1.200.1.6.1.6 |
||
.1.3.6.1.2.1.200.1.6.1.7 |
||
.1.3.6.1.2.1.200.1.6.1.8 |
||
.1.3.6.1.2.1.200.1.6.1.9 |
||
.1.3.6.1.2.1.200.1.7 |
||
.1.3.6.1.2.1.200.1.7.1 |
||
|
Unsigned32
|
.1.3.6.1.2.1.200.1.7.1.1 |
|
.1.3.6.1.2.1.200.1.7.1.10 |
||
|
secondsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.200.1.7.1.11 |
|
.1.3.6.1.2.1.200.1.7.1.12 |
||
.1.3.6.1.2.1.200.1.7.1.13 |
||
.1.3.6.1.2.1.200.1.7.1.14 |
||
.1.3.6.1.2.1.200.1.7.1.15 |
||
.1.3.6.1.2.1.200.1.7.1.16 |
||
.1.3.6.1.2.1.200.1.7.1.17 |
||
.1.3.6.1.2.1.200.1.7.1.18 |
||
|
secondsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.200.1.7.1.19 |
|
.1.3.6.1.2.1.200.1.7.1.2 |
||
|
secondsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.200.1.7.1.20 |
|
|
secondsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.200.1.7.1.21 |
|
.1.3.6.1.2.1.200.1.7.1.22 |
||
.1.3.6.1.2.1.200.1.7.1.3 |
||
.1.3.6.1.2.1.200.1.7.1.4 |
||
.1.3.6.1.2.1.200.1.7.1.5 |
||
.1.3.6.1.2.1.200.1.7.1.6 |
||
.1.3.6.1.2.1.200.1.7.1.7 |
||
|
secondsSNMPv2-SMICounter32
|
.1.3.6.1.2.1.200.1.7.1.8 |
|
.1.3.6.1.2.1.200.1.7.1.9 |
||
.1.3.6.1.2.1.200.2 |
||
.1.3.6.1.2.1.200.2.1 |
||
.1.3.6.1.2.1.200.2.2 |
Dependencies (13) 9 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- HC-PerfHist-TC-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- PerfHist-TC-MIBrfc
- IANA-PWE3-MIBrfc
- INET-ADDRESS-MIBrfc
- PW-TC-STD-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- PW-STD-MIBrfc
- PW-CEP-STD-MIBrfcselected
Type Definitions (4)
| Enumeration |
other(1)ds3(2)e3(3) |
|
| Unsigned32 | ||
| Unsigned32 | ||
| Unsigned32 |
Conformance Groups (9)
Compliance Statements (2)
OID
.1.3.6.1.2.1.200.2.2.1The compliance statement for agents that support
full CEP PW configuration through this MIB module.
full CEP PW configuration through this MIB module.
Required groups
| mandatory | pwCepGroup | |
| mandatory | pwCepCfgGroup | |
| mandatory | pwCepPerfCurrentGroup | |
| mandatory | pwCepPerfIntervalGroup | |
| mandatory | pwCepPerf1DayIntervalGroup | |
| optional | pwCepFractionalGroup |
This group is only mandatory for implementations that support fractional SPE. |
| optional | pwCepFractionalSts1Vc3Group |
This group is only mandatory for implementations that support the fractional STS-1/VC-3. |
| optional | pwCepFractionalVc4Group |
This group is only mandatory for implementations that support the fractional VC-4. |
| optional | pwCepSignalingGroup |
This group is only mandatory for implementations that support the CEP PW signaling. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| pwCepType | readonly |
Enumeration
spe(1)
|
The support of the value vt(2) or fracSpe(3) is optional. If either of these options are supported, read-write access is not required. |
| pwCepSonetPayloadLength | readonly | Write access is not required for implementations that support only the default values (which are based on the pwCepType). |
|
| pwCepCfgMinPktLength | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepCfgEnableDBA | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepCfgRtpHdrSuppress | readonly | Write access is not required for implementations that do not support RTP header for CEP connections. |
|
| pwCepCfgConsecPktsInsync | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepCfgConsecMissingOutSync | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepCfgPktErrorPlayOutValue | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepCfgMissingPktsToSes | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepCfgSesToUas | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepCfgSecsToExitUas | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepCfgName | readonly | Write access is not required. | |
| pwCepCfgRowStatus |
active(1), notInService(2), notReady(3)
|
Support for createAndWait is not required. | |
| pwCepFracMode | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepFracAsync | readonly |
other(1)
|
Support for ds3(2) or e3(3) and read-write access is not required if the implementations do not support these options. |
| pwCepFracVtgMap | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepFracEbm | readonly | Write access is not required for implementations where the EBM is derived from configuration in other MIB modules. |
|
| pwCepFracSdhVc4Mode | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepFracSdhVc4Tu3Map1 | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepFracSdhVc4Tu3Map2 | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepFracSdhVc4Tu3Map3 | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepFracSdhVc4Tug2Map1 | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepFracSdhVc4Tug2Map2 | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepFracSdhVc4Tug2Map3 | readonly | Write access is not required for implementations that support only a single predefined value. |
|
| pwCepFracSdhVc4Ebm1 | readonly | Write access is not required for implementations where the EBM is derived from configuration in other MIB modules. |
|
| pwCepFracSdhVc4Ebm2 | readonly | Write access is not required for implementations where the EBM is derived from configuration in other MIB modules. |
|
| pwCepFracSdhVc4Ebm3 | readonly | Write access is not required for implementations where the EBM is derived from configuration in other MIB modules. |
|
| pwCepFracRowStatus |
active(1), notInService(2), notReady(3)
|
Support for createAndWait is not required. |
OID
.1.3.6.1.2.1.200.2.2.2The compliance statement for agents that provide
read-only support for the PW CEP MIB Module. Such
devices can be monitored but cannot be configured
using this MIB module.
