pwCepPerfIntervalNumber

PW-CEP-STD-MIB · .1.3.6.1.2.1.200.1.6.1.1
MIB view Table view

Object

column Integer32 
A number (between 1 and 96 to cover a 24-hour
period) that identifies the interval for which the set
of statistics is available.  The interval identified by 1
is the most recently completed 15-minute interval, and
              
the interval identified by N is the interval immediately
preceding the one identified by N-1.  The minimum range of
N is 1 through 4.  The default range is 1 through 32.  The
maximum range of N is 1 through 96.

Context

MIB
PW-CEP-STD-MIB
OID
.1.3.6.1.2.1.200.1.6.1.1
Type
column
Access
noaccess
Status
current
Parent
pwCepPerfIntervalEntry
Table
pwCepPerfIntervalTable
Siblings
22

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-96

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pwCepPerfIntervalOutNegPtrAdjust
Number of negative pointer adjustments seen on the SONET path and encoded onto sent CEP packets.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.10
pwCepPerfIntervalOutPosPtrAdjust
Number of positive pointer adjustments seen on the SONET path and encoded onto sent CEP packets.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.11
pwCepPerfIntervalOutPtrAdjustSecs
Number of seconds in which a positive or negative pointer adjustment was seen on the SONET path.
columnseconds PerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.12
pwCepPerfIntervalAbsPtrAdjust
The relative adjustment drift between inbound and outbound streams. It is calculated as absolute value of: (InPosPtrAdjust - InNegPtrAdjust) - (OutPosPtrAd…
columnSNMPv2-SMIInteger32.1.3.6.1.2.1.200.1.6.1.13
pwCepPerfIntervalMissingPkts
Number of missing packets (as detected via CEP header sequence number gaps).
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.14
pwCepPerfIntervalPktsOoseq
Number of packets detected out of sequence (via CEP header sequence numbers) but successfully reordered. Note: Some implementations mat not support this feature (see pwCepCfgPktRe…
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.15
pwCepPerfIntervalPktsOoRngDropped
Number of packets detected out of range (via CEP header sequence numbers) and could not be reordered or could not fit in the jitter buffer.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.16
pwCepPerfIntervalJtrBfrUnderruns
Number of times a packet needed to be played out and the jitter buffer was empty.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.17
pwCepPerfIntervalPktsMalformed
Number of packets detected with unexpected size or bad headers stack.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.18
pwCepPerfIntervalSummaryErrors
A summary of all the packet-error types above (from missing packets to bad length packets).
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.19
pwCepPerfIntervalValidData
This variable indicates if the data for this interval is valid.
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.200.1.6.1.2
pwCepPerfIntervalESs
The counter associated with the number of Errored Seconds encountered.
columnseconds PerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.20
pwCepPerfIntervalSESs
The counter associated with the number of Severely Errored Seconds encountered.
columnseconds PerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.21
pwCepPerfIntervalUASs
The counter associated with the number of Unavailable Seconds encountered.
columnseconds PerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.22
pwCepPerfIntervalFC
CEP Failure Counts (FC-CEP). The number of CEP failure events. A failure event begins when the LOPS failure is declared and ends when the failure is cleared. A failure event th…
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.23
pwCepPerfIntervalReset
Used in cases where the user knows that the errors within this interval should not be counted. Writing 'reset' sets all error counts to zero. The value of 0 is not used here due…
columnEnumeration.1.3.6.1.2.1.200.1.6.1.3
pwCepPerfIntervalTimeElapsed
The duration of a particular interval in seconds. Adjustments in the system's time-of-day clock may cause the interval to be greater or less than the normal value. Therefore, thi…
columnseconds HC-PerfHist-TC-MIBHCPerfTimeElapsed.1.3.6.1.2.1.200.1.6.1.4
pwCepPerfIntervalDbaInPacketsHC
Number of DBA packets received.
columnHC-PerfHist-TC-MIBHCPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.5
pwCepPerfIntervalDbaOutPacketsHC
Number of DBA packets sent.
columnHC-PerfHist-TC-MIBHCPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.6
pwCepPerfIntervalInNegPtrAdjust
Number of negative pointer adjustments sent on the SONET path based on CEP pointer adjustments received.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.7
pwCepPerfIntervalInPosPtrAdjust
Number of positive pointer adjustments sent on the SONET path based on CEP pointer adjustments received.
columnPerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.8
pwCepPerfIntervalInPtrAdjustSecs
Number of seconds in which a positive or negative pointer adjustment was sent on the SONET path.
columnseconds PerfHist-TC-MIBPerfIntervalCount.1.3.6.1.2.1.200.1.6.1.9