read-only support for the PW CEP MIB Module. Such
devices can be monitored but cannot be configured
using this MIB module.
Required groups
| mandatory | pwCepGroup | |
| mandatory | pwCepCfgGroup | |
| mandatory | pwCepPerfCurrentGroup | |
| mandatory | pwCepPerfIntervalGroup | |
| mandatory | pwCepPerf1DayIntervalGroup | |
| optional | pwCepFractionalGroup |
This group is only mandatory for implementations that support fractional SPE. |
| optional | pwCepFractionalSts1Vc3Group |
This group is only mandatory for implementations that support the fractional STS-1/VC-3. |
| optional | pwCepFractionalVc4Group |
This group is only mandatory for implementations that support the fractional VC-4. |
| optional | pwCepSignalingGroup |
This group is only mandatory for implementations that support the CEP PW signaling. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| pwCepType | readonly | Write access is not required. | |
| pwCepSonetIfIndex | readonly | Write access is not required. | |
| pwCepCfgIndex | readonly | Write access is not required. | |
| pwCepSonetPayloadLength | readonly | Write access is not required. | |
| pwCepCfgMinPktLength | readonly | Write access is not required. | |
| pwCepCfgEnableDBA | readonly | Write access is not required. | |
| pwCepCfgRtpHdrSuppress | readonly | Write access is not required. | |
| pwCepCfgJtrBfrDepth | readonly | Write access is not required. | |
| pwCepCfgConsecPktsInsync | readonly | Write access is not required. | |
| pwCepCfgConsecMissingOutSync | readonly | Write access is not required. | |
| pwCepCfgPktErrorPlayOutValue | readonly | Write access is not required. | |
| pwCepCfgMissingPktsToSes | readonly | Write access is not required. | |
| pwCepCfgSesToUas | readonly | Write access is not required. | |
| pwCepCfgSecsToExitUas | readonly | Write access is not required. | |
| pwCepCfgRowStatus | readonly | Write access is not required. | |
| pwCepCfgStorageType | readonly | Write access is not required. | |
| pwCepFracMode | readonly | Write access is not required. | |
| pwCepFracAsync | readonly | Write access is not required. | |
| pwCepFracVtgMap | readonly | Write access is not required. | |
| pwCepFracEbm | readonly | Write access is not required. | |
| pwCepFracSdhVc4Mode | readonly | Write access is not required. | |
| pwCepFracSdhVc4Tu3Map1 | readonly | Write access is not required. | |
| pwCepFracSdhVc4Tu3Map2 | readonly | Write access is not required. | |
| pwCepFracSdhVc4Tu3Map3 | readonly | Write access is not required. | |
| pwCepFracSdhVc4Tug2Map1 | readonly | Write access is not required. | |
| pwCepFracSdhVc4Tug2Map2 | readonly | Write access is not required. | |
| pwCepFracSdhVc4Tug2Map3 | readonly | Write access is not required. | |
| pwCepFracSdhVc4Ebm1 | readonly | Write access is not required. | |
| pwCepFracSdhVc4Ebm2 | readonly | Write access is not required. | |
| pwCepFracSdhVc4Ebm3 | readonly | Write access is not required. | |
| pwCepFracRowStatus | readonly | Write access is not required. | |
| pwCepFracStorageType | readonly | Write access is not required. |